From: Frank L. <mai...@hi...> - 2006-06-04 18:28:36
|
ok, but did you use the name of that user instead of the id? i have no idea if this makes a difference, but i use the user-name and it works. did you try it? adam schrieb: > yep 500 is the userid for testing > > > > > ..on Sun, Jun 04, 2006 at 08:19:22PM > +0200, Frank Leipold wrote: >> hmm, what is the 500? the userid? >> i use 'call sip:frank@10.0.0.1' and it works fine. >> >> >> >> adam schrieb: >>> hi, >>> >>> It seems there is not much documentation on linphone.org for linphonec, >>> and zero for the linphonerc >>> >>> i can get linphonec calling asterisk from my laptop, but not on >>> gumstix and they are on the same network...hmmm.....gumstix doesn't even >>> try and contact the server as far as i can see as the asterisk log doesnt >>> show any attempt >>> >>> this is the terminal output: >>> >>> # linphonec >>> NLS disabled. >>> Message:Found /dev/dsp. >>> Warning:dsp block size set to 2048. >>> Ready. >>> linphonec> call sip:500@82.94.217.147 >>> Contacting sip:500@82.94.217.147 >>> linphonec> Message:CALL_RELEASED >>> >>> Could not reach destination. >>> >>> >>> >>> I'll post anything i find out, if anyone has some ideas please let me know >>> :) >>> >>> adam >>> >>> >>> >>> >>> >>> >>> ..on Sun, Jun 04, 2006 at 07:19:45PM +0200, Frank Leipold wrote: >>>> i have never used it with asterisk or any other proxy. >>>> for now i have only tested it in my LAN/WLAN. >>>> >>>> there is very little documentation. >>>> did you try the official linphone page http://www.linphone.org . >>>> >>>> >>>> >>>> >>>> adam schrieb: >>>>> thanks, that helped! :) Linphonec now sees the card. However now i get a >>>>> "Could not reach destination" when I try and contact the asterisk >>>>> server...Is there a setting in ~.linphonec that I should tweak? (Is there >>>>> any docs online about configuring linphone for gumstix?) >>>>> >>>>> adam >>>>> >>>>> >>>>> >>>>> ..on Sun, Jun 04, 2006 at 06:58:03PM >>>>> +0200, Frank Leipold wrote: >>>>>> did you load the soundcard module? >>>>>> >>>>>> modprobe snd-pxa2xx-ac97 >>>>>> modprobe snd-pxa2xx-pcm >>>>>> modprobe snd-mixer-oss >>>>>> modprobe snd-pcm-oss >>>>>> >>>>>> maybe you need to use aumix to set the recording levels. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> adam schrieb: >>>>>>> hi, >>>>>>> >>>>>>> I just clipped on the soundcard to gumstix and i have a netCF card. I can >>>>>>> log in to my newly installed uImage which includes linphonec >>>>>>> >>>>>>> when I try and execute linphone I get this: >>>>>>> >>>>>>> # linphonec >>>>>>> NLS disabled. >>>>>>> Warning:No sound cards found ! >>>>>>> Warning:Sound card with index 0 does not exist. >>>>>>> Warning:Sound card with index 0 does not exist. >>>>>>> linphonecore.c:1488- assertionsndcard!=NULLfailed >>>>>>> linphonecore.c:1497- assertionsndcard!=NULLfailed >>>>>>> linphonecore.c:1577- assertionsndcard!=NULLfailed >>>>>>> Ready. >>>>>>> >>>>>>> >>>>>>> any ideas why I dont seem to have a soundcard? Do I nned to include any >>>>>>> specific packages when creating the uImage inorder to get the soundcard to >>>>>>> work? >>>>>>> >>>>>>> adam >>>>>>> >>>>>>> >>>>>> _______________________________________________ >>>>>> gumstix-users mailing list >>>>>> gum...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >>>> >>>> _______________________________________________ >>>> gumstix-users mailing list >>>> gum...@li... >>>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > |