From: Frank L. <mai...@hi...> - 2006-06-04 18:19:36
|
hmm, what is the 500? the userid? i use 'call sip:frank@10.0.0.1' and it works fine. adam schrieb: > hi, > > It seems there is not much documentation on linphone.org for linphonec, > and zero for the linphonerc > > i can get linphonec calling asterisk from my laptop, but not on > gumstix and they are on the same network...hmmm.....gumstix doesn't even > try and contact the server as far as i can see as the asterisk log doesnt > show any attempt > > this is the terminal output: > > # linphonec > NLS disabled. > Message:Found /dev/dsp. > Warning:dsp block size set to 2048. > Ready. > linphonec> call sip:500@82.94.217.147 > Contacting sip:500@82.94.217.147 > linphonec> Message:CALL_RELEASED > > Could not reach destination. > > > > I'll post anything i find out, if anyone has some ideas please let me know > :) > > adam > > > > > > > ..on Sun, Jun 04, 2006 at 07:19:45PM +0200, Frank Leipold wrote: >> i have never used it with asterisk or any other proxy. >> for now i have only tested it in my LAN/WLAN. >> >> there is very little documentation. >> did you try the official linphone page http://www.linphone.org . >> >> >> >> >> adam schrieb: >>> thanks, that helped! :) Linphonec now sees the card. However now i get a >>> "Could not reach destination" when I try and contact the asterisk >>> server...Is there a setting in ~.linphonec that I should tweak? (Is there >>> any docs online about configuring linphone for gumstix?) >>> >>> adam >>> >>> >>> >>> ..on Sun, Jun 04, 2006 at 06:58:03PM >>> +0200, Frank Leipold wrote: >>>> did you load the soundcard module? >>>> >>>> modprobe snd-pxa2xx-ac97 >>>> modprobe snd-pxa2xx-pcm >>>> modprobe snd-mixer-oss >>>> modprobe snd-pcm-oss >>>> >>>> maybe you need to use aumix to set the recording levels. >>>> >>>> >>>> >>>> >>>> adam schrieb: >>>>> hi, >>>>> >>>>> I just clipped on the soundcard to gumstix and i have a netCF card. I can >>>>> log in to my newly installed uImage which includes linphonec >>>>> >>>>> when I try and execute linphone I get this: >>>>> >>>>> # linphonec >>>>> NLS disabled. >>>>> Warning:No sound cards found ! >>>>> Warning:Sound card with index 0 does not exist. >>>>> Warning:Sound card with index 0 does not exist. >>>>> linphonecore.c:1488- assertionsndcard!=NULLfailed >>>>> linphonecore.c:1497- assertionsndcard!=NULLfailed >>>>> linphonecore.c:1577- assertionsndcard!=NULLfailed >>>>> Ready. >>>>> >>>>> >>>>> any ideas why I dont seem to have a soundcard? Do I nned to include any >>>>> specific packages when creating the uImage inorder to get the soundcard to >>>>> work? >>>>> >>>>> adam >>>>> >>>>> >>>> >>>> _______________________________________________ >>>> gumstix-users mailing list >>>> gum...@li... >>>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > |