From: Chris S. <chr...@gm...> - 2006-03-10 20:30:25
|
"uisp --wr_fuse_l=3D0xbf --wr_fuse_h=3D0xc2 --wr_fuse_e=3D0xff" This has made it *much* worse. I can't download anything to the Atmel and I can't change the fuse settings at all. Now I get: ./uisp An error has occurred during the AVR initialization. * Target status: Vendor Code =3D 0xff, Part Family =3D 0xff, Part Number =3D 0xff Check if the programmer is properly connected. The wiring may be incorrect or target might be 'damaged'. Of course, I haven't touched the wiring (Hirose) and googling around it seems that: "Generally, the "target damaged" error is received when the fuses become stuck in a certain position or the .... is no longer making good contact with the programming board." Is my Robostix hosed? Is there anyway to get out of this situation? Really, I just want to use the Robostix as a peripheral controller. I'm content to access everything via i2c from the gumstix. I don't want to do *any* programming for it, just the minimal configuration= . |