Menu
▾
▴
Re: [Gumstix-users] Bluetooth issue
|
From: Craig H. <cr...@gu...> - 2006-02-24 01:39:34
|
Just FYI the list to follow up on this thread -- it turns out that =20 David was accidentally shipped a gumstix without a bluetooth module =20 on it, which is why bluetooth is not working; we're following up with =20= him off-list to replace it with a bluetooth unit. C On Feb 21, 2006, at 12:30 PM, David Scanlan wrote: > > Craig, which chip on the GumStix, is the Bluetooth module? > > None of them have "PBA 313 07/1 or ROK104 001/2" written on them. > > > -----Original Message----- > From: gum...@li... > [mailto:gum...@li...] On Behalf Of =20 > Craig Hughes > Sent: 21 February 2006 19:18 > To: gum...@li... > Subject: Re: [Gumstix-users] Bluetooth issue > > David, what does the bluetooth module say on it? PBA 313 07/1 or > ROK104 001/2? > > C > > On Feb 21, 2006, at 6:01 AM, David Scanlan wrote: > >> OK, bit of an update. >> I have re-flashed with the latest sf stuff, and that all went fine >> but I now >> get different errors still about the Bluetooth and am starting to >> think it >> is a hardware problem! Heres some of the startup blurb which may be >> of use: >> >> Starting 32kHz clock.....Settled >> Set (AF1,out,set) via /proc/gpio/GPIO12 >> Starting Bluetooth subsystem:Trying baud rate 57600... >> Set (GPIO,out,clear) via /proc/gpio/GPIO7 >> Set (GPIO,out,set) via /proc/gpio/GPIO7 >> No response after reset >> No response from BT module >> Trying baud rate 115200... >> Set (GPIO,out,clear) via /proc/gpio/GPIO7 >> Starting network... >> udhcpc (v0.9.9-pre) started >> >> and now when I type hciconfig -a this is what I get :( >> >> # hciconfig -a >> Can't open HCI socket.: Address family not supported by protocol >> >> Help please...my projects starting to fall behind bigtime! >> >> Dave >> >> -----Original Message----- >> From: gum...@li... >> [mailto:gum...@li...] On Behalf Of David >> Scanlan >> Sent: 21 February 2006 09:53 >> To: gum...@li... >> Subject: RE: [Gumstix-users] Bluetooth issue >> >> # hciconfig hci0 up >> Can't init device hci0: Connection timed out (110) >> >> That's the error I'm getting...I'm assuming I don't have to do >> anything >> prior to running this on the gumstix or should it already be up? >> >> The output from dmesg seems to be ok I think: >> >> Bluetooth: Core ver 2.7 >> NET: Registered protocol family 31 >> Bluetooth: HCI device and connection manager initialized >> Bluetooth: HCI socket layer initialized >> Bluetooth: HCI UART driver ver 2.1 >> Bluetooth: HCI H4 protocol initialized >> Bluetooth: L2CAP ver 2.7 >> Bluetooth: L2CAP socket layer initialized >> Bluetooth: RFCOMM ver 1.5 >> Bluetooth: RFCOMM socket layer initialized >> Bluetooth: RFCOMM TTY layer initialized >> Bluetooth: BNEP (Ethernet Emulation) ver 1.2 >> Bluetooth: BNEP filters: protocol multicast >> IRQ58 (GPIO35): rising falling edges >> pxa2xx_udc: version 14-Dec-2003 >> . >> . >> . >> . >> usb0: Ethernet Gadget, version: Equinox 2004 >> usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep6in- >> bulk >> usb0: MAC 0a:00:2a:42:33:61 >> usb0: HOST MAC 0a:00:2a:42:33:62 >> usb0: RNDIS ready >> NET: Registered protocol family 17 >> usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC >> Ethernet >> Subset >> >> Any suggestions? Any other ways I could test this? Cheers >> >> Dave >> >> -----Original Message----- >> From: gum...@li... >> [mailto:gum...@li...] On Behalf Of >> Paul Coldrey >> Sent: 21 February 2006 03:38 >> To: gum...@li... >> Subject: Re: [Gumstix-users] Bluetooth issue >> >> What is the error message? >> >> David Scanlan wrote: >>> I am having this exact problem also. Do you have a solution yet? >>> >>> I am using the original image which it was shipped with quite >>> recently >>> (2.6.11gum) and have tried changing the baud rates as suggested in >>> another >>> post to no avail. Should hci0 be up automatically after boot? >>> Cheers >>> >>> Dave >>> >>> -----Original Message----- >>> From: gum...@li... >>> [mailto:gum...@li...] On Behalf Of Dick >> Davies >>> Sent: 07 February 2006 21:45 >>> To: gum...@li... >>> Subject: Re: [Gumstix-users] Bluetooth issue >>> >>> On 07/02/06, Braden Huber <hu...@ya...> wrote: >>> >>> >>>> When I do hciconfig -a the device shows up but it is in DOWN =20 >>>> status. >> Then >>>> >>> if I >>> >>>> do 'hciconfig hci0 up' it times out and gives an error message! >>>> >>> >>> Throw us a bone ? :) >>> >>> -- >>> Rasputin :: Jack of All Trades - Master of Nuns >>> http://number9.hellooperator.net/ >>> >>> >>> ------------------------------------------------------- >>> This SF.net email is sponsored by: Splunk Inc. Do you grep through >>> log >> files >>> for problems? Stop! Download the new AJAX search engine that makes >>> searching your log files as easy as surfing the web. DOWNLOAD >>> SPLUNK! >>> http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=103432&bid#0486&dat=121642= >>> _______________________________________________ >>> gumstix-users mailing list >>> gum...@li... >>> https://lists.sourceforge.net/lists/listinfo/gumstix-users >>> >>> >>> >> >> >> --=20 >> Paul Coldrey >> http://www.ensigma.com.au/ >> >> >> >> ------------------------------------------------------- >> This SF.net email is sponsored by: Splunk Inc. Do you grep through >> log files >> for problems? Stop! Download the new AJAX search engine that makes >> searching your log files as easy as surfing the web. DOWNLOAD >> SPLUNK! >> http://sel.as-us.falkag.net/sel? >> cmd=3Dlnk&kid=3D103432&bid=3D230486&dat=3D121642 >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> --=20 >> No virus found in this incoming message. >> Checked by AVG Free Edition. >> Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date: >> 2/17/2006 >> >> >> >> >> ------------------------------------------------------- >> This SF.net email is sponsored by: Splunk Inc. Do you grep through >> log files >> for problems? Stop! Download the new AJAX search engine that makes >> searching your log files as easy as surfing the web. DOWNLOAD >> SPLUNK! >> http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=103432&bid#0486&dat=121642 >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users >> >> >> --=20 >> No virus found in this incoming message. >> Checked by AVG Free Edition. >> Version: 7.1.375 / Virus Database: 267.15.12/265 - Release Date: >> 2/20/2006 >> >> >> >> >> ------------------------------------------------------- >> This SF.net email is sponsored by: Splunk Inc. Do you grep through >> log files >> for problems? Stop! Download the new AJAX search engine that makes >> searching your log files as easy as surfing the web. DOWNLOAD >> SPLUNK! >> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=103432&bid#0486&dat=12164= 2 >> _______________________________________________ >> gumstix-users mailing list >> gum...@li... >> https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through =20 > log files > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD =20 > SPLUNK! > http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=103432&bid#0486&dat=121642 > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users > > > --=20 > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.375 / Virus Database: 267.15.12/265 - Release Date: =20 > 2/20/2006 > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through =20 > log files > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD =20 > SPLUNK! > http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=103432&bid#0486&dat=121642= > _______________________________________________ > gumstix-users mailing list > gum...@li... > https://lists.sourceforge.net/lists/listinfo/gumstix-users |