Re: [Gumstix-users] 2.6.15--Are the patches for UCB1400 touch in there

[Craig H. <cr...@gu...>]

On Feb 2, 2006, at 1:22 PM, <tho...@be...> wrote:

> Wow!  That's great Craig.  Can't wait to try it out.
>
> Do you have any more specifics on the configuring for the "input"  
> stuff and UCB100  There seem to be bewildering number of options to  
> configure, some which have other configuration prereqs--I'm looking  
> for a simple How-to.

In the linux directory (after building the full buildroot), do:

make ARCH=arm CROSS_COMPILE=`pwd`/../staging_dir/bin/arm-linux-  
menuconfig

Now press key sequence:

d<enter>iiii<enter>monemknonty<enter>um<esc><esc><esc><esc><esc><esc><es 
c><esc><enter>

That will turn off the input stuff you don't need, and turn on the  
stuff you do need.  Then:

make ARCH=arm CROSS_COMPILE=`pwd`/../staging_dir/bin/arm-linux-

<wait>

cd ../..
make

Now your root_fs will have all the modules in it.  On the gumstix  
then after flashing the new root_fs:

modprobe snd-pxa2xx-ac97
modprobe ucb1x00-ts
modprobe evdev

You should now have a device which shows up under /dev/input/*

At least I think that's the sequence.

C