From: <tho...@be...> - 2005-10-02 22:47:39
|
The first time I tried reflashing a new rootfs, things didn't go so well. I never did find an app to check the crc on the linux (coLinux with Debian) before downloading, so I downloaded the rootfs three times to make sure I got the same CRC all three times. On the third time (with the same CRC), I tried reflashing the file system. The boot up load follows. The build seemed to go OK, except LOTS of warning messages when building Tinyx. One thought, do I HAVE to pass the boot arguments after configuring the kernel for LCD support (I didn't) to avoid a kernel panic? Any other ideas? If not, I guess I'll try rebuilding without Tinyx but with LCD configuration. Also, does it matter whether I configure for LCD support before or adding Tinyx? Finally, do I have to start from scratch, or are the makefiles smart enough to allow a "make clean" or something similar after removing the TARGETS+=TINYX from the top level makefile. Thanks, Dave Thomas *** Welcome to Gumstix ***: "Bootloader" U-Boot code: A3F00000 -> A3F2353C BSS: -> A3F585E0tFS" NET: Registere RAM Configuration: Bank #0: a0000000 64 MBing cache hash table of Flash: 16 MB 4Kbytes Using default environment TC SMC91C1111-0hash table e Hit any key to stop autoboot: 0es) ### JFFS2 loading 'boot/uImage' to 0xa2000000ash table entries: 4096 (order: 2, 16384 byte Scanning JFFS2 FS: ...... done. Loading modules: pxamci vfat nls_ Data Size: 732296 Bytes = 715.1 kBalizing random number generator... done. Load Address: a0008000 Set ( Entry Point: a0008000gpio/GPIO7 Verifying Checksum ... OKt (GPIO,out,set) via /proc/g OK/G Starting kernel ... Uncompressing Linux................................................. done, booti NET: Registered protocol family 31 ng the kernel.th: HCI device Linux version 2.6.11gum (dthomas@Gum-Debian) (gcc version 3.4.2) #2 Sat Sep 3 16 Bluetooth: HCI socket layer initialized :55:38 EDT 2005oth: HCI UART CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Bluetooth: RFCOMM TTY layer initia Machine: The Gumstix Platform Bluetooth: BNE Memory policy: ECC disabled, Data cache writeback Bluetooth: BNEP filters: Memory clock: 99.53MHz (*27) Run Mode clock: 398.13MHz (*4)CIA services: Linux Kernel Car Turbo Mode clock: 398.13MHz (*1.0, inactive) options: none Built 1 zonelists27) unbalanced fr Kernel command line: console=ttyS0,115200n8 root=1f02 rootfstype=jffs2 reboot=co cardmgr[302]: watching 1 socket ld,harddone. Memory: 63264KB available (1220K code, 228K data, 60K init) usb0: MAC 02:00:a8:41:fc:21 Mount-cache hash table entries: 512 (order: 0, 4096 bytes) usb0: RNDIS ready NET: Reg CPU: Testing write buffer coherency: ok Starting dropbear NET: Registered protocol family 16Starting httpd... NetWinder Floating Point Emulator V0.97 (double precision) Gumstix Linux Distribution! JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. Password: pc : [<c00a5f6c>] lr : [<c00a5fa8>] Not tainted sp : c0241f84 ip : c0241f94 fp : c0241f90 r10: 00000000 r9 : 00000000 r8 : 00000000 r7 : c0016e48 r6 : 00000000 r5 : c0240000 r4 : 00000100 r3 : 00000000 r2 : 00000100 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 Segment kernel Control: 397F Table: A0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc0240194) Stack: (0xc0241f84 to 0xc0242000) 1f80: c0241fb0 c0241f94 c00a5fa8 c00a5f6c c0015ef4 c0240000 00000000 1fa0: c0015f40 c0241fc0 c0241fb4 c00b6a04 c00a5f94 c0241fd4 c0241fc4 c00b6a48 1fc0: c00b69f4 00000000 c0241ff4 c0241fd8 c00170e0 c00b6a1c 00000000 00000000 1fe0: 00000000 00000000 00000000 c0241ff8 c002d63c c0017060 8db3d437 4c33cc15 Backtrace: [<c00a5f60>] (strlen+0x0/0x28) from [<c00a5fa8>] (strlcpy+0x20/0x58) [<c00a5f88>] (strlcpy+0x0/0x58) from [<c00b6a04>] (pxafb_setup+0x1c/0x28) r7 = C0015F40 r6 = 00000000 r5 = C0240000 r4 = C0015EF4 [<c00b69e8>] (pxafb_setup+0x0/0x28) from [<c00b6a48>] (pxafb_init+0x38/0x4c) [<c00b6a10>] (pxafb_init+0x0/0x4c) from [<c00170e0>] (init+0x8c/0x1c8) [<c0017054>] (init+0x0/0x1c8) from [<c002d63c>] (do_exit+0x0/0xaec) r7 = 00000000 r6 = 00000000 r5 = 00000000 r4 = 00000000 Code: e89da800 e1a0c00d e92dd800 e24cb004 (e5d03000) <0>Kernel panic - not syncing: Attempted to kill init! |