gull-users — Seagull users

[Seagull-users] Setting Digest-HA1 AVP in MAA(Diameter) using Seagull (1.8.2)

[agnivesh k. <kum...@gm...>]

Hi All,
                I was trying to use Seagull(1.8.2) as a *Diameter *server
for the Cx interface. In response to a MAR request, the script needs to
send a *MAA response* with “*Digest-HA1*” AVP (part of the grouped
SIP-Digest-Authenticate AVP, which in turn is part of the
SIP-Auth-Data-Item AVP) that contains H(A1). The Diameter Client(CSM) can
use H(A1) to calculate the expected Digest response, according to this
challenge.

                Based on Seagull Documentation, I tried both ways i.e. SIP
authentication and Radius authentication, but couldn’t succeed in getting
HA1 calculated as expected.

When I tried the SIP Authentication way as below in my scenario file, it
threw “2021-10-21.07:20:19.790|T|E_ACTION_SCEN_SET_VALUE_METHOD_EXTERN:
problem when using external method (md5 or AKA)” error.

<set-value name="Digest-HA1" method="authenticationSip"

format="username=alice;password=12345;auth=Digest
realm=\"open-ims.test\",
algorithm=MD5;method=REGISTER;uri=sip:testuri.com"></set-value>


When I tried the Radius Authentication way as below in my scenario file, I
see* junk value* being set for Digest-HA1 AVP.

<set-value name="Digest-HA1" method="authenticationRadius" message_part="all"
	format="shared_secret=9000000009@open-ims.test:open-ims.test:12345"></set-value>

AVP: Digest-HA1(121) l=24 f=-M- val=a\024\r\030�,����.�\032��\b
    AVP Code: 121 Digest-HA1
    AVP Flags: 0x40, Mandatory: Set
    AVP Length: 24
    Digest-HA1: a\024\r\030�,����.�\032��\b

I tried a few combinations like hard coding few/all parameters, reading
from the previous message with the action “store” etc. but couldn’t
succeed. Attaching scenario/dictionary files for your reference.
Can you please suggest if you are aware of any method (like
crypto_method_radius for Radius Auth) which I can use to set Digest-HA1
AVP. Thanks in advance.

Thanks,
Agnivesh K

[Seagull-users] Seagull Max Load(TPS) Limit

[Purohit, A. V. G. (External) <ase...@vo...>]

Hi ,

Please can someone help me understand the max load(TPS) that we can simulate using seagull for diameter Ro interface .

Regards,
Aseem



C2 General

[Seagull-users] Unable to increase TransactionPerSecond with TCP

[Kkgg <kk...@ya...>]

Hello All,

I am using TCP for transport protocol and trying to overload my target system with seagull however, I hit to 5K TPS limit with TCP. 
5K total TPS is same either I use one seagull server with 5K or two seagull servers 3K+2K.  It doesnt increase with multiple seagull clients. 

Do you know if this could work with higher TPS if SCTP is used? 

If I try to increase the TPS more, I start to see the following errors at Seagull screen:

send failed [-1] [Resource temporarily unavailable]
Flow control not implemented
send failed [-1] [Resource temporarily unavailable]
Flow control not implemented
send failed [-1] [Resource temporarily unavailable]
Flow control not implemented

I  need to have 20K TPS with a kind of solution. 

Additionally, I tried to use sctp for transport but failed to run it because of kernel sctp module. I dont know how to disable it yet. Kernel SCTP and Seagull sctp. Which of them could be performing better and could it be possible to choose one of them for seagull?

Best Regards,
Koray G.

[Seagull-users] Diameter Gym dictionary

[Hélio A. <he...@gm...>]

Hi Guys,

Do you have the Diameter Sy dictionary for seagull which you could share?

Thanks in advance.
Best regards,
Helio

[Seagull-users] Help on executing ANSI TCAP scenarios

[Swapna B <its...@gm...>]

Hello,

I am getting an error message stating libtrans_octcap.so is required while
executing tcap scenarios.
Can someone please help on how to get or build libtrans_octcap.so?

Thank you in advance!
- Swapna

[Seagull-users] Need working Seagull Scenario file for testing OCS

[Joseph A. <cjj...@gm...>]

Hi All,

Can anyone share a working scenario file inorder to test the Online
charging system.

-- 
Regards
Joseph Antony C.J

Re: [Seagull-users] NIDD

[Anton R. <ant...@gm...>]

Hi Robert,

It is not clear what you mean saying "the server doesn't recognise it". Can
you provide more details? Are both your endpoints simulated by seagull? Can
you share configs and scenario files?

Regards,
Anton


пн, 22 июл. 2019 г. в 19:13, Robert Hewitt <Rob...@te...>:

> Hi.
>
>
>
> I have just started using Seagull.
>
>
>
> I have created my own client and server scripts using a shared database of
> defintions.
>
>
>
> I send the 3gpp NIDD command, and the client log (and wireshark) decode
> well, but the server doesn’t recognise it.
>
>
>
> Can anyone help Please?
>
>
>
> Robert H
> _______________________________________________
> Gull-users mailing list
> Gul...@li...
> https://lists.sourceforge.net/lists/listinfo/gull-users
>

[Seagull-users] NIDD

[Robert H. <Rob...@te...>]

Hi.

I have just started using Seagull.

I have created my own client and server scripts using a shared database of defintions.

I send the 3gpp NIDD command, and the client log (and wireshark) decode well, but the server doesn't recognise it.

Can anyone help Please?

Robert H

[Seagull-users] Error in executing diameter client CC

[Rohit K. S. K. <r.s...@ve...>]

Hello,

I am trying to send CCR message from Seagull Diameter Client to my Diameter Server. I am running the following script:

./start_client_cc.ksh

But I get this error:

|E|Error [/usr/local/bin/lib_generalmethods.so: undefined symbol: ntp_time_secs]

What is the problem here? Please help.

Thanks
Rohit

[Seagull-users] configure Seagull as a Diameter Client and send CCR messages

[Rohit K. S. K. <r.s...@ve...>]

Hi,
I want to configure Seagull as a Diameter Client and send CCR messages to a Diameter Server. I tried the following configuration but it is not working. Please help.

File-ccr-cca.client.xml

<init>
  <send channel="channel-1">
    <command name="CER">
     <command name="CER">
      <avp name="Origin-Host" value="mundiotest_mme3"> </avp>
      <avp name="Origin-Realm" value="epc.mundio.mme.org"> </avp>
    <!--  <avp name="Host-IP-Address" value="0x0A1E036B"> </avp> <!-- IPV4 10.30.3.107-->
      <avp name="Vendor-Id" value="0"> </avp>
      <avp name="Product-Name" value="xgate"> </avp>
      <avp name="Inband-Security-Id" value="0"> </avp>
      <avp name="Auth-Application-Id" value="16777291"> </avp>
      <avp name="Firmware-Revision" value="1"> </avp>
    </command>
  </send>
</init>
</action>
    <command name="CCR">
      <avp name="Session-Id" value="value_is_replaced"> </avp>
      <avp name="Origin-Host" value="mundiotest_mme3"> </avp>
      <avp name="Origin-Realm" value="epc.mundio.mme.org"> </avp>
      <avp name="Host-IP-Address" value="0x0A1E036B"> </avp> <!-- IPV4 10.30.3.107-->
      <avp name="Destination-Realm" value="India-096-Test"> </avp>
      <avp name="Destination-Host" value="India-096"> </avp>
      <avp name="Vendor-Specific-Application-Id">
              <avp name="Vendor-Id" value="10415"></avp>
              <avp name="Auth-Application-Id" value="16777291"></avp>
      </avp>

File-ccr-cca.ro.client.xml

      <command name="CCR">
      <avp name="Session-Id" value="mundiotest_mme3"> </avp>
      <avp name="Origin-Host" value="seagull.mydomain.com"> </avp>
      <avp name="Origin-Realm" value="epc.mundio.mme.org"> </avp>
      <avp name="Host-IP-Address" value="0x0A1E036B"> </avp>
      <avp name="Destination-Realm" value="ExampleRealm"> </avp>
      <avp name="Vendor-Specific-Application-Id"> </avp>
        <avp name="Vendor-Id" value="10415"></avp>
        <avp name="Auth-Application-Id" value="4"></avp>
      </avp>
      <avp name="Auth-Application-Id" value="4"></avp>
      <avp name="Service-Context-Id" value="32...@3g..."> </avp>
      <avp name="CC-Request-Type" value="0x00000001"> </avp>
      <avp name="CC-Request-Number" value="0"> </avp>
    </command>
    <action>
      <start-timer></start-timer>
    </action>
  </send>

Please let me know if you need any additional information
Regards
Rohit kumar

[Seagull-users] SCTP -MultiHoming

[Sharma, R. <Rak...@te...>]

Hi Team,

Did you guys ever come across in establishing Seagull as HSS for DSR Testing.
I have invested significant amount of time in establishing MultiHoming SCTP connection between DSR & (SeaGull-HSS) but no luck.

Appreciate if you can take a look and suggest from your previous experience or check internally with SMEs. Sharing configuration & Scenario file.
In Init_ack SeaGull is not sending Secondary IP. However, I am able to establish multihoming when Seagull acting as a MME.

Regards,
-Rakesh Sharma

[Seagull-users] Stop the call after 2 hours

[Naseem R. <nas...@gm...>]

Hi,
Is it possible to configure that after starting the call, I want to auto
stop after 2 hours?
Thanks,
Naseem

[Seagull-users] Need Help in creating Scanrio

[jagadeesh k. <jka...@gm...>]

Hi,

I want to create a scenario like this.

CER ----->
<-----------CEA
CCR-I ---------->
<-----------CCA-I
CCR-U----------->
<------------CCA-U
CCR-U----------->
<------------CCA-U
----------------
--------------- (Multiple CCR-U with same session ID)

CCR-T------------->
<-------------CCA-T

Is there any way in seagull to iterate CCR-U multiple times with same
session ID ?

-- 
Thanks & Regards
Jagadeesh Adabala

[Seagull-users] Conditional scenario

[Igor R. <ig....@gm...>]

Hi,

is it possible to configure Seagull scenario conditionally? Like to 
change following requests if service authorization failed in initial 
request for example? Actually it would be needed to check some avp value 
with result code in received response and then adapt some other values 
in following requests.

Best regards!

Igor

Re: [Seagull-users] AVP values with double quotes

[David K. <g.d...@gm...>]

Glad it worked!

Dne pá 6. 4. 2018 2:16 dop. uživatel gates gates <gat...@gm...>
napsal:

> Hi David,
> Thanks a lot, this worked.
>
> The AVP was already defined as OctetString, I was earlier entering the
> actual value and tried different ways to add quotes and it failed.
>
> Now, I took the string converted it to hex and added '0x' as prefix and
> tried. This way seagull is actually sending out the quotes in the AVP value.
>  <avp name="Identifier"
> value="0x7265663d2275726e25334175726e2d37253341336770702d736572766963652e696d732e6963736922">
> </avp>
>
> Thanks again.
>
> On Thu, Apr 5, 2018 at 12:35 PM, David Krupička <
> g.d...@gm...> wrote:
>
>> Hi,
>>
>> my seagull knowledge is limited and I did not test it. Try to define the
>> AVP as OctetString, convert the string to hex and prepend the result with
>> 0x.. 0=zero
>> Or simply prohibit quotes in the ID's...
>>
>> BR
>> David
>>
>>
>> Dne čt 5. 4. 2018 6:27 odp. uživatel gates gates <gat...@gm...>
>> napsal:
>>
>>> Hi Anton,
>>> Thanks for the reply, but seagull is just taking it as text and in the
>>> diameter avp I can see the same "&quot;" and "%3B" being sent out as text
>>> in avp value without converting to symbol.
>>>
>>> Any other options I could try?
>>>
>>> Thanks.
>>>
>>> On Thu, Apr 5, 2018 at 7:31 AM, Anton Rozhkov <ant...@gm...
>>> > wrote:
>>>
>>>> Hi,
>>>>
>>>> You have colon encoded as %3A (%+ASCII code). Try the same for quotes -
>>>> %22
>>>> https://www.asciitable.com/
>>>>
>>>> Regards,
>>>> Anton
>>>>
>>>> 2018-04-05 17:23 GMT+03:00 gates gates <gat...@gm...>:
>>>>
>>>>> Yes, seagull reports an error when trying to run the scenario.
>>>>>
>>>>>
>>>>> On Wed, Apr 4, 2018 at 11:27 PM David Krupička <
>>>>> g.d...@gm...> wrote:
>>>>>
>>>>>> Hi, have you tried &quot; ? Not tested...
>>>>>> BR
>>>>>> David
>>>>>>
>>>>>> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...>
>>>>>> napsal:
>>>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> I am setting up seagull to use for Rx interface and I am running
>>>>>>> into an issue with an AVP that has quotes in the value itself. Is there an
>>>>>>> escape character I can use in seagull scenario xml file that will actually
>>>>>>> send the avp value with the quote in it?
>>>>>>>
>>>>>>> Ex: <avp name="Identifier"
>>>>>>> value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> </avp> (Note the quotes
>>>>>>> after 'ref=' and after 'icse', they are part of the avp value itself).
>>>>>>>
>>>>>>> Any one able to get this working?
>>>>>>>
>>>>>>> Thank you in-advance.
>>>>>>>
>>>>>>> Regards.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>>>> _______________________________________________
>>>>>>> Gull-users mailing list
>>>>>>> Gul...@li...
>>>>>>> https://lists.sourceforge.net/lists/listinfo/gull-users
>>>>>>>
>>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> Gull-users mailing list
>>>>> Gul...@li...
>>>>> https://lists.sourceforge.net/lists/listinfo/gull-users
>>>>>
>>>>>
>>>>
>>>
>

Re: [Seagull-users] AVP values with double quotes

[gates g. <gat...@gm...>]

Hi David,
Thanks a lot, this worked.

The AVP was already defined as OctetString, I was earlier entering the
actual value and tried different ways to add quotes and it failed.

Now, I took the string converted it to hex and added '0x' as prefix and
tried. This way seagull is actually sending out the quotes in the AVP value.
 <avp name="Identifier"
value="0x7265663d2275726e25334175726e2d37253341336770702d736572766963652e696d732e6963736922">
</avp>

Thanks again.

On Thu, Apr 5, 2018 at 12:35 PM, David Krupička <g.d...@gm...>
wrote:

> Hi,
>
> my seagull knowledge is limited and I did not test it. Try to define the
> AVP as OctetString, convert the string to hex and prepend the result with
> 0x.. 0=zero
> Or simply prohibit quotes in the ID's...
>
> BR
> David
>
>
> Dne čt 5. 4. 2018 6:27 odp. uživatel gates gates <gat...@gm...>
> napsal:
>
>> Hi Anton,
>> Thanks for the reply, but seagull is just taking it as text and in the
>> diameter avp I can see the same "&quot;" and "%3B" being sent out as text
>> in avp value without converting to symbol.
>>
>> Any other options I could try?
>>
>> Thanks.
>>
>> On Thu, Apr 5, 2018 at 7:31 AM, Anton Rozhkov <ant...@gm...>
>> wrote:
>>
>>> Hi,
>>>
>>> You have colon encoded as %3A (%+ASCII code). Try the same for quotes -
>>> %22
>>> https://www.asciitable.com/
>>>
>>> Regards,
>>> Anton
>>>
>>> 2018-04-05 17:23 GMT+03:00 gates gates <gat...@gm...>:
>>>
>>>> Yes, seagull reports an error when trying to run the scenario.
>>>>
>>>>
>>>> On Wed, Apr 4, 2018 at 11:27 PM David Krupička <
>>>> g.d...@gm...> wrote:
>>>>
>>>>> Hi, have you tried &quot; ? Not tested...
>>>>> BR
>>>>> David
>>>>>
>>>>> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...>
>>>>> napsal:
>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> I am setting up seagull to use for Rx interface and I am running into
>>>>>> an issue with an AVP that has quotes in the value itself. Is there an
>>>>>> escape character I can use in seagull scenario xml file that will actually
>>>>>> send the avp value with the quote in it?
>>>>>>
>>>>>> Ex: <avp name="Identifier" value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi"">
>>>>>> </avp> (Note the quotes after 'ref=' and after 'icse', they are part of the
>>>>>> avp value itself).
>>>>>>
>>>>>> Any one able to get this working?
>>>>>>
>>>>>> Thank you in-advance.
>>>>>>
>>>>>> Regards.
>>>>>>
>>>>>>
>>>>> ------------------------------------------------------------
>>>>>> ------------------
>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot______
>>>>>> _________________________________________
>>>>>> Gull-users mailing list
>>>>>> Gul...@li...
>>>>>> https://lists.sourceforge.net/lists/listinfo/gull-users
>>>>>>
>>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> Gull-users mailing list
>>>> Gul...@li...
>>>> https://lists.sourceforge.net/lists/listinfo/gull-users
>>>>
>>>>
>>>
>>

Re: [Seagull-users] AVP values with double quotes

[gates g. <gat...@gm...>]

Hi Anton,
Thanks for the reply, but seagull is just taking it as text and in the
diameter avp I can see the same """ and "%3B" being sent out as text
in avp value without converting to symbol.

Any other options I could try?

Thanks.

On Thu, Apr 5, 2018 at 7:31 AM, Anton Rozhkov <ant...@gm...>
wrote:

> Hi,
>
> You have colon encoded as %3A (%+ASCII code). Try the same for quotes - %22
> https://www.asciitable.com/
>
> Regards,
> Anton
>
> 2018-04-05 17:23 GMT+03:00 gates gates <gat...@gm...>:
>
>> Yes, seagull reports an error when trying to run the scenario.
>>
>>
>> On Wed, Apr 4, 2018 at 11:27 PM David Krupička <
>> g.d...@gm...> wrote:
>>
>>> Hi, have you tried &quot; ? Not tested...
>>> BR
>>> David
>>>
>>> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...>
>>> napsal:
>>>
>>>> Hello,
>>>>
>>>> I am setting up seagull to use for Rx interface and I am running into
>>>> an issue with an AVP that has quotes in the value itself. Is there an
>>>> escape character I can use in seagull scenario xml file that will actually
>>>> send the avp value with the quote in it?
>>>>
>>>> Ex: <avp name="Identifier" value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi"">
>>>> </avp> (Note the quotes after 'ref=' and after 'icse', they are part of the
>>>> avp value itself).
>>>>
>>>> Any one able to get this working?
>>>>
>>>> Thank you in-advance.
>>>>
>>>> Regards.
>>>>
>>>>
>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot______
>>>> _________________________________________
>>>> Gull-users mailing list
>>>> Gul...@li...
>>>> https://lists.sourceforge.net/lists/listinfo/gull-users
>>>>
>>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gull-users mailing list
>> Gul...@li...
>> https://lists.sourceforge.net/lists/listinfo/gull-users
>>
>>
>

Re: [Seagull-users] AVP values with double quotes

[Anton R. <ant...@gm...>]

Hi,

You have colon encoded as %3A (%+ASCII code). Try the same for quotes - %22
https://www.asciitable.com/

Regards,
Anton

2018-04-05 17:23 GMT+03:00 gates gates <gat...@gm...>:

> Yes, seagull reports an error when trying to run the scenario.
>
>
> On Wed, Apr 4, 2018 at 11:27 PM David Krupička <g.d...@gm...>
> wrote:
>
>> Hi, have you tried &quot; ? Not tested...
>> BR
>> David
>>
>> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...>
>> napsal:
>>
>>> Hello,
>>>
>>> I am setting up seagull to use for Rx interface and I am running into an
>>> issue with an AVP that has quotes in the value itself. Is there an escape
>>> character I can use in seagull scenario xml file that will actually send
>>> the avp value with the quote in it?
>>>
>>> Ex: <avp name="Identifier" value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi"">
>>> </avp> (Note the quotes after 'ref=' and after 'icse', they are part of the
>>> avp value itself).
>>>
>>> Any one able to get this working?
>>>
>>> Thank you in-advance.
>>>
>>> Regards.
>>>
>>>
>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot______
>>> _________________________________________
>>> Gull-users mailing list
>>> Gul...@li...
>>> https://lists.sourceforge.net/lists/listinfo/gull-users
>>>
>>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gull-users mailing list
> Gul...@li...
> https://lists.sourceforge.net/lists/listinfo/gull-users
>
>

Re: [Seagull-users] AVP values with double quotes

[gates g. <gat...@gm...>]

Yes, seagull reports an error when trying to run the scenario.


On Wed, Apr 4, 2018 at 11:27 PM David Krupička <g.d...@gm...>
wrote:

> Hi, have you tried &quot; ? Not tested...
> BR
> David
>
> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...>
> napsal:
>
>> Hello,
>>
>> I am setting up seagull to use for Rx interface and I am running into an
>> issue with an AVP that has quotes in the value itself. Is there an escape
>> character I can use in seagull scenario xml file that will actually send
>> the avp value with the quote in it?
>>
>> Ex: <avp name="Identifier"
>> value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> </avp> (Note the quotes
>> after 'ref=' and after 'icse', they are part of the avp value itself).
>>
>> Any one able to get this working?
>>
>> Thank you in-advance.
>>
>> Regards.
>>
>>
>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gull-users mailing list
>> Gul...@li...
>> https://lists.sourceforge.net/lists/listinfo/gull-users
>>
>

Re: [Seagull-users] AVP values with double quotes

[David K. <g.d...@gm...>]

Hi, have you tried " ? Not tested...
BR
David

Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...>
napsal:

> Hello,
>
> I am setting up seagull to use for Rx interface and I am running into an
> issue with an AVP that has quotes in the value itself. Is there an escape
> character I can use in seagull scenario xml file that will actually send
> the avp value with the quote in it?
>
> Ex: <avp name="Identifier"
> value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> </avp> (Note the quotes
> after 'ref=' and after 'icse', they are part of the avp value itself).
>
> Any one able to get this working?
>
> Thank you in-advance.
>
> Regards.
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gull-users mailing list
> Gul...@li...
> https://lists.sourceforge.net/lists/listinfo/gull-users
>

[Seagull-users] AVP values with double quotes

[gates g. <gat...@gm...>]

Hello,

I am setting up seagull to use for Rx interface and I am running into an
issue with an AVP that has quotes in the value itself. Is there an escape
character I can use in seagull scenario xml file that will actually send
the avp value with the quote in it?

Ex: <avp name="Identifier"
value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> </avp> (Note the quotes
after 'ref=' and after 'icse', they are part of the avp value itself).

Any one able to get this working?

Thank you in-advance.

Regards.

[Seagull-users] Not able to send DWA

[Shantiprakash S. <sha...@gm...>]

Hello,

I want to try scenario where I need to send CCRu after 180 seconds of
receiving CCAi. I have updated the scenario file accordingly to create the
delay.

But the problem is the simulator doesnt responds with DWA to the DWR it
receives from the server. Please help me to send the DWA.

Attaching the scenario and wireshark trace.

Regards,
Shantiprakash

Re: [Seagull-users] NEED TO RUN SINGLE DIAMETER CAL

[Konstantin T. <kt...@am...>]

Hello Asif,

Try set ‘number-calls’ property to ‘1’ in configuration file

<define entity="traffic-param" name="number-calls" value="1">

You can find more info here http://gull.sourceforge.net/doc/core.html#generic_config

Regards,
Konstantin.

From: Asif Ansari [mailto:asi...@gm...]
Sent: Wednesday, August 02, 2017 1:30 AM
To: gul...@li...
Subject: [Seagull-users] NEED TO RUN SINGLE DIAMETER CAL


Hi
I want to run just a single call with seagull but as soon as I start it starts sending multiple calls untill I do a quit.

Please suggest !!

--


Thanks and Regards
Md. Asif Ansari
Mobile: +91 9911562922
This message and the information contained herein is proprietary and confidential and subject to the Amdocs policy statement,

you may review at https://www.amdocs.com/about/email-disclaimer <https://www.amdocs.com/about/email-disclaimer>

[Seagull-users] NEED TO RUN SINGLE DIAMETER CAL

[Asif A. <asi...@gm...>]

Hi
I want to run just a single call with seagull but as soon as I start it
starts sending multiple calls untill I do a quit.

Please suggest !!

-- 

Thanks and Regards
Md. Asif Ansari
Mobile: +91 9911562922

[Seagull-users] suppressing "Unexpexted message that doesn't match the scenario" from the output of seagull

[Luis A. S. <lse...@ya...>]

Hello, 
I'm running seagull and for a given scenario I'm getting many  errors like this:
2017-05-15.20:07:22.383|E|Unexpexted message that doesn't match the scenario.2017-05-15.20:07:22.383|E|Activate 'T' log level2017-05-15.20:07:22.383|E|Unexpexted message that doesn't match the scenario.2017-05-15.20:07:22.383|E|Activate 'T' log level2017-05-15.20:07:22.387|E|Unexpexted message that doesn't match the scenario.2017-05-15.20:07:22.387|E|Activate 'T' log level|------------------------+---------------------------+-------------------------|| Start/Current Time     |       2017-05-15 19:59:20 |     2017-05-15 20:07:22 ||------------------------+---------------------------+-------------------------||    Counter Name        |      Periodic value       |     Cumulative value    ||------------------------+---------------------------+-------------------------|| Elapsed Time           | 00:00:01:000              | 00:08:02:159            || Call rate (/s)         |   50.000                  |   28.891                ||------------------------+---------------------------+-------------------------|| Incoming calls         |        0                  |        0                || Outgoing calls         |       50                  |    13930                || Msg Recv/s             |   50.000                  |   28.885                || Msg Sent/s             |   50.000                  |   28.891                || Unexpected msg         |       50                  |    13926                || Current calls          |        0                  |    0.000                ||------------------------+---------------------------+-------------------------|| Successful calls       |        0                  |        1                || Failed calls           |       50                  |    13929                || Refused calls          |        0                  |        0                || Aborted calls          |        0                  |        0                || Timeout calls          |        0                  |        0                ||------------------------+---------------------------+-------------------------|| Last Info              | Outgoing traffic                                    || Last Error             | No error                                            ||--- Next screen : Press key 1 ----------------------- [h]: Display help ------|2017-05-15.20:07:22.428|E|Unexpexted message that doesn't match the scenario.2017-05-15.20:07:22.428|E|Activate 'T' log level2017-05-15.20:07:22.436|E|Unexpexted message that doesn't match the scenario.2017-05-15.20:07:22.436|E|Activate 'T' log level2017-05-15.20:07:22.476|E|Unexpexted message that doesn't match the scenario.2017-05-15.20:07:22.476|E|Activate 'T' log level2017-05-15.20:07:22.479|E|Unexpexted message that doesn't match the scenario.2017-05-15.20:07:22.479|E|Activate 'T' log level2017-05-15.20:07:22.519|E|Unexpexted message that doesn't match the scenario.2017-05-15.20:07:22.519|E|Activate 'T' log level2017-05-15.20:07:22.522|E|Unexpexted message that doesn't match the scenario.

I have not been able to figure why I get the messages, however, is there a way  for them to not show in the screen? 
I mean I know they happen but they are not meaning anything important to me, can i silence them? 
Many thanksLuis