|
From: <by...@nc...> - 2016-09-19 23:26:34
|
Try this revision 1164. at the gtkwave command line add --rcvar "hier_ignore_escapes yes" You should see RCVAR | 'hier_ignore_escapes yes' FOUND ...and hopefully things will work the way you want. If not, let me know. Regards, -Tony Added hier_ignore_escapes rc variable. 511:/home/bybell/gtkwave/code/gtkwave3> svn commit Sending gtkwave3/ChangeLog Sending gtkwave3/doc/gtkwave.odt Sending gtkwave3/man/gtkwaverc.5 Sending gtkwave3/src/analyzer.c Sending gtkwave3/src/globals.c Sending gtkwave3/src/globals.h Sending gtkwave3/src/main.c Sending gtkwave3/src/rc.c Transmitting file data ........ Committed revision 1164. ---- by...@nc... wrote: > I'll look at how hierarchy is handled with respect to escaped identifiers when I find a little bit more time. > > For now, try turning off View->Dynamic Resize. Grab the pane divider and drag it hard to the left. (You might have to attempt this a couple of times or do it before you add signals.) You should be able to make it any size you want. > > -Tony > > ---- "Walter F.J. Mueller" <w.f...@re...> wrote: > > Hallo, > > > > I'm using > > - Xilinx Vivado 2016.2 > > - post-synthesis vhdl models generated by netlister > > - ghdl 0.34dev with ghw output > > - gtkwave V3.3.73 > > > > The generated models have sometimes signal names with '\', like > > > > top.tb_arty.uut.rlink.core.b2cd.\N_REGS[dataval]\ > > > > When I add them to the display the full hierarchy path is shown. > > That happens for any 'hier max' setting larger than 1. An exception > > is 'hier max' set to 1, in that case only the last name component > > is shown. > > > > See attached screen shot for 'hier max' equal 3, the signal > > names without '\' are shown with 3 name components, the ones > > with '\' with all, starting from 'top.'. > > > > This is quite a nuisance because the 'Signals' pane is always as > > wide as the longest name, and since full hierarchy path names tend > > to be rather long in generated models, the 'Waves' pane gets > > uncomfortably narrow. > > > > > > With best regards, Walter > > > > > > P.S.: Note that Vivado even generates signal names like > > top.tb_arty.uut.\SMRB.I0\.\<const0>\ > > top.tb_arty.uut.\SMRB.I0\.smrb.\RB_SRES[err]\ > > > > --> "SMRB.IO" apparently is one element of the hierarchy > > --> gtkwave handles that correctly in the SST display > > --> but again, always full path shown in 'Signals' pane > > > ------------------------------------------------------------------------------ > _______________________________________________ > Gtkwave-users mailing list > Gtk...@li... > https://lists.sourceforge.net/lists/listinfo/gtkwave-users |
