Re: [Gtkwave-users] Self-made format converter and transaction filter for gtkwave :)

[Fox M. <Qua...@gm...>]

I changed the implementation of the analyzer parameter. Now all
analyzers have internal default parameters set which you can overwrite
on commandline or within gtkwave in the arguments box. The new format
for the parameters are param=value (without space!) and you could
override only the needed parameters.

The default parameters for the SPI interpreter:
cs_low_active=1
msb_first=1
cpol=0
cpha=0
bus_width=8
impulse_time=0s

For the RS232 interpreter:
bitrate=9600
start_bits=1
data_bits=8
stop_bits=2
Parity=N
msb_first=0
ttl_level=1
show_sampletime=0
impulse_time=0s

For the digital caliper interpreter:
metric=1
impulse_time=0s

Ciao,
     Rainer