Re: [Gpsbabel-misc] Wintec WBT-201 ( G-Rays 2)

[Al B. <gps...@ml...>]

Am Mittwoch, 23. Mai 2007 14:27 schrieben Sie:

> You need to use the -t option to download tracks, -w to download
> waypoints. You can specify both.
>
> See the examples here:
>
> http://hexten.net/wiki/index.php/Wintec_GPSBabel_Usage

Hi Andy,

Thanks, I've been there and tried to understand the gpsbabel-documentation, 
but there are so many possibilities, so I have to ask.

gpsbabel -t -w -i wbt -f /dev/ttyUSB0 -o kml -F out.kml

creates the _first_ track only. The result can be displayed with GoogleEarth. 
How do I get _all_ stored tracks.

I never used "-i wbt,erase" as mentioned at 
http://hexten.net/wiki/index.php/Wintec_GPSBabel_Usage so there should be more 
than 1 track stored.



I tried
gpsbabel -t -w -i wbt -f /dev/ttyUSB0 -o csv -F out.csv

which comes closer to my needs for syncing with exiftool.

The output is
GPS Latitude,GPS Longitude,comment

At least I need the date, time and the altitude in this csv-file too. Latitude 
Ref, Longitude Ref and GPS Altitude Ref would be fine.

Does the stream contain also GPS Version ID, GPS Measure Mode, GPS Map Datum? 
I think these are default values. I use at the moment:

[EXIF]          0x0000 GPS Version ID                  : 2.2.0.0
[EXIF]          0x000a GPS Measure Mode                : 3-Dimensional 
[XMP]                - GPS Altitude Ref                : Above Sea Level


Any other recommendations how to create a textfile with the mentioned data is 
welcome of course.

Al