[Gpsbabel-misc] can't connect to garmin gpsmap 60cs from linux via usb

[Mark L. <ml...@gm...>]

I'm having trouble getting my garmin 60cs to talk to linux over usb.=20
Here's the error I get:

% ./gpsbabel -D9 -i garmin -f usb: -o gpx -F gps.txt
GPSBabel Version: 1.2.6
Sent: -110


Bad cmdsend r -110 sz 12
usb_bulk_write failed. 'No error'

This is on a debian system running linux-2.4.21, the garmin has
firmware version 4.0.  I've searched this list extensively for similar
errors and haven't seen anything.

The gps unit shows up in /proc/bus/usb/devices as the following:

C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D40 MxPwr=3D  0mA
I:  If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D09(hub  ) Sub=3D00 Prot=3D00 Driver=
=3Dhub
E:  Ad=3D81(I) Atr=3D03(Int.) MxPS=3D   8 Ivl=3D255ms
T:  Bus=3D02 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 10 Spd=3D12  MxC=
h=3D 0
D:  Ver=3D 1.10 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff MxPS=3D 8 #Cfgs=3D  1
P:  Vendor=3D091e ProdID=3D0003 Rev=3D 0.01

Any ideas?

Thanks,
Mark