This patch make:
- Users can use quality settings (not so nice way), but
for first....
- the media type, and printing method? fixed for a lot of
type of printers (the BJC-50,55,70,85,210,230,240,250
1000,2000,4000,4100,4200,4300 use these parameters
this way.)
- some color correction for BJC-2x00 and 1000 for BC-06
photo cartridge!! (now, the photo quality is near /or
better than/ windows's driver...)You have to try it!-
a new entry for BJ-230 (I don't know why forgot
before...)
There is an ugly media to media conversion, but not for
ever...
diff file to print-canon.c and printers.xml
Logged In: YES
user_id=5436
Could you please email it to the mailing list rather than
posting it here? More people will see it that way.
Logged In: YES
user_id=5436
This is almost surely incorrect; it indicates that all three
drop sizes have the same value (in terms of ink drop size).
Is that really your intention?
+ static const stp_simple_dither_range_t
canon_dither_ranges_pY_2bit[] =
+ {
+ { 1.000, 0x01, 1, 1 }, /* value, bit pattern, dark?,
rel. dot size */
+ { 1.000, 0x02, 1, 1 },
+ { 1.000, 0x03, 1, 1 }
+ };
Logged In: YES
user_id=57243
I send it to, mailing list...
Ink drop sizes:
It is not so important (I think), because this cheap trick
causes the following: the driver generate 01 pattern for
the most intensive yellow (a solid yellow area is
01 01 01 01 01 01 ...) like windows' driver, and I read in
the new-printer.dvi:
"The relative amount of ink actually deposited by this dot
(not currently used for much; it can be used for ink
reduction purposes, to reduce the amount of ink deposited
on the paper)."
If I use a simple NULL for yellow in 'variable ink list',
the driver produce an 11 11 11 11 pattern for highest
yellows instead of 01 01 01 ... It may look not too bad in
printing (I never see...), but may cause an unecessary
yellow ink deposit.!!The windows' driver use only 00 and 01
patterns for yellow
ink!!!
If you have a better solution, please correct this ugly
trick...
Gergely
Logged In: YES
user_id=5436
This is being discussed on gimp-print-devel. It will be
done post-4.2.
Logged In: YES
user_id=5436
This thing has been setting idle for a while. Peter, can
you take a look at it?
Logged In: YES
user_id=943591
is maybe good config
Logged In: YES
user_id=5436
Should have reassigned this a while ago.
Logged In: YES
user_id=1185323
Would you mind to update this patch and send it to the
list? The code has changed quite a bit and this is not a
unified diff.