Menu
▾
▴
[Gc-linux-cvs] linux/drivers/net Kconfig, 1.23, 1.24 Makefile, 1.20, 1.21
|
From: Albert H. <he...@us...> - 2007-02-19 23:07:38
|
Update of /cvsroot/gc-linux/linux/drivers/net In directory sc8-pr-cvs2.sourceforge.net:/tmp/cvs-serv7299/drivers/net Modified Files: Kconfig Makefile Log Message: Merged 2.6.20. Index: Makefile =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/net/Makefile,v retrieving revision 1.20 retrieving revision 1.21 diff -u -d -r1.20 -r1.21 --- Makefile 18 Feb 2007 22:56:02 -0000 1.20 +++ Makefile 19 Feb 2007 23:06:52 -0000 1.21 @@ -82,7 +82,7 @@ obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o -obj-$(CONFIG_MAC8390) += mac8390.o 8390.o +obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_SHAPER) += shaper.o @@ -90,7 +90,6 @@ obj-$(CONFIG_SMC9194) += smc9194.o obj-$(CONFIG_FEC) += fec.o obj-$(CONFIG_68360_ENET) += 68360enet.o -obj-$(CONFIG_ARM_ETHERH) += 8390.o obj-$(CONFIG_WD80x3) += wd.o 8390.o obj-$(CONFIG_EL2) += 3c503.o 8390.o obj-$(CONFIG_NE2000) += ne.o 8390.o @@ -107,8 +106,9 @@ obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o obj-$(CONFIG_B44) += b44.o obj-$(CONFIG_FORCEDETH) += forcedeth.o -obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o +obj-$(CONFIG_NE_H8300) += ne-h8300.o +obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o obj-$(CONFIG_QLA3XXX) += qla3xxx.o @@ -165,7 +165,7 @@ obj-$(CONFIG_LP486E) += lp486e.o obj-$(CONFIG_ETH16I) += eth16i.o -obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o +obj-$(CONFIG_ZORRO8390) += zorro8390.o obj-$(CONFIG_HPLANCE) += hplance.o 7990.o obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o obj-$(CONFIG_EQUALIZER) += eql.o @@ -178,7 +178,7 @@ obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o obj-$(CONFIG_A2065) += a2065.o -obj-$(CONFIG_HYDRA) += hydra.o 8390.o +obj-$(CONFIG_HYDRA) += hydra.o obj-$(CONFIG_ARIADNE) += ariadne.o obj-$(CONFIG_CS89x0) += cs89x0.o obj-$(CONFIG_MACSONIC) += macsonic.o @@ -198,6 +198,8 @@ obj-$(CONFIG_FEC_8XX) += fec_8xx/ obj-$(CONFIG_GAMECUBE_BBA) += gcn-bba.o +obj-$(CONFIG_MACB) += macb.o + obj-$(CONFIG_ARM) += arm/ obj-$(CONFIG_DEV_APPLETALK) += appletalk/ obj-$(CONFIG_TR) += tokenring/ @@ -215,3 +217,4 @@ obj-$(CONFIG_FS_ENET) += fs_enet/ +obj-$(CONFIG_NETXEN_NIC) += netxen/ Index: Kconfig =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/net/Kconfig,v retrieving revision 1.23 retrieving revision 1.24 diff -u -d -r1.23 -r1.24 --- Kconfig 18 Feb 2007 22:56:02 -0000 1.23 +++ Kconfig 19 Feb 2007 23:06:52 -0000 1.24 @@ -32,7 +32,7 @@ tristate "Intermediate Functional Block support" depends on NET_CLS_ACT ---help--- - This is an intermidiate driver that allows sharing of + This is an intermediate driver that allows sharing of resources. To compile this driver as a module, choose M here: the module will be called ifb. If you want to use more than one ifb @@ -188,6 +188,17 @@ or internal device. It is safe to say Y or M here even if your ethernet card lack MII. +config MACB + tristate "Atmel MACB support" + depends on NET_ETHERNET && AVR32 + select MII + help + The Atmel MACB ethernet interface is found on many AT32 and AT91 + parts. Say Y to include support for the MACB chip. + + To compile this driver as a module, choose M here: the module + will be called macb. + source "drivers/net/arm/Kconfig" config MACE @@ -1778,8 +1789,8 @@ information. config LAN_SAA9730 - bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)" - depends on NET_PCI && EXPERIMENTAL && MIPS + bool "Philips SAA9730 Ethernet support" + depends on NET_PCI && PCI && MIPS_ATLAS help The SAA9730 is a combined multimedia and peripheral controller used in thin clients, Internet access terminals, and diskless @@ -2145,7 +2156,7 @@ This driver supports the original Yukon chipset. A cleaner driver is also available (skge) which seems to work better than this one. - This driver does not support the newer Yukon2 chipset. A seperate + This driver does not support the newer Yukon2 chipset. A separate driver, sky2, is provided to support Yukon2-based adapters. The following adapters are supported by this driver: @@ -2260,6 +2271,14 @@ This driver supports the Gigabit Ethernet chips present on the Cell Processor-Based Blades from IBM. +config TSI108_ETH + tristate "Tundra TSI108 gigabit Ethernet support" + depends on TSI108_BRIDGE + help + This driver supports Tundra TSI108 gigabit Ethernet ports. + To compile this driver as a module, choose M here: the module + will be called tsi108_eth. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx || PPC_86xx @@ -2350,10 +2369,11 @@ config CHELSIO_T1 tristate "Chelsio 10Gb Ethernet support" depends on PCI + select CRC32 help - This driver supports Chelsio N110 and N210 models 10Gb Ethernet - cards. More information about adapter features and performance - tuning is in <file:Documentation/networking/cxgb.txt>. + This driver supports Chelsio gigabit and 10-gigabit + Ethernet cards. More information about adapter features and + performance tuning is in <file:Documentation/networking/cxgb.txt>. For general information about Chelsio and our products, visit our website at <http://www.chelsio.com>. @@ -2366,6 +2386,21 @@ To compile this driver as a module, choose M here: the module will be called cxgb. +config CHELSIO_T1_1G + bool "Chelsio gigabit Ethernet support" + depends on CHELSIO_T1 + help + Enables support for Chelsio's gigabit Ethernet PCI cards. If you + are using only 10G cards say 'N' here. + +config CHELSIO_T1_NAPI + bool "Use Rx Polling (NAPI)" + depends on CHELSIO_T1 + default y + help + NAPI is a driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. + config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS @@ -2456,6 +2491,12 @@ <file:Documentation/networking/net-modules.txt>. The module will be called myri10ge. +config NETXEN_NIC + tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" + depends on PCI + help + This enables the support for NetXen's Gigabit Ethernet card. + endmenu source "drivers/net/tokenring/Kconfig" |
