[Gc-linux-cvs] linux/drivers/net Kconfig, 1.22, 1.23 Makefile, 1.19, 1.20 gcn-bba.c, 1.10, 1.11

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Update of /cvsroot/gc-linux/linux/drivers/net
In directory sc8-pr-cvs2.sourceforge.net:/tmp/cvs-serv22637/drivers/net

Modified Files:
	Kconfig Makefile gcn-bba.c 
Log Message:
Merged 2.6.19.


Index: gcn-bba.c
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/net/gcn-bba.c,v
retrieving revision 1.10
retrieving revision 1.11
diff -u -d -r1.10 -r1.11

--- gcn-bba.c	24 Mar 2006 22:15:34 -0000	1.10
+++ gcn-bba.c	18 Feb 2007 22:56:02 -0000	1.11
@@ -17,7 +17,6 @@
 
 #define BBA_DEBUG
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>

Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/net/Makefile,v
retrieving revision 1.19
retrieving revision 1.20
diff -u -d -r1.19 -r1.20
--- Makefile	17 Feb 2007 23:43:41 -0000	1.19
+++ Makefile	18 Feb 2007 22:56:02 -0000	1.20
@@ -2,14 +2,11 @@
 # Makefile for the Linux network (ethercard) device drivers.
 #
 
-ifeq ($(CONFIG_ISDN_PPP),y)
-  obj-$(CONFIG_ISDN) += slhc.o
-endif
-
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_IBM_EMAC) += ibm_emac/
 obj-$(CONFIG_IXGB) += ixgb/
 obj-$(CONFIG_CHELSIO_T1) += chelsio/
+obj-$(CONFIG_EHEA) += ehea/
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 
@@ -113,8 +110,9 @@
 obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
 
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
+obj-$(CONFIG_QLA3XXX) += qla3xxx.o
 
-obj-$(CONFIG_PPP) += ppp_generic.o slhc.o
+obj-$(CONFIG_PPP) += ppp_generic.o
 obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
 obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
 obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
@@ -123,9 +121,7 @@
 obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
 
 obj-$(CONFIG_SLIP) += slip.o
-ifeq ($(CONFIG_SLIP_COMPRESSED),y)
-  obj-$(CONFIG_SLIP) += slhc.o
-endif
+obj-$(CONFIG_SLHC) += slhc.o
 
 obj-$(CONFIG_DUMMY) += dummy.o
 obj-$(CONFIG_IFB) += ifb.o
@@ -174,7 +170,6 @@
 obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
 obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
-obj-$(CONFIG_MIPS_GT96100ETH) += gt96100eth.o
 obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
 obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/net/Kconfig,v
retrieving revision 1.22
retrieving revision 1.23
diff -u -d -r1.22 -r1.23
--- Kconfig	17 Feb 2007 23:43:41 -0000	1.22
+++ Kconfig	18 Feb 2007 22:56:02 -0000	1.23
@@ -24,6 +24,9 @@
 
 	  If unsure, say Y.
 
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
 
 config IFB
 	tristate "Intermediate Functional Block support"
@@ -447,12 +450,6 @@
 	  This is the driver for the onboard card of MIPS Magnum 4000,
 	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
 
-config MIPS_GT96100ETH
-	bool "MIPS GT96100 Ethernet support"
-	depends on NET_ETHERNET && MIPS_GT96100
-	help
-	  Say Y here to support the Ethernet subsystem on your GT96100 card.
-
 config MIPS_AU1X00_ENET
 	bool "MIPS AU1000 Ethernet support"
 	depends on NET_ETHERNET && SOC_AU1X00
@@ -498,7 +495,7 @@
 
 config MIPS_SIM_NET
 	tristate "MIPS simulator Network device (EXPERIMENTAL)"
-	depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL
+	depends on MIPS_SIM && EXPERIMENTAL
 	help
 	  The MIPSNET device is a simple Ethernet network device which is
 	  emulated by the MIPS Simulator.
@@ -1309,6 +1306,23 @@
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called pcnet32.
 
+config PCNET32_NAPI
+	bool "Use RX polling (NAPI) (EXPERIMENTAL)"
+	depends on PCNET32 && EXPERIMENTAL
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
+
 config AMD8111_ETH
 	tristate "AMD 8111 (new PCI lance) support"
 	depends on NET_PCI && PCI
@@ -1420,6 +1434,22 @@
 	  <file:Documentation/networking/net-modules.txt>.  The module will be
 	  called forcedeth.
 
+config FORCEDETH_NAPI
+	bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+	depends on FORCEDETH && EXPERIMENTAL
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card. It is
+	  still somewhat experimental and thus not yet enabled by default.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
+	  If in doubt, say N.
 
 config CS89x0
 	tristate "CS89x0 support"
@@ -2091,16 +2121,16 @@
 
 config SKY2
 	tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	depends on PCI
 	select CRC32
 	---help---
-	  This driver supports Gigabit Ethernet adapters based on the the
+	  This driver supports Gigabit Ethernet adapters based on the
 	  Marvell Yukon 2 chipset:
 	  Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
 	  88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
 
-	  This driver does not support the original Yukon chipset: a seperate
-	  driver, skge, is provided for Yukon-based adapters.
+	  There is companion driver for the older Marvell Yukon and
+	  Genesis based adapters: skge.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called sky2.  This is recommended.
@@ -2267,11 +2297,11 @@
 
 config UGETH_HAS_GIGA
 	bool
-	depends on UCC_GETH && MPC836x
+	depends on UCC_GETH && PPC_MPC836x
 
 config MV643XX_ETH
 	tristate "MV-643XX Ethernet support"
-	depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM
+	depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
 	select MII
 	help
 	  This driver supports the gigabit Ethernet on the Marvell MV643XX
@@ -2299,6 +2329,15 @@
 	  This enables support for Port 2 of the Marvell MV643XX Gigabit
 	  Ethernet.
 
+config QLA3XXX
+	tristate "QLogic QLA3XXX Network Driver Support"
+	depends on PCI
+	help
+	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qla3xxx.
+
 endmenu
 
 #
@@ -2327,6 +2366,15 @@
           To compile this driver as a module, choose M here: the module
           will be called cxgb.
 
+config EHEA
+	tristate "eHEA Ethernet support"
+	depends on IBMEBUS
+	---help---
+	  This driver supports the IBM pSeries eHEA ethernet adapter.
+
+	  To compile the driver as a module, choose M here. The module
+	  will be called ehea.
+
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
 	depends on PCI
@@ -2428,7 +2476,7 @@
 
 config RIONET
 	tristate "RapidIO Ethernet over messaging driver support"
-	depends on NETDEVICES && RAPIDIO
+	depends on RAPIDIO
 
 config RIONET_TX_SIZE
 	int "Number of outbound queue entries"
@@ -2559,6 +2607,7 @@
 
 config PPP
 	tristate "PPP (point-to-point protocol) support"
+	select SLHC
 	---help---
 	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
 	  the same purpose: sending Internet traffic over telephone (and other
@@ -2677,6 +2726,7 @@
        select CRYPTO
        select CRYPTO_SHA1
        select CRYPTO_ARC4
+       select CRYPTO_ECB
        ---help---
          Support for the MPPE Encryption protocol, as employed by the
 	 Microsoft Point-to-Point Tunneling Protocol.
@@ -2739,6 +2789,7 @@
 config SLIP_COMPRESSED
 	bool "CSLIP compressed headers"
 	depends on SLIP
+	select SLHC
 	---help---
 	  This protocol is faster than SLIP because it uses compression on the
 	  TCP/IP headers (not on the data itself), but it has to be supported
@@ -2751,6 +2802,12 @@
 	  <http://www.tldp.org/docs.html#howto>, explains how to configure
 	  CSLIP. This won't enlarge your kernel.
 
+config SLHC
+	tristate
+	help
+	  This option enables Van Jacobsen serial line header compression
+	  routines.
+
 config SLIP_SMART
 	bool "Keepalive and linefill"
 	depends on SLIP
@@ -2785,7 +2842,7 @@
 	  "SCSI generic support".
 
 config SHAPER
-	tristate "Traffic Shaper (EXPERIMENTAL)"
+	tristate "Traffic Shaper (OBSOLETE)"
 	depends on EXPERIMENTAL
 	---help---
 	  The traffic shaper is a virtual network device that allows you to
@@ -2794,9 +2851,9 @@
 	  these virtual devices. See
 	  <file:Documentation/networking/shaper.txt> for more information.
 
-	  An alternative to this traffic shaper is the experimental
-	  Class-Based Queuing (CBQ) scheduling support which you get if you
-	  say Y to "QoS and/or fair queuing" above.
+	  An alternative to this traffic shaper are traffic schedulers which
+	  you'll get if you say Y to "QoS and/or fair queuing" in
+	  "Networking options".
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called shaper.  If unsure, say N.
@@ -2808,6 +2865,8 @@
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
+endif #NETDEVICES
+
 config NETPOLL
 	def_bool NETCONSOLE
 



