[Gc-linux-cvs] linux/drivers/net Kconfig, 1.21, 1.22 Makefile, 1.18, 1.19

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Update of /cvsroot/gc-linux/linux/drivers/net
In directory sc8-pr-cvs2.sourceforge.net:/tmp/cvs-serv26340/drivers/net

Modified Files:
	Kconfig Makefile 
Log Message:
Merged 2.6.18.


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/net/Makefile,v
retrieving revision 1.18
retrieving revision 1.19
diff -u -d -r1.18 -r1.19

--- Makefile	21 Jun 2006 18:56:06 -0000	1.18
+++ Makefile	17 Feb 2007 23:43:41 -0000	1.19
@@ -18,6 +18,9 @@
 		gianfar_mii.o \
 		gianfar_sysfs.o
 
+obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
+ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o
+
 #
 # link order important here
 #
@@ -187,12 +190,15 @@
 obj-$(CONFIG_MACMACE) += macmace.o
 obj-$(CONFIG_MAC89x0) += mac89x0.o
 obj-$(CONFIG_TUN) += tun.o
+obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_R8169) += r8169.o
 obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
 obj-$(CONFIG_IBMVETH) += ibmveth.o
 obj-$(CONFIG_S2IO) += s2io.o
+obj-$(CONFIG_MYRI10GE) += myri10ge/
 obj-$(CONFIG_SMC91X) += smc91x.o
+obj-$(CONFIG_SMC911X) += smc911x.o
 obj-$(CONFIG_DM9000) += dm9000.o
 obj-$(CONFIG_FEC_8XX) += fec_8xx/
 obj-$(CONFIG_GAMECUBE_BBA) += gcn-bba.o

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/net/Kconfig,v
retrieving revision 1.21
retrieving revision 1.22
diff -u -d -r1.21 -r1.22
--- Kconfig	21 Jun 2006 18:56:06 -0000	1.21
+++ Kconfig	17 Feb 2007 23:43:41 -0000	1.22
@@ -456,6 +456,7 @@
 config MIPS_AU1X00_ENET
 	bool "MIPS AU1000 Ethernet support"
 	depends on NET_ETHERNET && SOC_AU1X00
+	select PHYLIB
 	select CRC32
 	help
 	  If you have an Alchemy Semi AU1X00 based system
@@ -862,6 +863,17 @@
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called smc9194.
 
+config NET_NETX
+	tristate "NetX Ethernet support"
+	select MII
+	depends on NET_ETHERNET && ARCH_NETX
+	help
+	  This is support for the Hilscher netX builtin Ethernet ports
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called netx-eth.
+
 config DM9000
 	tristate "DM9000 support"
 	depends on (ARM || MIPS) && NET_ETHERNET
@@ -874,6 +886,22 @@
 	  <file:Documentation/networking/net-modules.txt>.  The module will be
 	  called dm9000.
 
+config SMC911X
+	tristate "SMSC LAN911[5678] support"
+	select CRC32
+	select MII
+	depends on NET_ETHERNET && ARCH_PXA
+	help
+	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
+	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
+	  Say Y if you want it compiled into the kernel, 
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>.
+
+	  This driver is also available as a module. The module will be 
+	  called smc911x.  If you want to compile it as a module, say M 
+	  here and read <file:Documentation/modules.txt>
+
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI cards"
 	depends on NET_ETHERNET && ISA
@@ -1368,8 +1396,8 @@
 	  called apricot.
 
 config B44
-	tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
+	tristate "Broadcom 4400 ethernet support"
+	depends on NET_PCI && PCI
 	select MII
 	help
 	  If you have a network (Ethernet) controller of this type, say Y and
@@ -1705,6 +1733,20 @@
 
 	  If unsure, say Y.
 
+config VIA_RHINE_NAPI
+	bool "Use Rx Polling (NAPI)"
+	depends on VIA_RHINE
+	help
+	  NAPI is a new driver API designed to reduce CPU and interrupt load
+	  when the driver is receiving lots of packets from the card.
+
+	  If your estimated Rx load is 10kpps or more, or if the card will be
+	  deployed on potentially unfriendly networks (e.g. in a firewall),
+	  then say Y here.
+
+	  See <file:Documentation/networking/NAPI_HOWTO.txt> for more
+	  information.
+
 config LAN_SAA9730
 	bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)"
 	depends on NET_PCI && EXPERIMENTAL && MIPS
@@ -2172,6 +2214,8 @@
 config BNX2
 	tristate "Broadcom NetXtremeII support"
 	depends on PCI
+	select CRC32
+	select ZLIB_INFLATE
 	help
 	  This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
 
@@ -2180,7 +2224,7 @@
 
 config SPIDER_NET
 	tristate "Spider Gigabit Ethernet driver"
-	depends on PCI && PPC_CELL
+	depends on PCI && PPC_IBM_CELL_BLADE
 	select FW_LOADER
 	help
 	  This driver supports the Gigabit Ethernet chips present on the
@@ -2188,16 +2232,43 @@
 
 config GIANFAR
 	tristate "Gianfar Ethernet"
-	depends on 85xx || 83xx
+	depends on 85xx || 83xx || PPC_86xx
 	select PHYLIB
 	help
-	  This driver supports the Gigabit TSEC on the MPC85xx 
-	  family of chips, and the FEC on the 8540
+	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
+	  and MPC86xx family of chips, and the FEC on the 8540.
 
 config GFAR_NAPI
 	bool "NAPI Support"
 	depends on GIANFAR
 
+config UCC_GETH
+	tristate "Freescale QE UCC GETH"
+	depends on QUICC_ENGINE && UCC_FAST
+	help
+	  This driver supports the Gigabit Ethernet mode of QE UCC.
+	  QE can be found on MPC836x CPUs.
+
+config UGETH_NAPI
+	bool "NAPI Support"
+	depends on UCC_GETH
+
+config UGETH_MAGIC_PACKET
+	bool "Magic Packet detection support"
+	depends on UCC_GETH
+
+config UGETH_FILTERING
+	bool "Mac address filtering support"
+	depends on UCC_GETH
+
+config UGETH_TX_ON_DEMOND
+	bool "Transmit on Demond support"
+	depends on UCC_GETH
+
+config UGETH_HAS_GIGA
+	bool
+	depends on UCC_GETH && MPC836x
+
 config MV643XX_ETH
 	tristate "MV-643XX Ethernet support"
 	depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM
@@ -2320,6 +2391,23 @@
 
 	  If in doubt, say N.
 
+config MYRI10GE
+	tristate "Myricom Myri-10G Ethernet support"
+	depends on PCI
+	select FW_LOADER
+	select CRC32
+	---help---
+	  This driver supports Myricom Myri-10G Dual Protocol interface in
+	  Ethernet mode. If the eeprom on your board is not recent enough,
+	  you will need a newer firmware image.
+	  You may get this image or more information, at:
+
+	  <http://www.myri.com/scs/download-Myri10GE.html>
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module
+	  will be called myri10ge.
+
 endmenu
 
 source "drivers/net/tokenring/Kconfig"



