Menu
▾
▴
[Gc-linux-cvs] linux/drivers/video Kconfig,1.15,1.16 Makefile,1.16,1.17 gcnfb.c,1.10,1.11 gcngx.c,1.6,1.7
|
From: Albert H. <he...@us...> - 2006-01-18 23:42:14
|
Update of /cvsroot/gc-linux/linux/drivers/video In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv10066/drivers/video Modified Files: Kconfig Makefile gcnfb.c gcngx.c Log Message: Linux 2.6.15. Index: gcnfb.c =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/video/gcnfb.c,v retrieving revision 1.10 retrieving revision 1.11 diff -u -d -r1.10 -r1.11 --- gcnfb.c 2 Oct 2005 18:10:00 -0000 1.10 +++ gcnfb.c 18 Jan 2006 23:41:53 -0000 1.11 @@ -568,7 +568,9 @@ .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, +#ifdef CONFIG_FB_SOFT_CURSOR .fb_cursor = soft_cursor, +#endif }; /** Index: gcngx.c =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/video/gcngx.c,v retrieving revision 1.6 retrieving revision 1.7 diff -u -d -r1.6 -r1.7 --- gcngx.c 7 Nov 2005 19:58:12 -0000 1.6 +++ gcngx.c 18 Jan 2006 23:41:53 -0000 1.7 @@ -25,6 +25,7 @@ #include <linux/wait.h> #include <asm/pgtable.h> #include <asm/atomic.h> +#include <asm/cacheflush.h> #include <platforms/gamecube.h> #include "gcngx.h" Index: Makefile =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/video/Makefile,v retrieving revision 1.16 retrieving revision 1.17 diff -u -d -r1.16 -r1.17 --- Makefile 31 Oct 2005 00:31:02 -0000 1.16 +++ Makefile 18 Jan 2006 23:41:53 -0000 1.17 @@ -16,7 +16,6 @@ obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o -obj-$(CONFIG_FB_SOFT_CURSOR) += softcursor.o obj-$(CONFIG_FB_MACMODES) += macmodes.o # Hardware specific drivers go first @@ -86,7 +85,7 @@ obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o obj-$(CONFIG_FB_PXA) += pxafb.o obj-$(CONFIG_FB_W100) += w100fb.o -obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o +obj-$(CONFIG_FB_AU1100) += au1100fb.o obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o Index: Kconfig =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/video/Kconfig,v retrieving revision 1.15 retrieving revision 1.16 diff -u -d -r1.15 -r1.16 --- Kconfig 31 Oct 2005 00:31:02 -0000 1.15 +++ Kconfig 18 Jan 2006 23:41:53 -0000 1.16 @@ -65,15 +65,6 @@ blitting. This is used by drivers that don't provide their own (accelerated) version. -config FB_SOFT_CURSOR - tristate - depends on FB - default n - ---help--- - Include the soft_cursor function for generic software cursor support. - This is used by drivers that don't provide their own (accelerated) - version. - config FB_MACMODES tristate depends on FB @@ -114,7 +105,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -133,7 +123,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -152,7 +141,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -169,7 +157,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -181,7 +168,9 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR + help + Say Y to enable the Framebuffer driver for the CLPS7111 and + EP7212 processors. config FB_SA1100 bool "SA-1100 LCD support" @@ -189,7 +178,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer @@ -204,7 +192,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" @@ -212,7 +199,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -225,7 +211,6 @@ default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_Q40 bool @@ -234,12 +219,10 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_AMIGA tristate "Amiga native chipset support" depends on FB && AMIGA - select FB_SOFT_CURSOR help This is the frame buffer device driver for the builtin graphics chipset found in Amigas. @@ -279,7 +262,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -294,7 +276,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -317,7 +298,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -328,7 +308,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix @@ -351,7 +330,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics @@ -363,7 +341,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the @@ -375,7 +352,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics @@ -387,7 +363,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the "valkyrie" graphics @@ -399,42 +374,32 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. config FB_ASILIANT - bool "Chips 69000 display support" + bool "Asiliant (Chips) 69000 display support" depends on (FB = y) && PCI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_IMSTT bool "IMS Twin Turbo display support" depends on (FB = y) && PCI select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. -config FB_S3TRIO - bool "S3 Trio display support" - depends on (FB = y) && PPC && BROKEN - help - If you have a S3 Trio say Y. Say N for S3 Virge. - config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -448,7 +413,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -469,7 +433,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES # bool ' Apple DAFB display support' CONFIG_FB_DAFB @@ -478,7 +441,6 @@ depends on (FB = y) && HP300 select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR default y config FB_TGA @@ -487,18 +449,16 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. config FB_VESA bool "VESA VGA graphics support" - depends on (FB = y) && (X86 || X86_64) + depends on (FB = y) && X86 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -516,7 +476,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you have a Hercules mono graphics card. @@ -545,7 +504,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help SGI Visual Workstation support for framebuffer graphics. @@ -555,7 +513,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -577,31 +534,35 @@ bool "Sun3 framebuffer support" depends on (FB = y) && (SUN3 || SUN3X) && BROKEN +config FB_SBUS + bool "SBUS and UPA framebuffers" + depends on (FB = y) && SPARC + help + Say Y if you want support for SBUS or UPA based frame buffer device. + config FB_BW2 bool "BWtwo support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the BWtwo frame buffer. config FB_CG3 bool "CGthree support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGthree frame buffer. config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -612,7 +573,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -634,13 +594,23 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a framebuffer. Product specs at <http://www.erd.epson.com/vdc/html/products.htm>. +config FB_S1D13XXX + tristate "Epson S1D13XXX framebuffer support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Support for S1D13XXX framebuffer device family (currently only + working with S1D13806). Product specs at + <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> + config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI @@ -650,7 +620,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -662,7 +631,7 @@ config FB_NVIDIA_I2C bool "Enable DDC Support" - depends on FB_NVIDIA && !PPC_OF + depends on FB_NVIDIA help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -712,7 +681,7 @@ config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64 + depends on FB && EXPERIMENTAL && PCI && X86_32 select AGP select AGP_INTEL select FB_MODE_HELPERS @@ -761,14 +730,13 @@ config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64 + depends on FB && EXPERIMENTAL && PCI && X86_32 select AGP select AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports the on-board graphics built in to the Intel 830M/845G/852GM/855GM/865G chipsets. @@ -791,7 +759,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_TILEBLITTING select FB_MACMODES if PPC_PMAC ---help--- @@ -932,7 +899,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help Choose this option if you want to use an ATI Radeon graphics card as @@ -950,7 +916,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC_OF help Choose this option if you want to use an ATI Radeon graphics card as @@ -988,7 +953,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. @@ -1004,7 +968,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. @@ -1047,6 +1010,12 @@ is at <http://support.ati.com/products/pc/mach64/graphics_xpression.html>. +config FB_S3TRIO + bool "S3 Trio display support" + depends on (FB = y) && PPC && BROKEN + help + If you have a S3 Trio say Y. Say N for S3 Virge. + config FB_SAVAGE tristate "S3 Savage support" depends on FB && PCI && EXPERIMENTAL @@ -1056,7 +1025,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1093,7 +1061,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the SiS 300, 315, 330 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. @@ -1123,7 +1090,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1137,7 +1103,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -1151,7 +1116,6 @@ select FB_CFB_IMAGEBLIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA - select FB_SOFT_CURSOR help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -1173,7 +1137,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. @@ -1190,7 +1153,6 @@ tristate "Cyberblade/i1 support" depends on FB && PCI select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select VIDEO_SELECT ---help--- This driver is supposed to support the Trident Cyberblade/i1 @@ -1218,7 +1180,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -1256,60 +1217,20 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Nintendo GameCube. -config FB_E1356 - tristate "Epson SED1356 framebuffer support" - depends on FB && EXPERIMENTAL && PCI && MIPS - -config PB1000_CRT - bool "Use CRT on Pb1000 (J65)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1000_NTSC - bool "Use Compsite NTSC on Pb1000 (J63)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1000_TFT - bool "Use TFT Panel on Pb1000 (J64)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1500_CRT - bool "Use CRT on Pb1500 " if MIPS_PB1500=y - depends on FB_E1356 - -config PB1500_CRT - prompt "Use CRT on Pb1100 " - depends on FB_E1356 && MIPS_PB1100=y - -config PB1500_TFT - bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y - depends on FB_E1356 - -config PB1500_TFT - prompt "Use TFT Panel on Pb1100 " - depends on FB_E1356 && MIPS_PB1100=y - config FB_AU1100 bool "Au1100 LCD Driver" depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y source "drivers/video/geode/Kconfig" -config FB_SBUS - bool "SBUS and UPA framebuffers" - depends on (FB = y) && (SPARC32 || SPARC64) - help - Say Y if you want support for SBUS or UPA based frame buffer device. - config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -1320,7 +1241,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -1331,7 +1251,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -1342,7 +1261,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -1353,14 +1271,13 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. config FB_PCI bool "PCI framebuffers" - depends on (FB = y) && PCI && (SPARC64 || SPARC32) + depends on (FB = y) && PCI && SPARC config FB_IGA bool "IGA 168x display support" @@ -1368,7 +1285,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1379,40 +1295,36 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. config FB_PMAG_AA bool "PMAG-AA TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) used mainly in the MIPS-based DECstation series. config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) used mainly in the MIPS-based DECstation series. config FB_PMAGB_B bool "PMAGB-B TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAGB-B TURBOchannel framebuffer card used mainly in the MIPS-based DECstation series. The card is currently only @@ -1420,11 +1332,10 @@ config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && MACH_DECSTATION select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the onboard framebuffer (1024x768x8) in the Personal DECstation series (Personal DECstation 5000/20, /25, /33, /50, @@ -1436,7 +1347,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. @@ -1449,7 +1359,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help The G364 driver is the framebuffer used in MIPS Magnum 4000 and Olivetti M700-10 systems. @@ -1460,7 +1369,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1471,7 +1379,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1483,23 +1390,6 @@ If unsure, say N. -config FB_W100 - tristate "W100 frame buffer support" - depends on FB && PXA_SHARPSL - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR - ---help--- - Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. - - This driver is also available as a module ( = code which can be - inserted and removed from the running kernel whenever you want). The - module will be called vfb. If you want to compile it as a module, - say M here and read <file:Documentation/modules.txt>. - - If unsure, say N. - config FB_PXA_PARAMETERS bool "PXA LCD command line parameters" default n @@ -1517,17 +1407,21 @@ <file:Documentation/fb/pxafb.txt> describes the available parameters. -config FB_S1D13XXX - tristate "Epson S1D13XXX framebuffer support" - depends on FB - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR - help - Support for S1D13XXX framebuffer device family (currently only - working with S1D13806). Product specs at - <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> +config FB_W100 + tristate "W100 frame buffer support" + depends on FB && PXA_SHARPSL + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called vfb. If you want to compile it as a module, + say M here and read <file:Documentation/modules.txt>. + + If unsure, say N. config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" @@ -1535,7 +1429,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Frame buffer driver for the built-in LCD controller in the Samsung S3C2410 processor. @@ -1559,7 +1452,6 @@ select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics |
