[Gc-linux-cvs] linux/drivers/rtc Kconfig,1.3,1.4 Makefile,1.3,1.4

[Albert H. <he...@us...>]

Update of /cvsroot/gc-linux/linux/drivers/rtc
In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv22863/drivers/rtc

Modified Files:
	Kconfig Makefile 
Log Message:
- merge 2.6.27
- add gcnvi_udbg driver
- add starlet-gpio driver
- add initial SDHC support to rvl-stsd driver
- add support for MEM1+MEM2 as normal RAM
- enhanced rvl-sthcd device detection


Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/rtc/Makefile,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- Makefile	14 Sep 2008 19:20:30 -0000	1.3
+++ Makefile	15 Nov 2008 20:10:15 -0000	1.4
@@ -24,6 +24,7 @@
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
 obj-$(CONFIG_RTC_DRV_DS1216)	+= rtc-ds1216.o
 obj-$(CONFIG_RTC_DRV_DS1302)	+= rtc-ds1302.o
+obj-$(CONFIG_RTC_DRV_DS1305)	+= rtc-ds1305.o
 obj-$(CONFIG_RTC_DRV_DS1307)	+= rtc-ds1307.o
 obj-$(CONFIG_RTC_DRV_DS1374)	+= rtc-ds1374.o
 obj-$(CONFIG_RTC_DRV_DS1511)	+= rtc-ds1511.o
@@ -35,6 +36,7 @@
 obj-$(CONFIG_RTC_DRV_GCN)	+= rtc-gcn.o
 obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
 obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
+obj-$(CONFIG_RTC_DRV_M41T94)	+= rtc-m41t94.o
 obj-$(CONFIG_RTC_DRV_M48T59)	+= rtc-m48t59.o
 obj-$(CONFIG_RTC_DRV_M48T86)	+= rtc-m48t86.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
@@ -42,6 +44,7 @@
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PCF8563)	+= rtc-pcf8563.o
 obj-$(CONFIG_RTC_DRV_PCF8583)	+= rtc-pcf8583.o
+obj-$(CONFIG_RTC_DRV_PL030)	+= rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
 obj-$(CONFIG_RTC_DRV_PPC)	+= rtc-ppc.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/rtc/Kconfig,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- Kconfig	14 Sep 2008 19:20:29 -0000	1.3
+++ Kconfig	15 Nov 2008 20:10:15 -0000	1.4
@@ -273,6 +273,25 @@
 
 if SPI_MASTER
 
+config RTC_DRV_M41T94
+	tristate "ST M41T94"
+	help
+	  If you say yes here you will get support for the
+	  ST M41T94 SPI RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-m41t94.
+
+config RTC_DRV_DS1305
+	tristate "Dallas/Maxim DS1305/DS1306"
+	help
+	  Select this driver to get support for the Dallas/Maxim DS1305
+	  and DS1306 real time clock chips.  These support a trickle
+	  charger, alarms, and NVRAM in addition to the clock.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ds1305.
+
 config RTC_DRV_MAX6902
 	tristate "Maxim MAX6902"
 	help
@@ -479,6 +498,16 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called rtc-vr41xx.
 
+config RTC_DRV_PL030
+	tristate "ARM AMBA PL030 RTC"
+	depends on ARM_AMBA
+	help
+	  If you say Y here you will get access to ARM AMBA
+	  PrimeCell PL030 RTC found on certain ARM SOCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-pl030.
+
 config RTC_DRV_PL031
 	tristate "ARM AMBA PL031 RTC"
 	depends on ARM_AMBA
@@ -505,12 +534,13 @@
 	  this is powered by the backup power supply.
 
 config RTC_DRV_AT91SAM9
-	tristate "AT91SAM9x"
+	tristate "AT91SAM9x/AT91CAP9"
 	depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
 	help
-	  RTC driver for the Atmel AT91SAM9x internal RTT (Real Time Timer).
-	  These timers are powered by the backup power supply (such as a
-	  small coin cell battery), but do not need to be used as RTCs.
+	  RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
+	  (Real Time Timer). These timers are powered by the backup power
+	  supply (such as a small coin cell battery), but do not need to
+	  be used as RTCs.
 
 	  (On AT91SAM9rl chips you probably want to use the dedicated RTC
 	  module and leave the RTT available for other uses.)
@@ -541,7 +571,7 @@
 
 config RTC_DRV_BFIN
 	tristate "Blackfin On-Chip RTC"
-	depends on BLACKFIN
+	depends on BLACKFIN && !BF561
 	help
 	  If you say yes here you will get support for the
 	  Blackfin On-Chip Real Time Clock.