Menu
▾
▴
[Gc-linux-cvs] linux/fs Kconfig,1.10,1.11 Makefile,1.9,1.10
|
From: Albert H. <he...@us...> - 2008-09-13 19:42:52
|
Update of /cvsroot/gc-linux/linux/fs In directory sc8-pr-cvs2.sourceforge.net:/tmp/cvs-serv13650/fs Modified Files: Kconfig Makefile Log Message: Merged 2.6.25. Queued small fixes for: - starlet-es - starlet-ipc - starlet-stm - rvl-stsd - rvl-sthcd - gcn-ai Index: Makefile =================================================================== RCS file: /cvsroot/gc-linux/linux/fs/Makefile,v retrieving revision 1.9 retrieving revision 1.10 diff -u -d -r1.9 -r1.10 --- Makefile 24 Feb 2008 18:05:34 -0000 1.9 +++ Makefile 13 Sep 2008 19:42:57 -0000 1.10 @@ -39,6 +39,7 @@ obj-y += binfmt_script.o obj-$(CONFIG_BINFMT_ELF) += binfmt_elf.o +obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o obj-$(CONFIG_BINFMT_ELF_FDPIC) += binfmt_elf_fdpic.o obj-$(CONFIG_BINFMT_SOM) += binfmt_som.o obj-$(CONFIG_BINFMT_FLAT) += binfmt_flat.o Index: Kconfig =================================================================== RCS file: /cvsroot/gc-linux/linux/fs/Kconfig,v retrieving revision 1.10 retrieving revision 1.11 diff -u -d -r1.10 -r1.11 --- Kconfig 24 Feb 2008 18:05:34 -0000 1.10 +++ Kconfig 13 Sep 2008 19:42:57 -0000 1.11 @@ -236,6 +236,7 @@ config JBD2 tristate + select CRC32 help This is a generic journaling layer for block devices that support both 32-bit and 64-bit block numbers. It is currently used by @@ -440,14 +441,8 @@ Tools web page: http://oss.oracle.com/projects/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ - Note: Features which OCFS2 does not support yet: - - extended attributes - - quotas - - cluster aware flock - - Directory change notification (F_NOTIFY) - - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease) - - POSIX ACLs - - readpages / writepages (not user visible) + For more information on OCFS2, see the file + <file:Documentation/filesystems/ocfs2.txt>. config OCFS2_DEBUG_MASKLOG bool "OCFS2 logging support" @@ -468,40 +463,18 @@ this option for debugging only as it is likely to decrease performance of the filesystem. -config MINIX_FS - tristate "Minix fs support" - help - Minix is a simple operating system used in many classes about OS's. - The minix file system (method to organize files on a hard disk - partition or a floppy disk) was the original file system for Linux, - but has been superseded by the second extended file system ext2fs. - You don't want to use the minix file system on your hard disk - because of certain built-in restrictions, but it is sometimes found - on older Linux floppy disks. This option will enlarge your kernel - by about 28 KB. If unsure, say N. - - To compile this file system support as a module, choose M here: the - module will be called minix. Note that the file system of your root - partition (the one containing the directory /) cannot be compiled as - a module. - -config ROMFS_FS - tristate "ROM file system support" - ---help--- - This is a very small read-only file system mainly intended for - initial ram disks of installation disks, but it could be used for - other read-only media as well. Read - <file:Documentation/filesystems/romfs.txt> for details. - - To compile this file system support as a module, choose M here: the - module will be called romfs. Note that the file system of your - root partition (the one containing the directory /) cannot be a - module. +endif # BLOCK - If you don't know whether you need it, then you don't need it: - answer N. +config DNOTIFY + bool "Dnotify support" + default y + help + Dnotify is a directory-based per-fd file change notification system + that uses signals to communicate events to user-space. There exist + superior alternatives, but some applications may still rely on + dnotify. -endif + If unsure, say Y. config INOTIFY bool "Inotify file change notification support" @@ -582,17 +555,6 @@ depends on XFS_QUOTA || QUOTA default y -config DNOTIFY - bool "Dnotify support" - default y - help - Dnotify is a directory-based per-fd file change notification system - that uses signals to communicate events to user-space. There exist - superior alternatives, but some applications may still rely on - dnotify. - - If unsure, say Y. - config AUTOFS_FS tristate "Kernel automounter support" help @@ -729,7 +691,7 @@ If unsure, say N. endmenu -endif +endif # BLOCK if BLOCK menu "DOS/FAT/NT Filesystems" @@ -912,7 +874,7 @@ It is perfectly safe to say N here. endmenu -endif +endif # BLOCK menu "Pseudo filesystems" @@ -1039,8 +1001,8 @@ def_bool HUGETLBFS config CONFIGFS_FS - tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)" - depends on SYSFS && EXPERIMENTAL + tristate "Userspace-driven configuration filesystem" + depends on SYSFS help configfs is a ram-based filesystem that provides the converse of sysfs's functionality. Where sysfs is a filesystem-based @@ -1168,7 +1130,7 @@ depends on BEFS_FS help If you say Y here, you can use the 'debug' mount option to enable - debugging output from the driver. + debugging output from the driver. config BFS_FS tristate "BFS file system support (EXPERIMENTAL)" @@ -1279,7 +1241,7 @@ Extended attributes are name:value pairs associated with inodes by the kernel or by users (see the attr(5) manual page, or visit <http://acl.bestbits.at/> for details). - + If unsure, say N. config JFFS2_FS_POSIX_ACL @@ -1290,10 +1252,10 @@ help Posix Access Control Lists (ACLs) support permissions for users and groups beyond the owner/group/world scheme. - + To learn more about Access Control Lists, visit the Posix ACLs for Linux website <http://acl.bestbits.at/>. - + If you don't know what Access Control Lists are, say N config JFFS2_FS_SECURITY @@ -1305,7 +1267,7 @@ implemented by security modules like SELinux. This option enables an extended attribute handler for file security labels in the jffs2 filesystem. - + If you are not using a security module that requires using extended attributes for file security labels, say N. @@ -1433,6 +1395,24 @@ To compile this as a module, choose M here: the module will be called freevxfs. If unsure, say N. +config MINIX_FS + tristate "Minix file system support" + depends on BLOCK + help + Minix is a simple operating system used in many classes about OS's. + The minix file system (method to organize files on a hard disk + partition or a floppy disk) was the original file system for Linux, + but has been superseded by the second extended file system ext2fs. + You don't want to use the minix file system on your hard disk + because of certain built-in restrictions, but it is sometimes found + on older Linux floppy disks. This option will enlarge your kernel + by about 28 KB. If unsure, say N. + + To compile this file system support as a module, choose M here: the + module will be called minix. Note that the file system of your root + partition (the one containing the directory /) cannot be compiled as + a module. + config HPFS_FS tristate "OS/2 HPFS file system support" @@ -1450,7 +1430,6 @@ module will be called hpfs. If unsure, say N. - config QNX4FS_FS tristate "QNX4 file system support (read only)" depends on BLOCK @@ -1477,6 +1456,22 @@ It's currently broken, so for now: answer N. +config ROMFS_FS + tristate "ROM file system support" + depends on BLOCK + ---help--- + This is a very small read-only file system mainly intended for + initial ram disks of installation disks, but it could be used for + other read-only media as well. Read + <file:Documentation/filesystems/romfs.txt> for details. + + To compile this file system support as a module, choose M here: the + module will be called romfs. Note that the file system of your + root partition (the one containing the directory /) cannot be a + module. + + If you don't know whether you need it, then you don't need it: + answer N. config SYSV_FS @@ -1517,7 +1512,6 @@ If you haven't heard about all of this before, it's safe to say N. - config UFS_FS tristate "UFS file system support (read only)" depends on BLOCK @@ -1690,6 +1684,8 @@ select CRYPTO_MD5 if NFSD_V4 select CRYPTO if NFSD_V4 select FS_POSIX_ACL if NFSD_V4 + select PROC_FS if NFSD_V4 + select PROC_FS if SUNRPC_GSS help If you want your Linux box to act as an NFS *server*, so that other computers on your local network which support NFS can access certain @@ -1759,10 +1755,10 @@ If you want your Linux box to mount its whole root file system (the one containing the directory /) from some other computer over the net via NFS (presumably because your box doesn't have a hard disk), - say Y. Read <file:Documentation/nfsroot.txt> for details. It is - likely that in this case, you also want to say Y to "Kernel level IP - autoconfiguration" so that your box can discover its network address - at boot time. + say Y. Read <file:Documentation/filesystems/nfsroot.txt> for + details. It is likely that in this case, you also want to say Y to + "Kernel level IP autoconfiguration" so that your box can discover + its network address at boot time. Most people say N here. @@ -1793,12 +1789,9 @@ tristate config SUNRPC_XPRT_RDMA - tristate "RDMA transport for sunrpc (EXPERIMENTAL)" + tristate depends on SUNRPC && INFINIBAND && EXPERIMENTAL - default m - help - Adds a client RPC transport for supporting kernel NFS over RDMA - mounts, including Infiniband and iWARP. Experimental. + default SUNRPC && INFINIBAND config SUNRPC_BIND34 bool "Support for rpcbind versions 3 & 4 (EXPERIMENTAL)" @@ -1849,7 +1842,7 @@ If unsure, say N. config SMB_FS - tristate "SMB file system support (to mount Windows shares etc.)" + tristate "SMB file system support (OBSOLETE, please use CIFS)" depends on INET select NLS help @@ -1872,8 +1865,8 @@ General information about how to connect Linux, Windows machines and Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. - To compile the SMB support as a module, choose M here: the module will - be called smbfs. Most people say N, however. + To compile the SMB support as a module, choose M here: + the module will be called smbfs. Most people say N, however. config SMB_NLS_DEFAULT bool "Use a default NLS" @@ -1905,7 +1898,7 @@ smbmount from samba 2.2.0 or later supports this. config CIFS - tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)" + tristate "CIFS support (advanced network filesystem, SMBFS successor)" depends on INET select NLS help @@ -1916,13 +1909,15 @@ file servers such as Windows 2000 (including Windows 2003, NT 4 and Windows XP) as well by Samba (which provides excellent CIFS server support for Linux and many other operating systems). Limited - support for OS/2 and Windows ME and similar servers is provided as well. + support for OS/2 and Windows ME and similar servers is provided as + well. - The intent of the cifs module is to provide an advanced - network file system client for mounting to CIFS compliant servers, - including support for dfs (hierarchical name space), secure per-user - session establishment, safe distributed caching (oplock), optional - packet signing, Unicode and other internationalization improvements. + The cifs module provides an advanced network file system + client for mounting to CIFS compliant servers. It includes + support for DFS (hierarchical name space), secure per-user + session establishment via Kerberos or NTLM or NTLMv2, + safe distributed caching (oplock), optional packet + signing, Unicode and other internationalization improvements. If you need to mount to Samba or Windows from this machine, say Y. config CIFS_STATS @@ -1954,22 +1949,23 @@ (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos) security mechanisms. These hash the password more securely than the mechanisms used in the older LANMAN version of the - SMB protocol needed to establish sessions with old SMB servers. + SMB protocol but LANMAN based authentication is needed to + establish sessions with some old SMB servers. Enabling this option allows the cifs module to mount to older LANMAN based servers such as OS/2 and Windows 95, but such mounts may be less secure than mounts using NTLM or more recent security mechanisms if you are on a public network. Unless you - have a need to access old SMB servers (and are on a private + have a need to access old SMB servers (and are on a private network) you probably want to say N. Even if this support - is enabled in the kernel build, they will not be used - automatically. At runtime LANMAN mounts are disabled but + is enabled in the kernel build, LANMAN authentication will not be + used automatically. At runtime LANMAN mounts are disabled but can be set to required (or optional) either in /proc/fs/cifs (see fs/cifs/README for more detail) or via an - option on the mount command. This support is disabled by + option on the mount command. This support is disabled by default in order to reduce the possibility of a downgrade attack. - + If unsure, say N. config CIFS_XATTR @@ -2010,7 +2006,7 @@ messages in some error paths, slowing performance. This option can be turned off unless you are debugging cifs problems. If unsure, say N. - + config CIFS_EXPERIMENTAL bool "CIFS Experimental Features (EXPERIMENTAL)" depends on CIFS && EXPERIMENTAL @@ -2029,12 +2025,22 @@ depends on CIFS_EXPERIMENTAL depends on KEYS help - Enables an upcall mechanism for CIFS which will be used to contact - userspace helper utilities to provide SPNEGO packaged Kerberos - tickets which are needed to mount to certain secure servers + Enables an upcall mechanism for CIFS which accesses + userspace helper utilities to provide SPNEGO packaged (RFC 4178) + Kerberos tickets which are needed to mount to certain secure servers (for which more secure Kerberos authentication is required). If unsure, say N. +config CIFS_DFS_UPCALL + bool "DFS feature support (EXPERIMENTAL)" + depends on CIFS_EXPERIMENTAL + depends on KEYS + help + Enables an upcall mechanism for CIFS which contacts userspace + helper utilities to provide server name resolution (host names to + IP addresses) which is needed for implicit mounts of DFS junction + points. If unsure, say N. + config NCP_FS tristate "NCP file system support (to mount NetWare volumes)" depends on IPX!=n || INET @@ -2091,7 +2097,7 @@ However this new API is not backward compatible with older clients. If you really need to run the old Coda userspace cache manager then say Y. - + For most cases you probably want to say N. config AFS_FS @@ -2141,4 +2147,3 @@ source "fs/dlm/Kconfig" endmenu - |
