Menu
▾
▴
[Gc-linux-cvs] linux/drivers/net Kconfig, 1.31, 1.32 Makefile, 1.25, 1.26
|
From: Albert H. <he...@us...> - 2008-09-13 19:42:49
|
Update of /cvsroot/gc-linux/linux/drivers/net In directory sc8-pr-cvs2.sourceforge.net:/tmp/cvs-serv13650/drivers/net Modified Files: Kconfig Makefile Log Message: Merged 2.6.25. Queued small fixes for: - starlet-es - starlet-ipc - starlet-stm - rvl-stsd - rvl-sthcd - gcn-ai Index: Makefile =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/net/Makefile,v retrieving revision 1.25 retrieving revision 1.26 diff -u -d -r1.25 -r1.26 --- Makefile 24 Feb 2008 18:05:33 -0000 1.25 +++ Makefile 13 Sep 2008 19:42:56 -0000 1.26 @@ -6,12 +6,14 @@ obj-$(CONFIG_E1000E) += e1000e/ obj-$(CONFIG_IBM_EMAC) += ibm_emac/ obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ +obj-$(CONFIG_IGB) += igb/ obj-$(CONFIG_IXGBE) += ixgbe/ obj-$(CONFIG_IXGB) += ixgb/ obj-$(CONFIG_IP1000) += ipg.o obj-$(CONFIG_CHELSIO_T1) += chelsio/ obj-$(CONFIG_CHELSIO_T3) += cxgb3/ obj-$(CONFIG_EHEA) += ehea/ +obj-$(CONFIG_CAN) += can/ obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_ATL1) += atl1/ obj-$(CONFIG_GIANFAR) += gianfar_driver.o @@ -54,6 +56,7 @@ obj-$(CONFIG_EPIC100) += epic100.o obj-$(CONFIG_SIS190) += sis190.o obj-$(CONFIG_SIS900) += sis900.o +obj-$(CONFIG_R6040) += r6040.o obj-$(CONFIG_YELLOWFIN) += yellowfin.o obj-$(CONFIG_ACENIC) += acenic.o obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o @@ -63,10 +66,12 @@ obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_TIGON3) += tg3.o obj-$(CONFIG_BNX2) += bnx2.o +obj-$(CONFIG_BNX2X) += bnx2x.o spidernet-y += spider_net.o spider_net_ethtool.o obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o obj-$(CONFIG_GELIC_NET) += ps3_gelic.o -ps3_gelic-objs += ps3_gelic_net.o +gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o +ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y) obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SKY2) += sky2.o @@ -92,7 +97,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o -obj-$(CONFIG_SHAPER) += shaper.o obj-$(CONFIG_HP100) += hp100.o obj-$(CONFIG_SMC9194) += smc9194.o obj-$(CONFIG_FEC) += fec.o @@ -216,6 +220,7 @@ obj-$(CONFIG_FEC_8XX) += fec_8xx/ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o obj-$(CONFIG_MLX4_CORE) += mlx4/ +obj-$(CONFIG_ENC28J60) += enc28j60.o obj-$(CONFIG_GAMECUBE_BBA) += gcn-bba.o obj-$(CONFIG_MACB) += macb.o Index: Kconfig =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/net/Kconfig,v retrieving revision 1.31 retrieving revision 1.32 diff -u -d -r1.31 -r1.32 --- Kconfig 26 Mar 2008 20:09:05 -0000 1.31 +++ Kconfig 13 Sep 2008 19:42:56 -0000 1.32 @@ -90,6 +90,11 @@ This allows one to create virtual interfaces that map packets to or from specific MAC addresses to a particular interface. + Macvlan devices can be added using the "ip" command from the + iproute2 package starting with the iproute2-2.6.23 release: + + "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan" + To compile this driver as a module, choose M here: the module will be called macvlan. @@ -212,7 +217,7 @@ config MACB tristate "Atmel MACB support" - depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 + depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9 select PHYLIB help The Atmel MACB ethernet interface is found on many AT32 and AT91 @@ -823,8 +828,8 @@ will be called smc-ultra32. config BFIN_MAC - tristate "Blackfin 536/537 on-chip mac support" - depends on NET_ETHERNET && (BF537 || BF536) && (!BF537_PORT_H) + tristate "Blackfin 527/536/537 on-chip mac support" + depends on NET_ETHERNET && (BF527 || BF537 || BF536) && (!BF537_PORT_H) select CRC32 select MII select PHYLIB @@ -837,7 +842,7 @@ config BFIN_MAC_USE_L1 bool "Use L1 memory for rx/tx packets" - depends on BFIN_MAC && BF537 + depends on BFIN_MAC && (BF527 || BF537) default y help To get maximum network performance, you should use L1 memory as rx/tx buffers. @@ -864,7 +869,8 @@ config BFIN_MAC_RMII bool "RMII PHY Interface (EXPERIMENTAL)" depends on BFIN_MAC && EXPERIMENTAL - default n + default y if BFIN527_EZKIT + default n if BFIN537_STAMP help Use Reduced PHY MII Interface @@ -887,7 +893,8 @@ tristate "SMC 91C9x/91C1xxx support" select CRC32 select MII - depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN + depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \ + SOC_AU1X00 || BLACKFIN || MN10300 help This is a driver for SMC's 91x series of Ethernet chipsets, including the SMC91C94 and the SMC91C111. Say Y if you want it @@ -921,6 +928,31 @@ To compile this driver as a module, choose M here. The module will be called dm9000. +config ENC28J60 + tristate "ENC28J60 support" + depends on EXPERIMENTAL && SPI && NET_ETHERNET + select CRC32 + ---help--- + Support for the Microchip EN28J60 ethernet chip. + + To compile this driver as a module, choose M here. The module will be + called enc28j60. + +config ENC28J60_WRITEVERIFY + bool "Enable write verify" + depends on ENC28J60 + ---help--- + Enable the verify after the buffer write useful for debugging purpose. + If unsure, say N. + +config DM9000_DEBUGLEVEL + int "DM9000 maximum debug level" + depends on DM9000 + default 4 + help + The maximum level of debugging code compiled into the DM9000 + driver. + config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 @@ -1190,7 +1222,7 @@ config IBMLANA tristate "IBM LAN Adapter/A support" - depends on MCA && MCA_LEGACY + depends on MCA ---help--- This is a Micro Channel Ethernet adapter. You need to set CONFIG_MCA to use this driver. It is both available as an in-kernel @@ -1593,6 +1625,18 @@ experience problems, you can enable this option to restore the old RX-reset behavior. If unsure, say N. +config R6040 + tristate "RDC R6040 Fast Ethernet Adapter support (EXPERIMENTAL)" + depends on NET_PCI && PCI + select CRC32 + select MII + help + This is a driver for the R6040 Fast Ethernet MACs found in the + the RDC R-321x System-on-chips. + + To compile this driver as a module, choose M here: the module + will be called r6040. This is recommended. + config SIS900 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI @@ -1716,10 +1760,8 @@ config CPMAC tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" - depends on NET_ETHERNET && EXPERIMENTAL && AR7 + depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN select PHYLIB - select FIXED_PHY - select FIXED_MII_100_FDX help TI AR7 CPMAC Ethernet support @@ -1794,7 +1836,7 @@ config SGISEEQ tristate "SGI Seeq ethernet controller support" - depends on SGI_IP22 + depends on SGI_HAS_SEEQ help Say Y here if you have an Seeq based Ethernet network card. This is used in many Silicon Graphics machines. @@ -1988,6 +2030,9 @@ To compile this driver as a module, choose M here. The module will be called e1000e. +config E1000E_ENABLED + def_bool E1000E != n + config IP1000 tristate "IP1000 Gigabit Ethernet support" depends on PCI && EXPERIMENTAL @@ -1998,6 +2043,27 @@ To compile this driver as a module, choose M here: the module will be called ipg. This is recommended. +config IGB + tristate "Intel(R) 82575 PCI-Express Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82575 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here. The module + will be called igb. + source "drivers/net/ixp2000/Kconfig" config MYRI_SBUS @@ -2308,9 +2374,20 @@ To compile this driver as a module, choose M here: the module will be called ps3_gelic. +config GELIC_WIRELESS + bool "PS3 Wireless support" + depends on GELIC_NET + select WIRELESS_EXT + help + This option adds the support for the wireless feature of PS3. + If you have the wireless-less model of PS3 or have no plan to + use wireless feature, disabling this option saves memory. As + the driver automatically distinguishes the models, you can + safely enable this option even if you have a wireless-less model. + config GIANFAR tristate "Gianfar Ethernet" - depends on 85xx || 83xx || PPC_86xx + depends on FSL_SOC select PHYLIB select CRC32 help @@ -2451,7 +2528,7 @@ config EHEA tristate "eHEA Ethernet support" - depends on IBMEBUS && INET + depends on IBMEBUS && INET && SPARSEMEM select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. @@ -2567,8 +2644,9 @@ config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" - depends on PPC64 && PCI + depends on PPC_PASEMI && PCI select PHYLIB + select INET_LRO help This driver supports the on-chip 1/10Gbit Ethernet controller on PA Semi's PWRficient line of chips. @@ -2594,6 +2672,16 @@ help Tehuti Networks 10G Ethernet NIC +config BNX2X + tristate "Broadcom NetXtremeII 10Gb support" + depends on PCI + select ZLIB_INFLATE + help + This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. + To compile this driver as a module, choose M here: the module + will be called bnx2x. This is recommended. + + endif # NETDEV_10000 source "drivers/net/tokenring/Kconfig" @@ -3024,23 +3112,6 @@ adaptor below. You also should have said Y to "SCSI support" and "SCSI generic support". -config SHAPER - tristate "Traffic Shaper (OBSOLETE)" - depends on EXPERIMENTAL - ---help--- - The traffic shaper is a virtual network device that allows you to - limit the rate of outgoing data flow over some other network device. - The traffic that you want to slow down can then be routed through - these virtual devices. See - <file:Documentation/networking/shaper.txt> for more information. - - An alternative to this traffic shaper are traffic schedulers which - you'll get if you say Y to "QoS and/or fair queuing" in - "Networking options". - - To compile this driver as a module, choose M here: the module - will be called shaper. If unsure, say N. - config NETCONSOLE tristate "Network console logging support (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -3073,6 +3144,7 @@ tristate "Virtio network driver (EXPERIMENTAL)" depends on EXPERIMENTAL && VIRTIO ---help--- - This is the virtual network driver for lguest. Say Y or M. + This is the virtual network driver for virtio. It can be used with + lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. endif # NETDEVICES |
