gc-linux-cvs

[Albert H. <he...@us...>]

Update of /cvsroot/gc-linux/linux/drivers/serial
In directory sc8-pr-cvs2.sourceforge.net:/tmp/cvs-serv13650/drivers/serial

Modified Files:
	Kconfig Makefile 
Log Message:
Merged 2.6.25.
Queued small fixes for: 
- starlet-es
- starlet-ipc
- starlet-stm
- rvl-stsd
- rvl-sthcd
- gcn-ai



Index: Makefile
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/serial/Makefile,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -d -r1.1 -r1.2
--- Makefile	24 Feb 2008 18:08:15 -0000	1.1
+++ Makefile	13 Sep 2008 19:42:56 -0000	1.2
@@ -39,6 +39,7 @@
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_68360) += 68360serial.o
 obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
+obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_V850E_UART) += v850e_uart.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
@@ -54,6 +55,7 @@
 obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
 obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
 obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
+obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
@@ -64,4 +66,5 @@
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
 obj-$(CONFIG_SERIAL_USBGECKO) += usbgecko.o

Index: Kconfig
===================================================================
RCS file: /cvsroot/gc-linux/linux/drivers/serial/Kconfig,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -d -r1.2 -r1.3
--- Kconfig	26 Mar 2008 20:15:21 -0000	1.2
+++ Kconfig	13 Sep 2008 19:42:56 -0000	1.3
@@ -380,6 +380,21 @@
 	  console is the device which receives all kernel messages and
 	  warnings and which allows logins in single user mode).
 
+config SERIAL_ATMEL_PDC
+	bool "Support DMA transfers on AT91 / AT32 serial port"
+	depends on SERIAL_ATMEL
+	default y
+	help
+	  Say Y here if you wish to use the PDC to do DMA transfers to
+	  and from the Atmel AT91 / AT32 serial port. In order to
+	  actually use DMA transfers, make sure that the use_dma_tx
+	  and use_dma_rx members in the atmel_uart_data struct is set
+	  appropriately for each port.
+
+	  Note that break and error handling currently doesn't work
+	  properly when DMA is enabled. Make sure that ports where
+	  this matters don't use DMA.
+
 config SERIAL_ATMEL_TTYAT
 	bool "Install as device ttyATn instead of ttySn"
 	depends on SERIAL_ATMEL=y
@@ -465,20 +480,24 @@
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT
 	select SERIAL_CORE
-	help
-	  DZ11-family serial controllers for VAXstations, including the
-	  DC7085, M7814, and M7819.
+	default y
+	---help---
+	  DZ11-family serial controllers for DECstations and VAXstations,
+	  including the DC7085, M7814, and M7819.
 
 config SERIAL_DZ_CONSOLE
 	bool "Support console on DECstation DZ serial driver"
 	depends on SERIAL_DZ=y
 	select SERIAL_CORE_CONSOLE
-	help
+	default y
+	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
 	  kernel messages and warnings and which allows logins in single user
-	  mode).  Note that the firmware uses ttyS0 as the serial console on
-	  the Maxine and ttyS2 on the others.
+	  mode).
+
+	  Note that the firmware uses ttyS3 as the serial console on
+	  DECstations that use this driver.
 
 	  If unsure, say Y.
 
@@ -667,7 +686,7 @@
 
 config SERIAL_BFIN_UART1
 	bool "Enable UART1"
-	depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x)
+	depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
 	help
 	  Enable UART1
 
@@ -680,14 +699,14 @@
 
 config UART1_CTS_PIN
 	int "UART1 CTS pin"
-	depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
+	depends on BFIN_UART1_CTSRTS && !BF54x
 	default -1
 	help
 	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
 
 config UART1_RTS_PIN
 	int "UART1 RTS pin"
-	depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
+	depends on BFIN_UART1_CTSRTS && !BF54x
 	default -1
 	help
 	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
@@ -877,15 +896,15 @@
 	  systems.  Say Y if you want to be able to use this device.
 
 config SERIAL_IP22_ZILOG
-	tristate "IP22 Zilog8530 serial support"
-	depends on SGI_IP22
+	tristate "SGI Zilog8530 serial support"
+	depends on SGI_HAS_ZILOG
 	select SERIAL_CORE
 	help
-	  This driver supports the Zilog8530 serial ports found on SGI IP22
+	  This driver supports the Zilog8530 serial ports found on SGI
 	  systems.  Say Y or M if you want to be able to these serial ports.
 
 config SERIAL_IP22_ZILOG_CONSOLE
-	bool "Console on IP22 Zilog8530 serial port"
+	bool "Console on SGI Zilog8530 serial port"
 	depends on SERIAL_IP22_ZILOG=y
 	select SERIAL_CORE_CONSOLE
 
@@ -960,6 +979,30 @@
 	  This driver supports the built-in serial ports of the Motorola ColdFire
 	  family of CPUs.
 
+config SERIAL_MCF
+	bool "Coldfire serial support (new style driver)"
+	depends on COLDFIRE
+	select SERIAL_CORE
+	help
+	  This new serial driver supports the Freescale Coldfire serial ports
+	  using the new serial driver subsystem.
+
+config SERIAL_MCF_BAUDRATE
+	int "Default baudrate for Coldfire serial ports"
+	depends on SERIAL_MCF
+	default 19200
+	help
+	  This setting lets you define what the default baudrate is for the
+	  ColdFire serial ports. The usual default varies from board to board,
+	  and this setting is a way of catering for that.
+
+config SERIAL_MCF_CONSOLE
+	bool "Coldfire serial console support"
+	depends on SERIAL_MCF
+	select SERIAL_CORE_CONSOLE
+	help
+	  Enable a ColdFire internal serial port to be the system console.
+
 config SERIAL_68360_SMC
 	bool "68360 SMC uart support"
 	depends on M68360
@@ -1114,17 +1157,17 @@
 		say Y.  Otherwise, say N.
 
 config SERIAL_MPC52xx
-	tristate "Freescale MPC52xx family PSC serial support"
-	depends on PPC_MPC52xx
+	tristate "Freescale MPC52xx/MPC512x family PSC serial support"
+	depends on PPC_MPC52xx || PPC_MPC512x
 	select SERIAL_CORE
 	help
-	  This drivers support the MPC52xx PSC serial ports. If you would
-	  like to use them, you must answer Y or M to this option. Not that
+	  This driver supports MPC52xx and MPC512x PSC serial ports. If you would
+	  like to use them, you must answer Y or M to this option. Note that
 	  for use as console, it must be included in kernel and not as a
 	  module.
 
 config SERIAL_MPC52xx_CONSOLE
-	bool "Console on a Freescale MPC52xx family PSC serial port"
+	bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
 	depends on SERIAL_MPC52xx=y
 	select SERIAL_CORE_CONSOLE
 	help
@@ -1132,7 +1175,7 @@
 	  of the Freescale MPC52xx family as a console.
 
 config SERIAL_MPC52xx_CONSOLE_BAUD
-	int "Freescale MPC52xx family PSC serial port baud"
+	int "Freescale MPC52xx/MPC512x family PSC serial port baud"
 	depends on SERIAL_MPC52xx_CONSOLE=y
 	default "9600"
 	help
@@ -1271,8 +1314,8 @@
 	depends on SERIAL_NETX
 	select SERIAL_CORE_CONSOLE
 	help
-	  If you have enabled the serial port on the Motorola IMX
-	  CPU you can make it the console by answering Y to this option.
+	  If you have enabled the serial port on the Hilscher NetX SoC
+	  you can make it the console by answering Y to this option.
 
 config SERIAL_OF_PLATFORM
 	tristate "Serial port on Open Firmware platform bus"
@@ -1284,6 +1327,31 @@
 	  Currently, only 8250 compatible ports are supported, but
 	  others can easily be added.
 
+config SERIAL_QE
+	tristate "Freescale QUICC Engine serial port support"
+	depends on QUICC_ENGINE
+	select SERIAL_CORE
+	select FW_LOADER
+	default n
+	help
+	  This driver supports the QE serial ports on Freescale embedded
+	  PowerPC that contain a QUICC Engine.
+
+config SERIAL_SC26XX
+	tristate "SC2681/SC2692 serial port support"
+	depends on SNI_RM
+	select SERIAL_CORE
+	help
+	  This is a driver for the onboard serial ports of
+	  older RM400 machines.
+
+config SERIAL_SC26XX_CONSOLE
+	bool "Console on SC2681/SC2692 serial port"
+	depends on SERIAL_SC26XX
+	select SERIAL_CORE_CONSOLE
+	help
+	  Support for Console on SC2681/SC2692 serial ports.
+
 config SERIAL_USBGECKO
 	bool "USBGecko adapter on the Nintendo GameCube/Wii"
 	depends on GAMECUBE_EXI