[CVS] avview lircrc.example,NONE,1.1 README,1.20,1.21

[Receive n. of C. c. <gat...@li...>]

Update of /cvsroot/gatos/avview
In directory sc8-pr-cvs2.sourceforge.net:/tmp/cvs-serv19613

Modified Files:
	README 
Added Files:
	lircrc.example 
Log Message:
Add more detailed instructions about LIRC


Index: README
===================================================================
RCS file: /cvsroot/gatos/avview/README,v
retrieving revision 1.20
retrieving revision 1.21
diff -u -d -r1.20 -r1.21
--- README	9 Nov 2004 16:51:45 -0000	1.20
+++ README	12 Nov 2006 20:06:22 -0000	1.21
@@ -50,8 +50,8 @@
 	*** Pressed anywhere in AVview ***
 	
 	Control-F                toggle fullscreen
-	Keypad + or -  	         switch favorite channels
-	Control-Keypad + or -	 increas/decreases channel number
+	Keypad + or -            switch favorite channels
+	Control-Keypad + or -    increas/decreases channel number
 	Control-i                switch between tuner/composite/svideo
 	Keypad *                 toggle mute
 	Arrow Up/Down            switch on-screen controls
@@ -76,12 +76,11 @@
 *** LIRC CONFIGURATION ***
 
        * LIRC (Linux Infrared Remote Control) commands are defined in
-	 file ~/.lircrc, see
-	 <http://www.lirc.org/html/configure.html#lircrc_format> for
-	 description of the file format. Each entry in the file has
-	 prog field telling which application should handle the button
-	 press. For AVview this field is 'avview' (without the
-	 apostrophes). The following commands are recogniced as config
+	 file ~/.lircrc. Each entry in the file consist of at least
+	 button, prog and config fields. Button names can be found
+	 from /etc/lircd/lircd.conf or from graphical utility like KDE
+	 LIRC server. prog field has to be set to 'avview' (without
+	 the apostrophes). The following commands are valid config
 	 field values:
 
 	 fullscreen		 toggle fullscreen mode
@@ -101,3 +100,9 @@
 	 channel val		 select channel val. val is channel
 				 name (e.g. E5)
 	 channel_number val	 select channel number val
+
+	 See <http://www.lirc.org/html/configure.html> for further
+	 description of the file format and instructions on setting up
+	 LIRC. File lircrc.example contains a config file template
+	 that you can edit and append to ~/.lircrc (you may need to
+	 change the button names).

--- NEW FILE: lircrc.example ---
begin
    button = CH+
    prog = avview
    config = next_channel +1
end

begin
    button = CH-
    prog = avview
    config = next_channel -1
end

begin
    button = VOL+
    prog = avview
    config = volume 1
    repeat = 1
end

begin
    button = VOL-
    prog = avview
    config = volume -1
    repeat = 1
end

begin
    button = 1
    prog = avview
    config = channel_number 1
end

begin
    button = 2
    prog = avview
    config = channel_number 2
end

begin
    button = 3
    prog = avview
    config = channel_number 3
end

begin
    button = 4
    prog = avview
    config = channel_number 4
end

begin
    button = 5
    prog = avview
    config = channel_number 5
end

begin
    button = 6
    prog = avview
    config = channel_number 6
end

begin
    button = 7
    prog = avview
    config = channel_number 7
end

begin
    button = 8
    prog = avview
    config = channel_number 8
end

begin
    button = 9
    prog = avview
    config = channel_number 9
end

begin
    button = 0
    prog = avview
    config = channel_number 0
end

begin
    button = POWER
    prog = avview
    config = exit
end