RE: [GATOS]No sound through avview (Was:No joy getting radeon and mandrake 8.2 to watch tv)
Status: Beta
Brought to you by:
volodya
From: Duke S. <duk...@co...> - 2003-05-05 17:14:35
|
Thanks for the help! I now have video going on in avview! What I don't have is sound working - only in avview, it seems. I did get the ALSA drivers, compile, install, etc. I have sound working on the rest of my system - dings and such. I just don't hear anything with the tv avview. I looks great though! :) I'm running the 2.4.28-6mdk kernel that comes with Mandrake 8.2 - seems they compile everything in as a module, so I should be ok there. Any suggestions to get sound working? Thanks for all the help so far! duke Here's my modules.conf file - alias usb-interface usb-uhci # alias sound-slot-0 emu10k1 # alias sound-slot-0 snd-card-0 probeall scsi_hostadapter ide-scsi alias eth0 3c59x alias char-major-81 videodev alias char-major-81-0 radeon # ALSA portion alias char-major-116 snd alias snd-card-0 snd-emu10k1 # module options should go here # OSS/Free portion alias char-major-14 soundcore alias sound-slot-0 snd-card-0 # card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ************************************************************** Here's my lsmod listing while avview is running - Module Size Used by Not tainted isofs 25792 0 (autoclean) inflate_fs 19328 0 (autoclean) [isofs] vfat 9788 0 (autoclean) fat 31384 0 (autoclean) [vfat] sr_mod 15160 0 (autoclean) videodev 4896 0 (autoclean) radeon 92184 1 agpgart 31552 3 (autoclean) snd-seq-midi 3616 0 (autoclean) (unused) snd-emu10k1-synth 4608 0 (autoclean) (unused) snd-emux-synth 26684 0 (autoclean) [snd-emu10k1-synth] snd-seq-midi-emul 4976 0 (autoclean) [snd-emux-synth] snd-seq-virmidi 2984 0 (autoclean) [snd-emux-synth] snd-seq-oss 25952 0 (unused) snd-seq-midi-event 3400 0 [snd-seq-midi snd-seq-virmidi snd-seq-oss] snd-seq 37388 2 [snd-seq-midi snd-emux-synth snd-seq-midi-emul snd-seq-virmidi snd-seq-oss snd-seq-midi-event] snd-pcm-oss 39460 0 snd-mixer-oss 11264 1 [snd-pcm-oss] snd-emu10k1 63076 1 [snd-emu10k1-synth] snd-pcm 57728 0 [snd-pcm-oss snd-emu10k1] snd-timer 13440 0 [snd-seq snd-pcm] snd-ac97-codec 34352 0 [snd-emu10k1] snd-rawmidi 12512 0 [snd-seq-midi snd-seq-virmidi snd-emu10k1] snd-page-alloc 5248 0 [snd-emu10k1 snd-pcm] snd-util-mem 1488 0 [snd-emux-synth snd-emu10k1] snd-seq-device 4068 0 [snd-seq-midi snd-emu10k1-synth snd-emux-synth snd-seq-oss snd-seq snd-emu10k1 snd-rawmidi] snd-hwdep 4352 0 [snd-emu10k1] snd 31328 0 [snd-seq-midi snd-emux-synth snd-seq-virmidi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-pcm snd-timer snd-ac97-codec snd-rawmidi snd-util-mem snd-seq-device snd-hwdep] soundcore 4068 10 [snd] parport_pc 22088 1 (autoclean) lp 6464 0 (autoclean) parport 23968 1 (autoclean) [parport_pc lp] af_packet 12488 0 (autoclean) ip_vs 65400 0 (autoclean) keybdev 1856 0 (unused) mousedev 4160 1 hid 18528 0 (unused) usbmouse 1984 0 (unused) input 3616 0 [keybdev mousedev hid usbmouse] usb-uhci 21668 0 (unused) usbcore 59072 1 [hid usbmouse usb-uhci] 3c59x 25928 1 (autoclean) supermount 62180 3 (autoclean) ide-scsi 8032 0 scsi_mod 92488 2 [sr_mod ide-scsi] rtc 5912 0 (autoclean) ext3 62092 2 jbd 39356 2 [ext3] On Friday 02 May 2003 01:41 pm, Duke Senter wrote: > Greetings, > I've just joined this list, but have read most of what I can on the > website. > > My goal is to eventually have a home-grown tivo type thing with mythtv. > I have an ATI Radeon All-in-wonder 7500 in a P4 Dell box running Mandrake > 8.2 > > I've been trying to get the gatos driver to work properly and have run into > significant troubles - probably all self-inflicted. I tried following the > "Watching TV conservative setup", but ran into a roadblock with avview not > working with tcl/tk version. I ditched that and tried getting kwintv to > work, but then realized that /dev/video0 doesn't exist. So then I started > again with http://www.reades.com/radeon.html > <http://www.reades.com/radeon.html> thinking that I had missed something > critical on the "Watching TV conservative setup." > > I assume there will be questions of what I've done so far, but since I > don't want to fill up a 6 page email with the details, I'll say where I'm > at now. Maybe someone can ask questions and we can figure out where I've > gone awry. > > I now have gotten down to the avview install. I have compiled and > installed tcl/tk 8.4.2. > > Note #1: I ran into a hitch on the KM install with the make test. > I get the following: > [root@....]# make test > sync > insmod ./km_api.o > ./km_api.o: unresolved symbol create_proc_entry_R6e2dd256 > ./km_api.o: unresolved symbol proc_root_R9bf88e21 > ./km_api.o: unresolved symbol remove_proc_entry_Rdd64248a > make: *** [test] Error 1 > > Note #2: When I run avview I get an error that I'm not sure what went wrong > ./start_avview.no_install > ./avview_shell : error while loading shared libraries: libtcl8.4.so: cannot > open shared object file: No such file or directory > > I configured avview with the following flags > --with-ffmpeg=/home/duke/video/ffmpeg-0.4.6 > --with-tcl=/usr/local/lib > --with-tk=/usr/local/lib > > Which succeeded. > Contents of /usr/local/lib: > libtcl8.4.so > libtk8.4.so > tcl8.4/ > tk8.4/ > vhook/ > libtclstub8.4.a > libtkstub8.4.a > tclConfig.sh > tkConfig.sh > wnn@ --> ../../../usr/lib/wnn > > Any suggestions or clarifications I need to provide? > Thanks for your time, > Duke Senter |