Re: [G4l-general] Toshiba Tecra and Marvell Yukon 88E8036 Ethernet

[Hamish <li...@su...>]

Hi Michael
Thanks for your quick reply. I have tried to use bzImage7 with the iso that=
=20
you linked, unfortunately with no success. In dmesg, I see a lot of:

eth0: incorrect signature 0xffff
PP_addr=3D0xffff

Is it built into this kernel? It does not seem to be using modules, lsmod=20
shows nothing. Any idea what else I can try?

Thanks again for your quick help!

Hamish

On Thursday 13 October 2005 18:18, Michael D. Setzer II wrote:
> Which kernel are you using?
> Not sure if it is in on the bzImage6 kernel of the 0.16 version, but
> just checked the kernel I have in my latest testing version, and it has
> the SK98xx selected, so you could check this one out. It is actually
> the 2.6.13.1 kernel, thou I didn't change the kernel select screen,
> and this is bzImage7 not the default bzImage6, so type bzImage7 on
> the prompt to load that kernel.
>
> The link is below, since this isn't offical. It has some updated kernel
> options, and has some of the utilities updated.
>
> ftp://amd64gcc.dyndns.org/g4l-0.17pp.iso
>
> On 13 Oct 2005 at 17:16, Hamish wrote:
>
> From:	Hamish <li...@su...>
> To:	g4l...@li...
> Subject:	[G4l-general] Toshiba Tecra and Marvell Yukon 88E8036 Ethernet
> Date sent:	Thu, 13 Oct 2005 17:16:38 +0100
>
> > Hello
> > I am having problems with network configuration of the 88E8036 card in a
> > toshiba tecra A3. Apparently it can work with the sk98lin driver-
> > (8.18.2.2 (beta)). How can I add this driver to my G4L disks?
> > Thanks,
> > Hamish
>