Re: [Freevo-users] Recording not working

[<jo...@de...>]

> Hi!
>
> Am Fr, den 27.02.2004 schrieb jo...@de... um 23:24:
>> 2004/02/27 13:10 AKST [*RecordServer*] popen ./runtime/runapp
>> /usr/local/bin/mencoder -tv
>> on:driver=v4l:input=0:norm=NTSC:channel=11:chanlist=us-cable:width=320:height=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp0:audiorate=44100:forceaudio:forcechan=1:buffersize=64
>> -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame
>> -lameopts br=128:cbr:mode=3 -ffourcc divx -endpos 289 -o
>> /home/jonr/Movies//02-27_13:10_Manual_Recorded_-_.avi
>> 2004/02/27 13:10 AKST [*RecordServer*] Record_Thread::run: past wait()!!
>> 2004/02/27 13:10 AKST [*RecordServer*] RECORDSERVER GOT EVENT NOTICE
>> 2004/02/27 13:10 AKST [*RecordServer*] RECORDSERVER GOT EVENT NOTICE
>> 2004/02/27 13:10 AKST [*RecordServer*] RECORDSERVER HANDLING EVENT
>> 2004/02/27 13:10 AKST [*RecordServer*] killing pid 31777 with sig 15
>
> That means, mencoder immediately dies.
> Did you try this exact command on the commandline to see, if mencoder is
> working at all?
>
> Cheers,
> Manuel
>
> --
> ma...@ma...
> http://www.matronix.de -
> http://www.elektronik-kompendium.de/public/borchers
>

 Thanks Manuel,

 I don't know why I didn't try that first before posting. When I run the
command from the command line this is the error I get:

 /usr/local/bin/mencoder tv://
on:driver=v4l:inout=0:norm=NTSC:channel=11:chanlist=us-cable:width320:height=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp0:audiorate=44100:forceaudio:forcechan=1:buffersize=64
-ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1200:keyint -oac mp3lame
-lameopts br=128:cbr:mode=3 -ffourcc divx test2.avi
MEncoder 1.0pre3-3.2.2 (C) 2000-2003 MPlayer Team

CPU: Intel Celeron 2/Pentium III Coppermine,Geyserville 731.1 MHz (Family:
6, Stepping: 3)
Detected cache-line size is 32 bytes
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX MMX2 SSE

Reading /root/.mplayer/codecs.conf: Can't open
'/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/etc/mplayer/codecs.conf: Can't open
'/usr/local/etc/mplayer/codecs.conf': No such file or directory
Using built-in default codecs.conf.
File not found: 'frameno.avi'
Failed to open frameno.avi
Reading config file /root/.mplayer/mencoder: No such file or directory
Error: option 'lavcopts' must have a parameter!
Exiting... (error parsing cmdline)

lavcopts does have the parameter vcodec= but it doesn't seem to recognize
this. Doing google searches turnedup many examples showing just this
syntax, what am I doing wrong?

Jon