Re: [FreeRDP-devel] Building Shadow Server on Windows 7 (64-bit)?

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Hi Armin,

I will locate the libraries to use in VS Express 2012.

You are right, of course, in that I should start simpler with just the
basic compile flags needed to produce the initial executable, but I grabbed
the same flags that I used on my Linux compile which were just fine there
and wanted to see how far off I would be to get a similar compile. My
Ubuntu 18.04 compile gives me the Shadow Server as well as the rdp client
and I wanted to replicate the exact same executables.

I will start simpler and build up to that point to see if I can get it to
work.

BTW, I am impressed with the ideas that you have in your developing and
using the WinPR library as a shim between platforms. Awesome idea.

On Tue, Aug 20, 2019 at 10:30 AM Armin Novak via FreeRDP-devel <
fre...@li...> wrote:

> Well, libjpeg of course ;)
>
> The names match the libraries...
>
>
> but why do you start out with exotic compile flags while not even have a
> working build already?
>
> On 8/20/19 2:31 PM, Lonnie Cumberland via FreeRDP-devel wrote:
> > Openssl is installed.
> >
> > I installed according:
> >
> >
> >    - MS Visual C++ Express 2012 http://www.microsoft.com/express
> Microsoft
> >    Visual C++ Express (Namely Visual Studio Express For Desktop (SDK
> Included)
> >    - OpenSSL Library http://slproweb.com/products/Win32OpenSSL.html
> >    - cmake http://www.cmake.org/cmake/resources/software.html
> >    - git http://code.google.com/p/tortoisegit/
> >
> > What libraries have you installed for the others optional things JPEG,
> > sound.... on Windows 7 Pro (64 bit)?
> >
> >
> > On Tue, Aug 20, 2019 at 8:28 AM Armin Novak via FreeRDP-devel <
> > fre...@li...> wrote:
> >
> >> Openssl ;)
> >>
> >> Everything else is optional (of course, if you activate it...)
> >>
> >> Am August 20, 2019 12:21:28 PM UTC schrieb Lonnie Cumberland via
> >> FreeRDP-devel <fre...@li...>:
> >>> Forgot to mention is I do realize that the JPEG library is missing in
> >>> my
> >>> previous message but as the other dependencies are also missing, I
> >>> wanted
> >>> to find out what libraries you installed for your builds as I think
> >>> that
> >>> you are also building the Windows 32/64 versions in the nightly builds
> >>> so I
> >>> want to make sure that I have replicated your libraries and setup to
> >>> use as
> >>> the base from which I will work.
> >>>
> >>>
> >>> On Tue, Aug 20, 2019 at 7:53 AM Lonnie Cumberland <lo...@ou...>
> >>> wrote:
> >>>
> >>>> Just tried it but seems like I am missing some more dependencies.
> >>>>
> >>>> --------------------------------------
> >>>> c:\freerdp>git clone git://github.com/FreeRDP/FreeRDP.git
> >>>> Cloning into 'FreeRDP'...
> >>>> remote: Enumerating objects: 82, done.
> >>>> remote: Counting objects: 100% (82/82), done.
> >>>> remote: Compressing objects: 100% (77/77), done.
> >>>> remote: Total 115192 (delta 33), reused 15 (delta 5), pack-reused
> >>> 115110
> >>>> Receiving objects: 100% (115192/115192), 37.33 MiB | 6.54 MiB/s,
> >>> done.
> >>>> Resolving deltas: 100% (88075/88075), done.
> >>>> Updating files: 100% (2337/2337), done.
> >>>> -----------------------------
> >>>> c:\freerdp>cd FreeRDP
> >>>> -------------------------
> >>>> c:\freerdp\FreeRDP>mkdir build
> >>>> -----------------------
> >>>> c:\freerdp\FreeRDP>cd build
> >>>> -------------------------
> >>>> c:\freerdp\FreeRDP\build>cmake -DCHANNEL_URBDRC=ON
> >>> -DWITH_DSP_FFMPEG=ON
> >>>> -DWITH_C UPS=ON -DWITH_PULSE=ON -DWITH_FAAD2=ON -DWITH_GSM=ON
> >>>> -DWITH_JPEG=ON -DWITH_SERVE R=ON -DMONOLITHIC_BUILD=ON
> >>>> -DBUILD_SHARED_LIBS=OFF -DWITH_SSE2=OFF ..
> >>>>
> >>>> -- Building for: Visual Studio 11 2012
> >>>> -- The C compiler identification is MSVC 17.0.50727.1
> >>>> -- The CXX compiler identification is MSVC 17.0.50727.1
> >>>> -- Check for working C compiler: C:/Program Files (x86)/Microsoft
> >>> Visual
> >>>> Studio 11.0/VC/bin/cl.exe
> >>>> -- Check for working C compiler: C:/Program Files (x86)/Microsoft
> >>> Visual
> >>>> Studio 11.0/VC/bin/cl.exe -- works
> >>>> -- Detecting C compiler ABI info
> >>>> -- Detecting C compiler ABI info - done
> >>>> -- Detecting C compile features
> >>>> -- Detecting C compile features - done
> >>>> -- Check for working CXX compiler: C:/Program Files (x86)/Microsoft
> >>> Visual
> >>>> Studio 11.0/VC/bin/cl.exe
> >>>> -- Check for working CXX compiler: C:/Program Files (x86)/Microsoft
> >>> Visual
> >>>> Studio 11.0/VC/bin/cl.exe -- works
> >>>> -- Detecting CXX compiler ABI info
> >>>> -- Detecting CXX compiler ABI info - done
> >>>> -- Detecting CXX compile features
> >>>> -- Detecting CXX compile features - done
> >>>> -- Could NOT find PkgConfig (missing:
> >>>> PKG_CONFIG_EXECUTABLE) FREERDP_VERSION=2.0.0-dev5
> >>>> -- Git Revision 81cb0a7ee
> >>>> -- MSVC: using dynamically-linked runtime (/MD and /MDd).
> >>>> -- Looking for include file fcntl.h
> >>>> -- Looking for include file fcntl.h - found
> >>>> -- Looking for include file unistd.h
> >>>> -- Looking for include file unistd.h - not found
> >>>> -- Looking for include file execinfo.h
> >>>> -- Looking for include file execinfo.h - not found
> >>>> -- Looking for include file inttypes.h
> >>>> -- Looking for include file inttypes.h - not found
> >>>> -- Looking for include file sys/modem.h
> >>>> -- Looking for include file sys/modem.h - not found
> >>>> -- Looking for include file sys/filio.h
> >>>> -- Looking for include file sys/filio.h - not found
> >>>> -- Looking for include file sys/sockio.h
> >>>> -- Looking for include file sys/sockio.h - not found
> >>>> -- Looking for include file sys/strtio.h
> >>>> -- Looking for include file sys/strtio.h - not found
> >>>> -- Looking for include file sys/select.h
> >>>> -- Looking for include file sys/select.h - not found
> >>>> -- Looking for include file syslog.h
> >>>> -- Looking for include file syslog.h - not found
> >>>> -- Performing Test HAVE_TM_GMTOFF
> >>>> -- Performing Test HAVE_TM_GMTOFF - Failed
> >>>> -- Looking for pthread.h
> >>>> -- Looking for pthread.h - not found
> >>>> -- Found Threads: TRUE
> >>>> -- Skipping disabled feature X11 for X11 (X11 client and server)
> >>>> -- Skipping disabled feature Wayland for Wayland (Wayland client)
> >>>> -- Skipping disabled feature ZLIB for compression (data compression)
> >>>> -- Finding required feature OpenSSL for cryptography (encryption,
> >>>> certificate validation, hashing functions)
> >>>> -- Found OpenSSL:
> >>>> C:/OpenSSL-Win64/lib/libssl.lib;C:/OpenSSL-Win64/lib/libcrypto.lib
> >>> (found
> >>>> version "1.1.0k")
> >>>> -- Skipping optional feature MbedTLS for cryptography (encryption,
> >>>> certificate validation, hashing functions)
> >>>> --     Enable feature MbedTLS using "-DWITH_MBEDTLS=ON"
> >>>>
> >>>> -- Skipping disabled feature OpenSLES for multimedia (OpenSLES audio
> >>> /
> >>>> video)
> >>>> -- Skipping disabled feature OSS for sound (audio input, audio output
> >>> and
> >>>> multimedia redirection)
> >>>> -- Skipping disabled feature ALSA for sound (audio input, audio
> >>> output and
> >>>> multimedia redirection)
> >>>> -- Skipping disabled feature Pulse for sound (audio input, audio
> >>> output
> >>>> and multimedia redirection)
> >>>> -- Skipping disabled feature Cups for printing (printer device
> >>> redirection)
> >>>> -- Skipping disabled feature PCSC for smart card (smart card device
> >>>> redirection)
> >>>>
> >>>> -- Skipping disabled feature FFmpeg for multimedia (multimedia
> >>>> redirection, audio and video playback)
> >>>> -- Skipping optional feature GStreamer_0_10 for multimedia
> >>> (multimedia
> >>>> redirection, audio and video playback, gstreamer 0.10 version)
> >>>> --     Enable feature GStreamer_0_10 using "-DWITH_GSTREAMER_0_10=ON"
> >>>> -- Skipping disabled feature GStreamer_1_0 for multimedia (multimedia
> >>>> redirection, audio and video playback)
> >>>>
> >>>> -- Finding optional feature JPEG for codec (use JPEG library
> >>>> CMake Error at C:/Program
> >>>>
> >>>
> Files/CMake/share/cmake-3.15/Modules/FindPackageHandleStandardArgs.cmake:137
> >>>> (message):  Could NOT find JPEG (missing: JPEG_LIBRARY
> >>> JPEG_INCLUDE_DIR)
> >>>> Call Stack (most recent call first):
> >>>>   C:/Program
> >>>>
> >>>
> Files/CMake/share/cmake-3.15/Modules/FindPackageHandleStandardArgs.cmake:378
> >>>> (_FPHSA_FAILURE_MESSAGE)
> >>>>   C:/Program Files/CMake/share/cmake-3.15/Modules/FindJPEG.cmake:100
> >>>> (find_package_handle_standard_args)
> >>>>   cmake/FindFeature.cmake:31 (find_package)
> >>>>   CMakeLists.txt:866 (find_feature)
> >>>>
> >>>> -- Configuring incomplete, errors occurred!
> >>>> See also "C:/freerdp/FreeRDP/build/CMakeFiles/CMakeOutput.log".
> >>>> See also "C:/freerdp/FreeRDP/build/CMakeFiles/CMakeError.log".
> >>>> ---------------------------
> >>>> c:\freerdp\FreeRDP\build>
> >>>> ----------------------------------------
> >>>>
> >>>> I may have to figure out some more dependencies it seems.
> >>>>
> >>>> On that note, I did read somewhere in your documentation that perhaps
> >>> I
> >>>> need to install the "Windows 8.1 SDK". Is that the major dependency
> >>> missing
> >>>> to cover all of these?
> >>>> Thanks again
> >>>>
> >>>>
> >>>>
> >>>> On Tue, Aug 20, 2019 at 7:31 AM Lonnie Cumberland
> >>> <lo...@ou...>
> >>>> wrote:
> >>>>
> >>>>> Oh, I see.
> >>>>>
> >>>>> I have been trying to build everything from within visual studio. I
> >>>>> thought that the "cmake . -G"Visual Studio 11 Win64" just configured
> >>> the
> >>>>> solution file so that it would compile from within the IDE. My
> >>> mistake here.
> >>>>> On Tue, Aug 20, 2019 at 7:24 AM Armin Novak via FreeRDP-devel <
> >>>>> fre...@li...> wrote:
> >>>>>
> >>>>>> It works the same, ignore the solution files.
> >>>>>>
> >>>>>> Am August 20, 2019 11:18:51 AM UTC schrieb Lonnie Cumberland <
> >>>>>> lo...@ou...>:
> >>>>>>> Morning Armin,
> >>>>>>>
> >>>>>>> I'll give that a try.
> >>>>>>>
> >>>>>>> On thing though, didn't I read in your documentation for the VS
> >>> Express
> >>>>>>> 2012 that you are just supposed to start with "cmake . -G"Visual
> >>> Studio
> >>>>>>> 11
> >>>>>>> Win64" first which generates the .sln VS solution file and then
> >>> you are
> >>>>>>> suppose to add the defines from within the IDE?
> >>>>>>>
> >>>>>>> When I build on Linux, my build cmake string looks like:
> >>>>>>>
> >>>>>>> ------------------
> >>>>>>> cmake -GNinja -DCHANNEL_URBDRC=ON -DWITH_DSP_FFMPEG=ON
> >>> -DWITH_CUPS=ON
> >>>>>>> -DWITH_PULSE=ON -DWITH_FAAD2=ON -DWITH_GSM=ON -DWITH_JPEG=ON
> >>>>>>> -DWITH_SERVER=ON -DMONOLITHIC_BUILD=ON -DBUILD_SHARED_LIBS=OFF ..
> >>>>>>>
> >>>>>>> cmake --build .
> >>>>>>> ------------------
> >>>>>>>
> >>>>>>> Can I do the similar thing plus adding the SSE2 define that you
> >>>>>>> mentioned.
> >>>>>>> Thanks again,
> >>>>>>> Lonnie
> >>>>>>>
> >>>>>>>
> >>>>>>> On Tue, Aug 20, 2019 at 2:15 AM Armin Novak via FreeRDP-devel <
> >>>>>>> fre...@li...> wrote:
> >>>>>>>
> >>>>>>>> Ok, you're missing some assembly stuff.
> >>>>>>>>
> >>>>>>>> Just tryADDING -DWITH_SSE2=OFF TO cmake configuration.
> >>>>>>>>
> >>>>>>>> Regards
> >>>>>>>> Armin
> >>>>>>>>
> >>>>>>>> Am August 20, 2019 1:27:40 AM UTC schrieb Lonnie Cumberland <
> >>>>>>>> lo...@ou...>:
> >>>>>>>>> Hi Armin,
> >>>>>>>>>
> >>>>>>>>> I just got around to trying to re-compile FreeRDP using the VS
> >>> 2012
> >>>>>>>>> Express.
> >>>>>>>>>
> >>>>>>>>> The errors that I mentioned in my last post about this are as
> >>>>>>> follows:
> >>>>>>>>> Error 328 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 53
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 329 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 54
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 330 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 55
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 331 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 57
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 332 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 60
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 333 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 61
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 334 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 62
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 335 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 64
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 336 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 67
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 337 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 68
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 338 error C2440: 'initializing' : cannot convert from
> >>>>>>> '__m128i'
> >>>>>>>>> to
> >>>>>>>>> 'char'
> >>> C:\freerdp\FreeRDP\libfreerdp\primitives\prim_YUV_ssse3.c 70
> >>>>>>> 1
> >>>>>>>>> freerdp (FreeRDP\libfreerdp\freerdp)
> >>>>>>>>> Error 379 error LNK1104: cannot open file
> >>> '..\..\Debug\freerdp2.lib'
> >>>>>>>>> C:\freerdp\FreeRDP\client\common\LINK freerdp-client
> >>>>>>>>>
> >>>>>>>>> There were also about 367 Warnings regarding conversions and
> >>> other
> >>>>>>>>> similar
> >>>>>>>>> things.
> >>>>>>>>>
> >>>>>>>>> This was just the native compile via the generated solution
> >>> file (
> >>
> https://github.com/FreeRDP/FreeRDP/wiki/Build-on-Windows-Visual-C---2012-(32-and-64-bit)
> >>>>>>>> )
> >>>>>>>>> and I had not tried to figure out a VS build file for the
> >>> "Shadow
> >>>>>>>>> Server"
> >>>>>>>>> yet.  Do you have one of those setup that I can get?
> >>>>>>>>>
> >>>>>>>>> Cheers,
> >>>>>>>>> Lonnie
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> On Mon, Aug 19, 2019 at 7:01 AM Lonnie Cumberland
> >>>>>>> <lo...@ou...>
> >>>>>>>>> wrote:
> >>>>>>>>>
> >>>>>>>>>> Hi Armin,
> >>>>>>>>>>
> >>>>>>>>>> I was going to try a newer version of VS but since your
> >>> recipe
> >>>>>>> called
> >>>>>>>>> for
> >>>>>>>>>> either VS 2010 Express or VS 2012 Express (
> >>>>>>>>>> https://github.com/FreeRDP/FreeRDP/wiki/Compilation) I used
> >>> the
> >>>>>>> 2012
> >>>>>>>>>> version since I was hoping to minimize any compile issues and
> >>> to
> >>>>>>>>> replicate
> >>>>>>>>>> the builds that you have already had success.
> >>>>>>>>>>
> >>>>>>>>>> What version of VS has you had success with?  Please let me
> >>> know
> >>>>>>> and
> >>>>>>>>> I
> >>>>>>>>>> will try to use it as the goal if this part of my test is to
> >>> see
> >>>>>>> if I
> >>>>>>>>> can
> >>>>>>>>>> build the FreeRDP Shadow Server for the Windows platform as
> >>> well.
> >>>>>>> I
> >>>>>>>>> have
> >>>>>>>>>> already been able to do it for the Linux (Ubuntu 18.04) side
> >>> with:
> >>>>>>>>>> ---------------
> >>>>>>>>>>
> >>>>>>>>>> cmake -GNinja -DCHANNEL_URBDRC=ON -DWITH_DSP_FFMPEG=ON
> >>>>>>> -DWITH_CUPS=ON
> >>>>>>>>>> -DWITH_PULSE=ON -DWITH_FAAD2=ON -DWITH_GSM=ON -DWITH_JPEG=ON
> >>>>>>>>>> -DWITH_SERVER=ON -DMONOLITHIC_BUILD=ON
> >>> -DBUILD_SHARED_LIBS=OFF ..
> >>>>>>>>>> cmake --build .
> >>>>>>>>>> -----------------------
> >>>>>>>>>>
> >>>>>>>>>> On the Linux text, I was able run the shadow server on Ubuntu
> >>>>>>> 18.04
> >>>>>>>>>> (64-bit) and connect from a Windows 7 Pro (64-bit) RDP
> >>> client. The
> >>>>>>>>> shadow
> >>>>>>>>>> server seems to show that the plugins were loaded but the
> >>> sound
> >>>>>>> did
> >>>>>>>>> not
> >>>>>>>>>> come across when I did a quick test (did not check for the
> >>> other
> >>>>>>>>> plugin
> >>>>>>>>>> capabilities yet.).
> >>>>>>>>>>
> >>>>>>>>>> What I would like to do is to build the shadow server
> >>> possibly
> >>>>>>> with
> >>>>>>>>> static
> >>>>>>>>>> libraries to minimize library dependencies and then collect
> >>> all of
> >>>>>>>>> the
> >>>>>>>>>> binaries, and support files in a directory so that I can
> >>> package
> >>>>>>> up
> >>>>>>>>> the
> >>>>>>>>>> binary build to put on another system, but not sure of the
> >>> best
> >>>>>>> way
> >>>>>>>>> to go
> >>>>>>>>>> about this yet.
> >>>>>>>>>>
> >>>>>>>>>> You had a great suggestion about me looking into using the
> >>> shadow
> >>>>>>>>> server
> >>>>>>>>>> and I think that it will make an AWESOME base for me to build
> >>>>>>> from.
> >>>>>>>>>> Any ideas on the best way to have a static build and package
> >>> up
> >>>>>>> the
> >>>>>>>>>> binaries?  I thought that I saw a setting somewhere in my
> >>> FreeRDP
> >>>>>>>>> reading
> >>>>>>>>>> that allowed for static builds, but will have to go back to
> >>> try
> >>>>>>> and
> >>>>>>>>> find
> >>>>>>>>>> that information, if I was correct.
> >>>>>>>>>>
> >>>>>>>>>> All-in-all, I would say that things are off to a very good
> >>> start
> >>>>>>> and
> >>>>>>>>> I ml
> >>>>>>>>>> eager to see what I can do with the shadow server across the
> >>>>>>>>> platforms
> >>>>>>>>>> initially after which I want to start customizing things in
> >>> it for
> >>>>>>>>> the
> >>>>>>>>>> seamless mode effort.
> >>>>>>>>>>
> >>>>>>>>>> Cheers,
> >>>>>>>>>> Lonnie
> >>>>>>>>>>
> >>>>>>>>>> On Mon, Aug 19, 2019 at 3:39 AM Armin Novak via FreeRDP-devel
> >>> <
> >>>>>>>>>> fre...@li...> wrote:
> >>>>>>>>>>
> >>>>>>>>>>> Hi Lonnie,
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> not entirely sure the window shadow port is currently
> >>> working
> >>>>>>> (not
> >>>>>>>>> much
> >>>>>>>>>>> activity for some time) just a note:
> >>>>>>>>>>>
> >>>>>>>>>>> try more recent VS, the newer the better (they now actually
> >>>>>>> support
> >>>>>>>>> C99)
> >>>>>>>>>>> As for compilation issues, some hint what is not compiling
> >>> would
> >>>>>>> be
> >>>>>>>>>>> helpful to diagnose.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> regards
> >>>>>>>>>>>
> >>>>>>>>>>> Armin
> >>>>>>>>>>>
> >>>>>>>>>>> On 8/19/19 1:39 AM, Lonnie Cumberland via FreeRDP-devel
> >>> wrote:
> >>>>>>>>>>>> Hi All,
> >>>>>>>>>>>>
> >>>>>>>>>>>> Just a quick update. The VS 2012 Express build did not
> >>> work and
> >>>>>>> I
> >>>>>>>>> got a
> >>>>>>>>>>>> bunch of conversion errors.
> >>>>>>>>>>>>
> >>>>>>>>>>>> Maybe I need to get another Visual Studio to try?
> >>>>>>>>>>>>
> >>>>>>>>>>>> Any ideas?
> >>>>>>>>>>>> Thanks
> >>>>>>>>>>>>
> >>>>>>>>>>>> On Sun, Aug 18, 2019 at 7:36 PM Lonnie Cumberland
> >>>>>>>>> <lo...@ou...>
> >>>>>>>>>>>> wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>> Hi All,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> I normally run on Ubuntu 18.04 ()64-bit) but I would like
> >>> to
> >>>>>>>>> build the
> >>>>>>>>>>>>> FreeRDP Shadow Server on a Windows 7 Pro (64-bit) system.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> I have installed Visual Studio 2012 Express and the other
> >>>>>>>>> requirements.
> >>>>>>>>>>>>> Now I have just opened the sln (VS Solution) file and am
> >>>>>>> trying a
> >>>>>>>>>>> default
> >>>>>>>>>>>>> build from the Visual Studio environment.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Can you please tell me how to build the Shadow Server
> >>> either
> >>>>>>> by
> >>>>>>>>> the
> >>>>>>>>>>> Visual
> >>>>>>>>>>>>> Studio 2012 IDE environment or by the command line, or
> >>> both?
> >>>>>>>>>>>>> Thanks in advance,
> >>>>>>>>>>>>> Lonnie
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>> _______________________________________________
> >>>>>>>>>>>> FreeRDP-devel mailing list
> >>>>>>>>>>>> Fre...@li...
> >>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/freerdp-devel
> >>>>>>>>>>>
> >>>>>>>>>>> _______________________________________________
> >>>>>>>>>>> FreeRDP-devel mailing list
> >>>>>>>>>>> Fre...@li...
> >>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/freerdp-devel
> >>>>>>>>>>>
> >>>>>>>>
> >>>>>>>> _______________________________________________
> >>>>>>>> FreeRDP-devel mailing list
> >>>>>>>> Fre...@li...
> >>>>>>>> https://lists.sourceforge.net/lists/listinfo/freerdp-devel
> >>>>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> FreeRDP-devel mailing list
> >>>>>> Fre...@li...
> >>>>>> https://lists.sourceforge.net/lists/listinfo/freerdp-devel
> >>>>>>
> >>> _______________________________________________
> >>> FreeRDP-devel mailing list
> >>> Fre...@li...
> >>> https://lists.sourceforge.net/lists/listinfo/freerdp-devel
> >>
> >> _______________________________________________
> >> FreeRDP-devel mailing list
> >> Fre...@li...
> >> https://lists.sourceforge.net/lists/listinfo/freerdp-devel
> >>
> > _______________________________________________
> > FreeRDP-devel mailing list
> > Fre...@li...
> > https://lists.sourceforge.net/lists/listinfo/freerdp-devel
>
>
> _______________________________________________
> FreeRDP-devel mailing list
> Fre...@li...
> https://lists.sourceforge.net/lists/listinfo/freerdp-devel
>