FreeNAS 0.69.2 works with this hardware.
I tried to boot FreeNAS 0.7RC1 and 0.7RC2 with the following hardware, and it kernel panics during kernel detection.
Intel D915GAV motherboard
P4 3.2GHz CPU
4GB matching pair RAM
IDE PATA DVD-ROM
SATA Seagate 250GB harddrive
Intel Gigabit network card (em)
I have tried with and without hyperthreading, and with and without ACPI enabled on the LiveCD.
0.69.2 boots and works great with hyperthreading and ACPI enabled.
I hope you can fix this as I would really like ZFS support to build a FreeNAS on this hardware :-)
Here is the dmesg output from 0.7RC2, 0.7RC1 and 0.69.2.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p4 #0: Fri Oct 16 16:45:05 UTC 2009
root@vmbsd72i386:/usr/obj/freenas/usr/src/sys/FREENAS-i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 3455250432 (3295 MB)
avail memory = 3273670656 (3122 MB)
ACPI APIC Table: <INTEL D915GAV="">
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0 <Version 2.0=""> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <INTEL D915GAV=""> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cdf00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI="" bus=""> on pcib0
pcib1: <ACPI PCI-PCI="" bridge=""> at device 1.0 on pci0
pci1: <ACPI PCI="" bus=""> on pcib1
vgapci0: <VGA-compatible display=""> port 0xec00-0xec07 mem 0xff480000-0xff4fffff,0xd8000000-0xdfffffff,0xff440000-0xff47ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915G="" (915G="" GMCH)="" SVGA="" controller=""> on vgapci0
agp0: detected 32508k stolen memory
agp0: aperture size is 128M
pcib2: <ACPI PCI-PCI="" bridge=""> at device 28.0 on pci0
pci5: <ACPI PCI="" bus=""> on pcib2
pcib3: <ACPI PCI-PCI="" bridge=""> at device 28.1 on pci0
pci4: <ACPI PCI="" bus=""> on pcib3
pcib4: <ACPI PCI-PCI="" bridge=""> at device 28.2 on pci0
pci3: <ACPI PCI="" bus=""> on pcib4
pcib5: <ACPI PCI-PCI="" bridge=""> at device 28.3 on pci0
pci2: <ACPI PCI="" bus=""> on pcib5
uhci0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> port 0xc800-0xc81f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> mem 0xff43fc00-0xff43ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 2.00="" 1.00,="" addr="" 1=""> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI="" bridge=""> at device 30.0 on pci0
pci6: <ACPI PCI="" bus=""> on pcib6
em0: <Intel(R) PRO="" 1000="" Network="" Connection="" 6.9.6=""> port 0xbc00-0xbc3f mem 0xff500000-0xff51ffff,0xff520000-0xff53ffff irq 21 at device 0.0 on pci6
em0: [FILTER]
em0: Ethernet address: 00:0e:0c:b6:0d:b5
isab0: <PCI-ISA bridge=""> at device 31.0 on pci0
isa0: <ISA bus=""> on isab0
atapci0: <Intel ICH6="" UDMA100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel="" 0=""> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel="" 1=""> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6="" SATA150="" controller=""> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel="" 0=""> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel="" 1=""> on atapci1
ata3: [ITHREAD]
pci0: <serial bus,="" SMBus=""> at device 31.3 (no driver attached)
acpi_button0: <Power Button=""> on acpi0
atkbdc0: <Keyboard controller="" (i8042)=""> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard=""> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
speaker0: <PC speaker=""> port 0x61 on acpi0
cpu0: <ACPI CPU=""> on acpi0
est0: <Enhanced SpeedStep="" Frequency="" Control=""> on cpu0
est0: Guessed bus clock (high) of 199 MHz
Fatal trap 18: integer divide fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0x80b7ec39
stack pointer = 0x28:0x8703ea6c
frame pointer = 0x28:0x8703ead8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 18
panic: integer divide fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p1 #0: Fri Jun 19 20:56:48 UTC 2009
root@vmbsd72i386:/usr/obj/freenas/usr/src/sys/FREENAS-i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 3455250432 (3295 MB)
avail memory = 3277864960 (3126 MB)
ACPI APIC Table: <INTEL D915GAV="">
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0 <Version 2.0=""> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <INTEL D915GAV=""> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cdf00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI="" bus=""> on pcib0
pcib1: <ACPI PCI-PCI="" bridge=""> at device 1.0 on pci0
pci1: <ACPI PCI="" bus=""> on pcib1
vgapci0: <VGA-compatible display=""> port 0xec00-0xec07 mem 0xff480000-0xff4fffff,0xd8000000-0xdfffffff,0xff440000-0xff47ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915G="" (915G="" GMCH)="" SVGA="" controller=""> on vgapci0
agp0: detected 32508k stolen memory
agp0: aperture size is 128M
pcib2: <ACPI PCI-PCI="" bridge=""> at device 28.0 on pci0
pci5: <ACPI PCI="" bus=""> on pcib2
pcib3: <ACPI PCI-PCI="" bridge=""> at device 28.1 on pci0
pci4: <ACPI PCI="" bus=""> on pcib3
pcib4: <ACPI PCI-PCI="" bridge=""> at device 28.2 on pci0
pci3: <ACPI PCI="" bus=""> on pcib4
pcib5: <ACPI PCI-PCI="" bridge=""> at device 28.3 on pci0
pci2: <ACPI PCI="" bus=""> on pcib5
uhci0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> port 0xc800-0xc81f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> mem 0xff43fc00-0xff43ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 2.00="" 1.00,="" addr="" 1=""> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI="" bridge=""> at device 30.0 on pci0
pci6: <ACPI PCI="" bus=""> on pcib6
em0: <Intel(R) PRO="" 1000="" Network="" Connection="" 6.9.6=""> port 0xbc00-0xbc3f mem 0xff500000-0xff51ffff,0xff520000-0xff53ffff irq 21 at device 0.0 on pci6
em0: [FILTER]
em0: Ethernet address: 00:0e:0c:b6:0d:b5
isab0: <PCI-ISA bridge=""> at device 31.0 on pci0
isa0: <ISA bus=""> on isab0
atapci0: <Intel ICH6="" UDMA100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel="" 0=""> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel="" 1=""> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6="" SATA150="" controller=""> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel="" 0=""> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel="" 1=""> on atapci1
ata3: [ITHREAD]
pci0: <serial bus,="" SMBus=""> at device 31.3 (no driver attached)
acpi_button0: <Power Button=""> on acpi0
atkbdc0: <Keyboard controller="" (i8042)=""> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard=""> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
speaker0: <PC speaker=""> port 0x61 on acpi0
cpu0: <ACPI CPU=""> on acpi0
est0: <Enhanced SpeedStep="" Frequency="" Control=""> on cpu0
est0: Guessed bus clock (high) of 200 MHz
Fatal trap 18: integer divide fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0x80b6cc79
stack pointer = 0x28:0x86c3ea6c
frame pointer = 0x28:0x86c3ead8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 18
panic: integer divide fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p1 #0: Fri Jun 19 20:56:48 UTC 2009
root@vmbsd72i386:/usr/obj/freenas/usr/src/sys/FREENAS-i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 3455250432 (3295 MB)
avail memory = 3277864960 (3126 MB)
ACPI APIC Table: <INTEL D915GAV="">
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0 <Version 2.0=""> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <INTEL D915GAV=""> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cdf00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI="" bus=""> on pcib0
pcib1: <ACPI PCI-PCI="" bridge=""> at device 1.0 on pci0
pci1: <ACPI PCI="" bus=""> on pcib1
vgapci0: <VGA-compatible display=""> port 0xec00-0xec07 mem 0xff480000-0xff4fffff,0xd8000000-0xdfffffff,0xff440000-0xff47ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915G="" (915G="" GMCH)="" SVGA="" controller=""> on vgapci0
agp0: detected 32508k stolen memory
agp0: aperture size is 128M
pcib2: <ACPI PCI-PCI="" bridge=""> at device 28.0 on pci0
pci5: <ACPI PCI="" bus=""> on pcib2
pcib3: <ACPI PCI-PCI="" bridge=""> at device 28.1 on pci0
pci4: <ACPI PCI="" bus=""> on pcib3
pcib4: <ACPI PCI-PCI="" bridge=""> at device 28.2 on pci0
pci3: <ACPI PCI="" bus=""> on pcib4
pcib5: <ACPI PCI-PCI="" bridge=""> at device 28.3 on pci0
pci2: <ACPI PCI="" bus=""> on pcib5
uhci0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> port 0xc800-0xc81f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> mem 0xff43fc00-0xff43ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 2.00="" 1.00,="" addr="" 1=""> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI="" bridge=""> at device 30.0 on pci0
pci6: <ACPI PCI="" bus=""> on pcib6
em0: <Intel(R) PRO="" 1000="" Network="" Connection="" 6.9.6=""> port 0xbc00-0xbc3f mem 0xff500000-0xff51ffff,0xff520000-0xff53ffff irq 21 at device 0.0 on pci6
em0: [FILTER]
em0: Ethernet address: 00:0e:0c:b6:0d:b5
isab0: <PCI-ISA bridge=""> at device 31.0 on pci0
isa0: <ISA bus=""> on isab0
atapci0: <Intel ICH6="" UDMA100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel="" 0=""> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel="" 1=""> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6="" SATA150="" controller=""> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel="" 0=""> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel="" 1=""> on atapci1
ata3: [ITHREAD]
pci0: <serial bus,="" SMBus=""> at device 31.3 (no driver attached)
acpi_button0: <Power Button=""> on acpi0
atkbdc0: <Keyboard controller="" (i8042)=""> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard=""> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
speaker0: <PC speaker=""> port 0x61 on acpi0
cpu0: <ACPI CPU=""> on acpi0
acpi_perf0: <ACPI CPU="" Frequency="" Control=""> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU="" Frequency="" Control=""> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
est0: <Enhanced SpeedStep="" Frequency="" Control=""> on cpu0
est0: Guessed bus clock (high) of 200 MHz
Fatal trap 18: integer divide fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0x80b6cc79
stack pointer = 0x28:0x86c3ea6c
frame pointer = 0x28:0x86c3ead8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 18
panic: integer divide fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p1 #0: Fri Jun 19 20:56:48 UTC 2009
root@vmbsd72i386:/usr/obj/freenas/usr/src/sys/FREENAS-i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 3455250432 (3295 MB)
avail memory = 3277897728 (3126 MB)
MPTable: < Grantsdale-G>
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0=""> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
pcib0: <MPTable Host-PCI="" bridge=""> pcibus 0 on motherboard
pci0: <PCI bus=""> on pcib0
pcib1: <PCI-PCI bridge=""> at device 1.0 on pci0
pci1: <PCI bus=""> on pcib1
vgapci0: <VGA-compatible display=""> port 0xec00-0xec07 mem 0xff480000-0xff4fffff,0xd8000000-0xdfffffff,0xff440000-0xff47ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915G="" (915G="" GMCH)="" SVGA="" controller=""> on vgapci0
agp0: detected 32508k stolen memory
agp0: aperture size is 128M
pcib2: <PCI-PCI bridge=""> at device 28.0 on pci0
pci5: <PCI bus=""> on pcib2
pcib3: <PCI-PCI bridge=""> at device 28.1 on pci0
pci4: <PCI bus=""> on pcib3
pcib4: <PCI-PCI bridge=""> at device 28.2 on pci0
pci3: <PCI bus=""> on pcib4
pcib5: <PCI-PCI bridge=""> at device 28.3 on pci0
pci2: <PCI bus=""> on pcib5
uhci0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> port 0xc800-0xc81f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> mem 0xff43fc00-0xff43ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 2.00="" 1.00,="" addr="" 1=""> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib6: <MPTable PCI-PCI="" bridge=""> at device 30.0 on pci0
pci6: <PCI bus=""> on pcib6
em0: <Intel(R) PRO="" 1000="" Network="" Connection="" 6.9.6=""> port 0xbc00-0xbc3f mem 0xff500000-0xff51ffff,0xff520000-0xff53ffff irq 21 at device 0.0 on pci6
em0: [FILTER]
em0: Ethernet address: 00:0e:0c:b6:0d:b5
isab0: <PCI-ISA bridge=""> at device 31.0 on pci0
isa0: <ISA bus=""> on isab0
atapci0: <Intel ICH6="" UDMA100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel="" 0=""> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel="" 1=""> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6="" SATA150="" controller=""> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel="" 0=""> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel="" 1=""> on atapci1
ata3: [ITHREAD]
pci0: <serial bus,="" SMBus=""> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: <Enhanced SpeedStep="" Frequency="" Control=""> on cpu0
est0: Guessed bus clock (high) of 200 MHz
Fatal trap 18: integer divide fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0x80b6cc79
stack pointer = 0x28:0x86c3eb80
frame pointer = 0x28:0x86c3ebec
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 18
panic: integer divide fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p1 #0: Fri Jun 19 20:56:48 UTC 2009
root@vmbsd72i386:/usr/obj/freenas/usr/src/sys/FREENAS-i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 3455250432 (3295 MB)
avail memory = 3277864960 (3126 MB)
ACPI APIC Table: <INTEL D915GAV="">
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
ioapic0 <Version 2.0=""> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
acpi0: <INTEL D915GAV=""> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cdf00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI="" bus=""> on pcib0
pcib1: <ACPI PCI-PCI="" bridge=""> at device 1.0 on pci0
pci1: <ACPI PCI="" bus=""> on pcib1
vgapci0: <VGA-compatible display=""> port 0xec00-0xec07 mem 0xff480000-0xff4fffff,0xd8000000-0xdfffffff,0xff440000-0xff47ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915G="" (915G="" GMCH)="" SVGA="" controller=""> on vgapci0
agp0: detected 32508k stolen memory
agp0: aperture size is 128M
pcib2: <ACPI PCI-PCI="" bridge=""> at device 28.0 on pci0
pci5: <ACPI PCI="" bus=""> on pcib2
pcib3: <ACPI PCI-PCI="" bridge=""> at device 28.1 on pci0
pci4: <ACPI PCI="" bus=""> on pcib3
pcib4: <ACPI PCI-PCI="" bridge=""> at device 28.2 on pci0
pci3: <ACPI PCI="" bus=""> on pcib4
pcib5: <ACPI PCI-PCI="" bridge=""> at device 28.3 on pci0
pci2: <ACPI PCI="" bus=""> on pcib5
uhci0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> port 0xc800-0xc81f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> mem 0xff43fc00-0xff43ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 2.00="" 1.00,="" addr="" 1=""> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI="" bridge=""> at device 30.0 on pci0
pci6: <ACPI PCI="" bus=""> on pcib6
em0: <Intel(R) PRO="" 1000="" Network="" Connection="" 6.9.6=""> port 0xbc00-0xbc3f mem 0xff500000-0xff51ffff,0xff520000-0xff53ffff irq 21 at device 0.0 on pci6
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p1 #0: Fri Jun 19 20:56:48 UTC 2009
root@vmbsd72i386:/usr/obj/freenas/usr/src/sys/FREENAS-i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 3455250432 (3295 MB)
avail memory = 3277897728 (3126 MB)
MPTable: < Grantsdale-G>
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0=""> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto=""> on motherboard
padlock0: No ACE support.
pcib0: <MPTable Host-PCI="" bridge=""> pcibus 0 on motherboard
pci0: <PCI bus=""> on pcib0
pcib1: <PCI-PCI bridge=""> at device 1.0 on pci0
pci1: <PCI bus=""> on pcib1
vgapci0: <VGA-compatible display=""> port 0xec00-0xec07 mem 0xff480000-0xff4fffff,0xd8000000-0xdfffffff,0xff440000-0xff47ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82915G="" (915G="" GMCH)="" SVGA="" controller=""> on vgapci0
agp0: detected 32508k stolen memory
agp0: aperture size is 128M
pcib2: <PCI-PCI bridge=""> at device 28.0 on pci0
pci5: <PCI bus=""> on pcib2
pcib3: <PCI-PCI bridge=""> at device 28.1 on pci0
pci4: <PCI bus=""> on pcib3
pcib4: <PCI-PCI bridge=""> at device 28.2 on pci0
pci3: <PCI bus=""> on pcib4
pcib5: <PCI-PCI bridge=""> at device 28.3 on pci0
pci2: <PCI bus=""> on pcib5
uhci0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> port 0xc800-0xc81f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 1.00="" 1.00,="" addr="" 1=""> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> mem 0xff43fc00-0xff43ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI="" root="" hub,="" class="" 9="" 0,="" rev="" 2.00="" 1.00,="" addr="" 1=""> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib6: <MPTable PCI-PCI="" bridge=""> at device 30.0 on pci0
pci6: <PCI bus=""> on pcib6
em0: <Intel(R) PRO="" 1000="" Network="" Connection="" 6.9.6=""> port 0xbc00-0xbc3f mem 0xff500000-0xff51ffff,0xff520000-0xff53ffff irq 21 at device 0.0 on pci6
em0: [FILTER]
em0: Ethernet address: 00:0e:0c:b6:0d:b5
isab0: <PCI-ISA bridge=""> at device 31.0 on pci0
isa0: <ISA bus=""> on isab0
atapci0: <Intel ICH6="" UDMA100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel="" 0=""> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel="" 1=""> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6="" SATA150="" controller=""> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel="" 0=""> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel="" 1=""> on atapci1
ata3: [ITHREAD]
pci0: <serial bus,="" SMBus=""> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: <Enhanced SpeedStep="" Frequency="" Control=""> on cpu0
est0: Guessed bus clock (high) of 200 MHz
Fatal trap 18: integer divide fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0x80b6cc79
stack pointer = 0x28:0x86c3eb80
frame pointer = 0x28:0x86c3ebec
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 18
panic: integer divide fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.4-RELEASE-p5 #0: Wed Jun 10 23:45:29 UTC 2009
root@vmbsd64i386:/usr/obj/freenas/usr/src/sys/FREENAS-i386
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.00-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
Logical CPUs per core: 2
real memory = 3455250432 (3295 MB)
avail memory = 3292889088 (3140 MB)
ACPI APIC Table: <INTEL D915GAV="">
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0=""> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
PadLock: No ACE support.
module_register_init: MOD_LOAD (padlock, 0xc09386fc, 0) error 22
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jun 10 2009 23:45:17)
acpi0: <INTEL D915GAV=""> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU=""> on acpi0
acpi_perf0: <ACPI CPU="" Frequency="" Control=""> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
est0: <Enhanced SpeedStep="" Frequency="" Control=""> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102b0000102b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency="" Thermal="" Control=""> on cpu0
acpi_perf0: <ACPI CPU="" Frequency="" Control=""> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
cpu1: <ACPI CPU=""> on acpi0
acpi_perf1: <ACPI CPU="" Frequency="" Control=""> on cpu1
acpi_perf1: failed in PERF_STATUS attach
device_attach: acpi_perf1 attach returned 6
est1: <Enhanced SpeedStep="" Frequency="" Control=""> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 102b0000102b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency="" Thermal="" Control=""> on cpu1
acpi_perf1: <ACPI CPU="" Frequency="" Control=""> on cpu1
acpi_perf1: failed in PERF_STATUS attach
device_attach: acpi_perf1 attach returned 6
pcib0: <ACPI Host-PCI="" bridge=""> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI="" bus=""> on pcib0
pcib1: <ACPI PCI-PCI="" bridge=""> at device 1.0 on pci0
pci1: <ACPI PCI="" bus=""> on pcib1
agp0: <Intel 82915G="" (915G="" GMCH)="" SVGA="" controller=""> port 0xec00-0xec07 mem 0xff480000-0xff4fffff,0xd8000000-0xdfffffff,0xff440000-0xff47ffff irq 16 at device 2.0 on pci0
agp0: detected 32508k stolen memory
agp0: aperture size is 128M
pcib2: <ACPI PCI-PCI="" bridge=""> at device 28.0 on pci0
pci5: <ACPI PCI="" bus=""> on pcib2
pcib3: <ACPI PCI-PCI="" bridge=""> at device 28.1 on pci0
pci4: <ACPI PCI="" bus=""> on pcib3
pcib4: <ACPI PCI-PCI="" bridge=""> at device 28.2 on pci0
pci3: <ACPI PCI="" bus=""> on pcib4
pcib5: <ACPI PCI-PCI="" bridge=""> at device 28.3 on pci0
pci2: <ACPI PCI="" bus=""> on pcib5
uhci0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> port 0xc800-0xc81f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-A=""> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> port 0xcc00-0xcc1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-B=""> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> port 0xd000-0xd01f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-C=""> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB="" FR="" FW="" FRW="" (ICH6)="" USB="" controller="" USB-D=""> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> mem 0xff43fc00-0xff43ffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB="" (ICH6)="" USB="" 2.0="" controller=""> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI="" bridge=""> at device 30.0 on pci0
pci6: <ACPI PCI="" bus=""> on pcib6
em0: <Intel(R) PRO="" 1000="" Network="" Connection="" Version="" -="" 6.7.3=""> port 0xbc00-0xbc3f mem 0xff500000-0xff51ffff,0xff520000-0xff53ffff irq 21 at device 0.0 on pci6
em0: Ethernet address: 00:0e:0c:b6:0d:b5
isab0: <PCI-ISA bridge=""> at device 31.0 on pci0
isa0: <ISA bus=""> on isab0
atapci0: <Intel ICH6="" UDMA100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel="" 0=""> on atapci0
ata1: <ATA channel="" 1=""> on atapci0
atapci1: <Intel ICH6="" SATA150="" controller=""> port 0xe800-0xe807,0xe400-0xe403,0xe000-0xe007,0xdc00-0xdc03,0xd800-0xd80f irq 19 at device 31.2 on pci0
ata2: <ATA channel="" 0=""> on atapci1
ata3: <ATA channel="" 1=""> on atapci1
pci0: <serial bus,="" SMBus=""> at device 31.3 (no driver attached)
acpi_button0: <Power Button=""> on acpi0
atkbdc0: <Keyboard controller="" (i8042)=""> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard=""> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
speaker0: <PC speaker=""> port 0x61 on acpi0
pmtimer0 on isa0
orm0: <ISA Option="" ROMs=""> at iomem 0xcb000-0xcbfff,0xcc000-0xccfff on isa0
ppc0: parallel port not found.
sc0: <System console=""> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA="" VGA=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: CHESEN USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1
kbd2 at ukbd0
uhid0: CHESEN USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 5 packets/entry
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging limited to 5 packets/entry by default
hptrr: no controller detected.
md0: Preloaded image </mfsroot> 83886080 bytes at 0xc0c4373c
acd0: DVDROM <IDE-DVD ROM="" 6116="" DD04=""> at ata0-slave UDMA33
ad4: 238475MB <Seagate ST3250624NS="" 3.AEH=""> at ata2-master SATA150
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider acd0 is iso9660/FreeNAS-i386-LiveCD-0.69.2.
GEOM_LABEL: Label for provider ad4p1 is msdosfs/EFI.
Trying to mount root from ufs:/dev/md0
em0: link state changed to UP
em0: link state changed to DOWN
em0: link state changed to UP
GEOM_LABEL: Label msdosfs/EFI removed.
GEOM_LABEL: Label for provider ad4p1 is ufs/S250B.
GEOM_LABEL: Label ufs/S250B removed.
View and moderate all "bugs Discussion" comments posted by this user
Mark all as spam, and block user from posting to "Bugs"
Tried to disable onboard IDE/SATA controller and boot with SATA DVD-ROM and same harddrive connected to a Sil3132 PCI-Ex16 controller. Same result.