#312 MP and WebGUI issues

[joe007noah]

0.686.1 (revision 2635)
Clean install Full

Issues
-on the Status:System page only two of my three drives show
Only the 80 and 250 show, see below

-On reboot Disks:Mount Points two error show because they have swapped physical drives. When I make the correction all is fine.
so after a reboot the /mnt/250 shows the 750 hdd and the /mnt/250 shows the 750 hdd. I correct and try again and it works.

df -h shows the following
/dev/ad0s1a 496M 55M 401M 12% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/ad0s2 72G -44M 66G -0% /mnt/80
/dev/da1p1 226G 81G 128G 39% /mnt/250
/dev/fuse0 699G 167G 532G 24% /mnt/750

[Dan Merschi]

Logged In: YES
user_id=1512153
Originator: NO

Hi Joe
I can't see any bug's on your case.
Please use the Help Forum to identify and correct your problem.

Regards,
Dan

[SourceForge Robot]

Logged In: YES
user_id=1312539
Originator: NO

This Tracker item was closed automatically by the system. It was
previously set to a Pending status, and the original submitter
did not respond within 14 days (the time period specified by
the administrator of this Tracker).