USB install - no boot/loader
This project has moved to github - see https://github.com/freenas
Brought to you by:
cochard,
mattolander
boot from USB doesn't work with version 0.68 and 0.685b.
version 0.671 install is OK - boots from USB stick
version 0.684b install results in error
"gunzip: stdout: Broken pipe" see also [ 1705105 ]
booting from CD - OK
Installation procedure - passed with no errors
removing disk and rebooting.
Booting from USB stick not possible.
the following error message occured.
error 1 lba 43968
No boot/loader
followed by an similar no kernel error.
Version 0.671 installation procedure is about 10 sec while the version 0.68 about 1 minute.
regards Wolfgang
(I stay with version 0.671 which fits my needs)
Logged In: YES
user_id=1859180
Originator: NO
Same problem here on a AMD Geode NX1750/PCChips 848A system:
installation on USB without any error messages,
Booting produces the error mentioned above.....
But.......
When I try to boot my Dell Lattitude D610 from the USB stick installed on the AMD Geode system, it boots fine :?
Logged In: YES
user_id=357602
Originator: NO
Did you set up your BIOS to boot from USB? I'm not familiar with your system, but make sure your BIOS supports it.