Menu

#2200 FG1000 MFD & PFD

2019.2
Fixed
None
Medium
2020-04-08
2020-04-08
No

As discussed once either PFD or MFD are activated from debug it correctly shows flight data (IDG PA28). Then if you close either panel on re-opening whilst the data remains neither are active except comms and nav radios even if it is the same flight. Also the Nav radios are back to front assuming active radio should be in the blue box, the active Nav should be on the left.

Related

Tickets: #2200

Discussion

  • Stuart Buchanan

    Stuart Buchanan - 2020-04-08

    Hi Robert,

    Thanks for the bug report. I've just pushed an initial fix for this.

    I've also double-checked the Nav and Com radio positions against the G1000 manual. The blue box is the inactive radio, which is the one that you can edit. So I think that is correct.

    -Stuart

     
    • Robert Feal-Martinez

      I will take a look now. I only mentioned the Nav Radio because most radio
      stacks to standby is the right hand frequency.
      Thanks
      Robert Feal-Martinez
      35 Rosneath Castle Caravan Park
      Rosneath
      Helensburgh
      G840QS
      01436831455

      On Wed, 8 Apr 2020 at 20:19, Stuart Buchanan stuartbuchanan@users.sourceforge.net wrote:

      Hi Robert,

      Thanks for the bug report. I've just pushed an initial fix for this.

      I've also double-checked the Nav and Com radio positions against the G1000
      manual. The blue box is the inactive radio, which is the one that you can
      edit. So I think that is correct.

      -Stuart

      Status: New
      Milestone: 2019.2
      Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
      Last Updated: Wed Apr 08, 2020 03:40 PM UTC
      Owner: Stuart Buchanan

      As discussed once either PFD or MFD are activated from debug it correctly
      shows flight data (IDG PA28). Then if you close either panel on re-opening
      whilst the data remains neither are active except comms and nav radios even
      if it is the same flight. Also the Nav radios are back to front assuming
      active radio should be in the blue box, the active Nav should be on the
      left.


      Sent from sourceforge.net because you indicated interest in
      https://sourceforge.net/p/flightgear/codetickets/2200/

      To unsubscribe from further messages, please visit
      https://sourceforge.net/auth/subscriptions/

       

      Related

      Tickets: #2200

      • Robert Feal-Martinez

        Will any fix only activate when I exit and reload the sim as I just checked
        and it's the same.
        Robert Feal-Martinez
        35 Rosneath Castle Caravan Park
        Rosneath
        Helensburgh
        G840QS
        01436831455

        On Wed, 8 Apr 2020 at 20:27, Robert Feal-Martinez robertfm@users.sourceforge.net wrote:

        I will take a look now. I only mentioned the Nav Radio because most radio
        stacks to standby is the right hand frequency.
        Thanks
        Robert Feal-Martinez
        35 Rosneath Castle Caravan Park
        Rosneath
        Helensburgh
        G840QS
        01436831455

        On Wed, 8 Apr 2020 at 20:19, Stuart Buchanan
        stuartbuchanan@users.sourceforge.net
        %0Dstuartbuchanan@users.sourceforge.net wrote:

        Hi Robert,

        Thanks for the bug report. I've just pushed an initial fix for this.

        I've also double-checked the Nav and Com radio positions against the G1000
        manual. The blue box is the inactive radio, which is the one that you can
        edit. So I think that is correct.
        -Stuart

        Status: New
        Milestone: 2019.2
        Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
        Last Updated: Wed Apr 08, 2020 03:40 PM UTC
        Owner: Stuart Buchanan

        As discussed once either PFD or MFD are activated from debug it correctly
        shows flight data (IDG PA28). Then if you close either panel on re-opening
        whilst the data remains neither are active except comms and nav radios even
        if it is the same flight. Also the Nav radios are back to front assuming
        active radio should be in the blue box, the active Nav should be on the
        left.


        Sent from sourceforge.net because you indicated interest in
        https://sourceforge.net/p/flightgear/codetickets/2200/

        To unsubscribe from further messages, please visit
        https://sourceforge.net/auth/subscriptions/


        Status: Fixed
        Milestone: 2019.2
        Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
        Last Updated: Wed Apr 08, 2020 07:19 PM UTC
        Owner: Stuart Buchanan

        As discussed once either PFD or MFD are activated from debug it correctly
        shows flight data (IDG PA28). Then if you close either panel on re-opening
        whilst the data remains neither are active except comms and nav radios even
        if it is the same flight. Also the Nav radios are back to front assuming
        active radio should be in the blue box, the active Nav should be on the
        left.


        Sent from sourceforge.net because you indicated interest in
        https://sourceforge.net/p/flightgear/codetickets/2200/

        To unsubscribe from further messages, please visit
        https://sourceforge.net/auth/subscriptions/

         

        Related

        Tickets: #2200

        • Stuart Buchanan

          Stuart Buchanan - 2020-04-09

          Hi Robert,

          I should have been clearer - the fix is in the codebase, so unless you're
          running what we call "next" and update fgdata from git, you won't see the
          fix until the 2020.1 release is made. If those terms don't mean anything
          to you, then don't worry about it, and just wait until the 2020.1 release
          which we'll be making in the next month or so :)

          If you're in a hurry and, know your way around XML and editing text, you
          can try to fix it yourself - here's a link to the change I made to fix it:
          https://sourceforge.net/p/flightgear/fgdata/ci/7605fee09fe92ac9481ddcc490f464e44288b405/

          However, only attempt this if you're confident, and be aware that getting
          it wrong will probably break the GUI and require you to re-install
          flightgear. On a more positive note, messing around with the internals of
          flightgear is one of the great things about the simulator :)

          -Stuart

          On Wed, Apr 8, 2020 at 8:36 PM Robert Feal-Martinez robertfm@users.sourceforge.net wrote:

          Will any fix only activate when I exit and reload the sim as I just checked
          and it's the same.
          Robert Feal-Martinez
          35 Rosneath Castle Caravan Park
          Rosneath
          Helensburgh
          G840QS
          01436831455

          On Wed, 8 Apr 2020 at 20:27, Robert Feal-Martinez
          robertfm@users.sourceforge.net %0Drobertfm@users.sourceforge.net wrote:

          I will take a look now. I only mentioned the Nav Radio because most radio
          stacks to standby is the right hand frequency.
          Thanks
          Robert Feal-Martinez
          35 Rosneath Castle Caravan Park
          Rosneath
          Helensburgh
          G840QS
          01436831455

          On Wed, 8 Apr 2020 at 20:19, Stuart Buchanan
          stuartbuchanan@users.sourceforge.net
          %0Dstuartbuchanan@users.sourceforge.net wrote:

          Hi Robert,

          Thanks for the bug report. I've just pushed an initial fix for this.

          I've also double-checked the Nav and Com radio positions against the G1000
          manual. The blue box is the inactive radio, which is the one that you can
          edit. So I think that is correct.
          -Stuart

          Status: New
          Milestone: 2019.2
          Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
          Last Updated: Wed Apr 08, 2020 03:40 PM UTC
          Owner: Stuart Buchanan

          As discussed once either PFD or MFD are activated from debug it correctly
          shows flight data (IDG PA28). Then if you close either panel on re-opening
          whilst the data remains neither are active except comms and nav radios even
          if it is the same flight. Also the Nav radios are back to front assuming
          active radio should be in the blue box, the active Nav should be on the
          left.


          Sent from sourceforge.net because you indicated interest in
          https://sourceforge.net/p/flightgear/codetickets/2200/

          To unsubscribe from further messages, please visit
          https://sourceforge.net/auth/subscriptions/


          Status: Fixed
          Milestone: 2019.2
          Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
          Last Updated: Wed Apr 08, 2020 07:19 PM UTC
          Owner: Stuart Buchanan

          As discussed once either PFD or MFD are activated from debug it correctly
          shows flight data (IDG PA28). Then if you close either panel on re-opening
          whilst the data remains neither are active except comms and nav radios even
          if it is the same flight. Also the Nav radios are back to front assuming
          active radio should be in the blue box, the active Nav should be on the
          left.


          Sent from sourceforge.net because you indicated interest in
          https://sourceforge.net/p/flightgear/codetickets/2200/

          To unsubscribe from further messages, please visit
          https://sourceforge.net/auth/subscriptions/


          Status: Fixed
          Milestone: 2019.2
          Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
          Last Updated: Wed Apr 08, 2020 07:19 PM UTC
          Owner: Stuart Buchanan

          As discussed once either PFD or MFD are activated from debug it correctly
          shows flight data (IDG PA28). Then if you close either panel on re-opening
          whilst the data remains neither are active except comms and nav radios even
          if it is the same flight. Also the Nav radios are back to front assuming
          active radio should be in the blue box, the active Nav should be on the
          left.


          Sent from sourceforge.net because you indicated interest in
          https://sourceforge.net/p/flightgear/codetickets/2200/

          To unsubscribe from further messages, please visit
          https://sourceforge.net/auth/subscriptions/

           

          Related

          Tickets: #2200

          • Robert Feal-Martinez

            Thanks for the update. I think I will wait. Whilst I have changed code but
            in those cases I was told exactly where to put it.

            Robert Feal-Martinez
            35 Rosneath Castle Caravan Park
            Rosneath
            Helensburgh
            G840QS
            01436831455

            On Thu, 9 Apr 2020 at 09:37, Stuart Buchanan stuartbuchanan@users.sourceforge.net wrote:

            Hi Robert,

            I should have been clearer - the fix is in the codebase, so unless you're
            running what we call "next" and update fgdata from git, you won't see the
            fix until the 2020.1 release is made. If those terms don't mean anything
            to you, then don't worry about it, and just wait until the 2020.1 release
            which we'll be making in the next month or so :)

            If you're in a hurry and, know your way around XML and editing text, you
            can try to fix it yourself - here's a link to the change I made to fix it:

            https://sourceforge.net/p/flightgear/fgdata/ci/7605fee09fe92ac9481ddcc490f464e44288b405/

            However, only attempt this if you're confident, and be aware that getting
            it wrong will probably break the GUI and require you to re-install
            flightgear. On a more positive note, messing around with the internals of
            flightgear is one of the great things about the simulator :)

            -Stuart

            On Wed, Apr 8, 2020 at 8:36 PM Robert Feal-Martinez
            robertfm@users.sourceforge.net %0Drobertfm@users.sourceforge.net wrote:

            Will any fix only activate when I exit and reload the sim as I just checked
            and it's the same.
            Robert Feal-Martinez
            35 Rosneath Castle Caravan Park
            Rosneath
            Helensburgh
            G840QS
            01436831455

            On Wed, 8 Apr 2020 at 20:27, Robert Feal-Martinez
            robertfm@users.sourceforge.net %0Drobertfm@users.sourceforge.net wrote:

            I will take a look now. I only mentioned the Nav Radio because most radio
            stacks to standby is the right hand frequency.
            Thanks
            Robert Feal-Martinez
            35 Rosneath Castle Caravan Park
            Rosneath
            Helensburgh
            G840QS
            01436831455

            On Wed, 8 Apr 2020 at 20:19, Stuart Buchanan
            stuartbuchanan@users.sourceforge.net
            %0Dstuartbuchanan@users.sourceforge.net wrote:

            Hi Robert,

            Thanks for the bug report. I've just pushed an initial fix for this.

            I've also double-checked the Nav and Com radio positions against the G1000
            manual. The blue box is the inactive radio, which is the one that you can
            edit. So I think that is correct.
            -Stuart

            Status: New
            Milestone: 2019.2
            Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
            Last Updated: Wed Apr 08, 2020 03:40 PM UTC
            Owner: Stuart Buchanan

            As discussed once either PFD or MFD are activated from debug it correctly
            shows flight data (IDG PA28). Then if you close either panel on re-opening
            whilst the data remains neither are active except comms and nav radios even
            if it is the same flight. Also the Nav radios are back to front assuming
            active radio should be in the blue box, the active Nav should be on the
            left.


            Sent from sourceforge.net because you indicated interest in
            https://sourceforge.net/p/flightgear/codetickets/2200/

            To unsubscribe from further messages, please visit
            https://sourceforge.net/auth/subscriptions/


            Status: Fixed
            Milestone: 2019.2
            Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
            Last Updated: Wed Apr 08, 2020 07:19 PM UTC
            Owner: Stuart Buchanan

            As discussed once either PFD or MFD are activated from debug it correctly
            shows flight data (IDG PA28). Then if you close either panel on re-opening
            whilst the data remains neither are active except comms and nav radios even
            if it is the same flight. Also the Nav radios are back to front assuming
            active radio should be in the blue box, the active Nav should be on the
            left.


            Sent from sourceforge.net because you indicated interest in
            https://sourceforge.net/p/flightgear/codetickets/2200/

            To unsubscribe from further messages, please visit
            https://sourceforge.net/auth/subscriptions/


            Status: Fixed
            Milestone: 2019.2
            Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
            Last Updated: Wed Apr 08, 2020 07:19 PM UTC
            Owner: Stuart Buchanan

            As discussed once either PFD or MFD are activated from debug it correctly
            shows flight data (IDG PA28). Then if you close either panel on re-opening
            whilst the data remains neither are active except comms and nav radios even
            if it is the same flight. Also the Nav radios are back to front assuming
            active radio should be in the blue box, the active Nav should be on the
            left.


            Sent from sourceforge.net because you indicated interest in
            https://sourceforge.net/p/flightgear/codetickets/2200/

            To unsubscribe from further messages, please visit
            https://sourceforge.net/auth/subscriptions/


            Status: Fixed
            Milestone: 2019.2
            Created: Wed Apr 08, 2020 03:40 PM UTC by Robert Feal-Martinez
            Last Updated: Wed Apr 08, 2020 07:19 PM UTC
            Owner: Stuart Buchanan

            As discussed once either PFD or MFD are activated from debug it correctly
            shows flight data (IDG PA28). Then if you close either panel on re-opening
            whilst the data remains neither are active except comms and nav radios even
            if it is the same flight. Also the Nav radios are back to front assuming
            active radio should be in the blue box, the active Nav should be on the
            left.


            Sent from sourceforge.net because you indicated interest in
            https://sourceforge.net/p/flightgear/codetickets/2200/

            To unsubscribe from further messages, please visit
            https://sourceforge.net/auth/subscriptions/

             

            Related

            Tickets: #2200

  • Stuart Buchanan

    Stuart Buchanan - 2020-04-08
    • status: New --> Fixed
     

Log in to post a comment.

MongoDB Logo MongoDB