Re: [Flashforth-devel] Question about running FlashForth on Arduino Diecimila
Brought to you by:
oh2aun
From: Aymeric <ult...@bl...> - 2017-09-01 21:47:26
|
(sorry used wrong email to send my reply) Hello Mikael, thanks for the quick reply! Mikael Nordman said : > How did you set the fuses ? That is the first thing to check. > The fuses must be set to BOOTSIZE=1024 words and the BOOTRESET should be > active. > > [..] > > I think these fuses should work for the 168. > > avrdude -p m168 -c usbtiny -e -u -U flash:w:ff-atmega.hex:i -U > efuse:w:0xf8:m -U hfuse:w:0xff:m -U lfuse:w:0xff:m I cannot set SPIEN to 0 on this board, so I used this: -U lfuse:w:0xFF:m -U hfuse:w:0xDF:m -U efuse:w:0xF8:m Unfortunately I still do not get anything when I try to connect with screen. Aymeric. |