[Flashforth-devel] problem controlling pins RA4 and RB4 on PIC24FV16KM202

[Peter J. <pe...@me...>]

Mike,
    I've not had much luck using pins RA4 and RB4 on a 
PIC24FV16KM202-I/SP from within FlashForth 5.0.  I've failed for both 
digital input and output.  Attached is an example that fails to control 
RA4 and RB4, but drives RB15 just fine.  Also, I've attached a C code 
that works the very same pins, so I'm reasonably sure that the MCU 
itself is fine.  Any hints for things that I should try with the 
configuration of FF, or should I look deeper within the assembly code 
for FF?
Regards,
Peter J.