Re: [Flashforth-devel] FF 5.0 onto Arduino Mega 2560

[craig b. <dab...@ya...>]

Thanks for the info, Mike.  I was able to latch onto an AVRISP-mkII that solved my code migration problem.  I have no clue why the USB-Serial bridge doesn't want to work, it did just fine with the Arduino demos.  I hung a home-brew RS232 converter on the Tx0 and Rx0 pins and my 15.11.2013 build burn seems to work ok.  


Is there a reason that the 5.0 source is set for 8Mhz xtal while the v4.8 code uses 16Mhz?  I used 16 because that's what I read on the top of the xtal-can.

Thanks again, craig

 
...averaging may or may not help clarify data. 
       If Bill Gates walks into a bar, 
   the average patron becomes a millionaire...