[Flashforth-devel] FF 5.0 and dsPIC30F4012

[Pete Z. <pza...@pz...>]

Hi Mikael and all,

Testing is looking good here as far as FF 5.0 and the dsPIC30F4012 .
I have used both  MPLAB 8.92 and MPLAB X ver2.05 to assemble 
ff-pic24-30-33.s .

At first, I still had the WDT ON as I have had in FF 4.8 but now with 
WDT OFF, all is well and testing progresses.

  Configuration is:
                16-BIT 28P STARTER DEMO BOARD DM300027
                  with dsPIC30F4012                          bytes words
                         SFR          0x0000 to 0x07ff          2K
                         RAM         0x0800 to 0x0fff           2K
                         FLASH     0x1000 to 0xcfff          48K 16K
                         EEPROM 0xfc00 to 0xffff              1K
                         UART1 on Port F <RF3,RF2>
                         system clock -- 7.3728MHz xtal and 8xPLL
                         Fcy is 14745600 Hz

Anything specific you want me to focus on for this set up?

Pete