[Flashforth-devel] FlashForth V3.6 PIC18F4550

[R. M. H. <in...@ib...>]

Hello Mikael,

here the experience with the new ff18_361 in
the last weeks. After installation in the
pic18f4550 of the active projekt, it was
very busy to grow my working code. Some
hundred bytes of flash are seen as rest
of storage. At this time, there was absolutly
no error to see, except those of my own.
I am very glad to meet this wunderfull
piece of software. Congratulations to you!

One remark yet. As a german, I can't write
without “Umlaute äüö..” in a normal text.
In source code, file names and so on it is
forbidden for me, because RT11, CP/M...
doesn't like it. But in comments, it always
happened to me, still to use them. So with
XO/XOFF in the serial two line (I am very
happy to have only two lines) you should
strongly recommend “use plain ASCII”, because
there are transmission errors and the
question marks in consecution will have
no clear meaning to the actual place of
appearance.

With a lot of thanks and best wishes for
you just out of the Eifel. Spring is on the
way. The cranes on the way since last week.

Gruss - Robert