flashforth-devel

[Flashforth-devel] turnkey on pic24

[Peter J. <pe...@me...>]

Mikael,
    I have a pressure monitoring program for a small wind tunnel that is 
running nicely on a PIC24FV32KA301.  Now, I want to make it start at 
power up but the turnkey vector does not seem to be working.

chan 1 0.0 Pa chan 2 480.2 Pa
chan 1 0.0 Pa chan 2 480.2 Pa
chan 1 0.0 Pa chan 2 480.2 Pa ok<#,ram>
  main
chan 1 0.0 Pa chan 2 480.2 Pa
chan 1 0.0 Pa chan 2 480.2 Pa
chan 1 0.0 Pa chan 2 480.2 Pa
chan 1 0.0 Pa chan 2 480.2 Pa ok<#,ram>
  ' main is turnkey  ok<#,ram>
S FlashForth PIC24 03.09.2015

   ok<#,ram>
   ok<#,ram>

Suggestions?

Regards,
Peter Jacobs

Re: [Flashforth-devel] turnkey on pic24

[Mikael N. <mik...@fl...>]

There seems to be some problem with WRITE_METHOD 2, it writes to EEPROM 
but after a long delay.

Try using WRITE_METHOD 1 setting in the config file.
Works for me on a PIC24FV32KA302.

BR Mikael

Re: [Flashforth-devel] turnkey on pic24

[Peter J. <pe...@me...>]

Thank you.  Your suggestion worked nicely.

chan 1 0.0 Pa chan 2 88.2 Pa ok<#,ram>
    ok<#,ram>
' main is turnkey  ok<#,ram>
   ok<#,ram>
   ok<#,ram>
   ok<#,ram>
S FlashForth PIC24 03.09.2015
ESC
chan 1 0.0 Pa chan 2 88.2 Pa
chan 1 0.0 Pa chan 2 88.2 Pa
chan 1 0.0 Pa chan 2 88.2 Pa
chan 1 0.0 Pa chan 2 88.2 Pa
chan 1 0.0 Pa chan 2 88.2 Pa
chan 1 0.0 Pa chan 2 88.2 Pa
chan 1 0.0 Pa chan 2 88.2 Pa

Cheers,
Peter J.


On 13/10/15 15:06, Mikael Nordman wrote:
> There seems to be some problem with WRITE_METHOD 2, it writes to EEPROM
> but after a long delay.
>
> Try using WRITE_METHOD 1 setting in the config file.
> Works for me on a PIC24FV32KA302.
>
> BR Mikael
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Flashforth-devel mailing list
> Fla...@li...
> https://lists.sourceforge.net/lists/listinfo/flashforth-devel