flashforth-devel

[Flashforth-devel] flashforth arduino duemilanove

[Sven <sve...@ya...>]

Hi,
I've downloaded flashforth V3.8 for the Atmega and because I only have Linux on my PC, I assembeled it with AVR Studio V4.17.666 ( That's the only version I got to run with wine ). I got no errors and after checking and changing the fuses, like the recommendation, to: lfuse: 0xFF, hfuse:0xDA, efuse:0xFD
I downloaded the hex file via ISP to the arduino board. After I started minicom (38400 8N1, Software handshake) and pressing the reset button I got: FlashForth Atmega 18.11.2012
Then I typed in 1 [cr] 1 [cr] 1 [cr] .s [cr] and got: 0 0 0 0 0  ok
If I tried the same with "2", there is no input possible anymore after pressing CR. I could revive the flashforth with CTRL-o or by pressing the reset button.
If I type in "words" the only output I got is: ...............
 
I think there's something wrong with my flashforth system any idea what could be wrong ?
Is it perhaps the old AVR studio, which I used for assembling and is it possible to use another AVR assembler to build flashforth?

Sven

     

Re: [Flashforth-devel] flashforth arduino duemilanove

[Mikael N. <mik...@pp...>]

Hi Sven,
My guess is that you forgot to program the eeprom.

BR Mikael

On 06/12/2013 02:20 PM, Sven wrote:
> Hi,
> I've downloaded flashforth V3.8 for the Atmega and because I only have Linux on my PC, I assembeled it with AVR Studio V4.17.666 ( That's the only version I got to run with wine ). I got no errors and after checking and changing the fuses, like the recommendation, to: lfuse: 0xFF, hfuse:0xDA, efuse:0xFD
> I downloaded the hex file via ISP to the arduino board. After I started minicom (38400 8N1, Software handshake) and pressing the reset button I got: FlashForth Atmega 18.11.2012
> Then I typed in 1 [cr] 1 [cr] 1 [cr] .s [cr] and got: 0 0 0 0 0  ok
> If I tried the same with "2", there is no input possible anymore after pressing CR. I could revive the flashforth with CTRL-o or by pressing the reset button.
> If I type in "words" the only output I got is: ...............
>   
> I think there's something wrong with my flashforth system any idea what could be wrong ?
> Is it perhaps the old AVR studio, which I used for assembling and is it possible to use another AVR assembler to build flashforth?
>
> Sven
>
>       
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Flashforth-devel mailing list
> Fla...@li...
> https://lists.sourceforge.net/lists/listinfo/flashforth-devel
>

Re: [Flashforth-devel] flashforth arduino duemilanove

[Mikael N. <mik...@pp...>]

I just remembered.
The easiest way to recover from faulty eeprom data
is to just give the command

empty

from the command line. It will reinitialize the eeprom to
default values.

BR Mike

On 06/12/2013 05:23 PM, Mikael Nordman wrote:
> Hi Sven,
> My guess is that you forgot to program the eeprom.
>
> BR Mikael
>
> On 06/12/2013 02:20 PM, Sven wrote:
>> Hi,
>> I've downloaded flashforth V3.8 for the Atmega and because I only have Linux on my PC, I assembeled it with AVR Studio V4.17.666 ( That's the only version I got to run with wine ). I got no errors and after checking and changing the fuses, like the recommendation, to: lfuse: 0xFF, hfuse:0xDA, efuse:0xFD
>> I downloaded the hex file via ISP to the arduino board. After I started minicom (38400 8N1, Software handshake) and pressing the reset button I got: FlashForth Atmega 18.11.2012
>> Then I typed in 1 [cr] 1 [cr] 1 [cr] .s [cr] and got: 0 0 0 0 0  ok
>> If I tried the same with "2", there is no input possible anymore after pressing CR. I could revive the flashforth with CTRL-o or by pressing the reset button.
>> If I type in "words" the only output I got is: ...............
>>    
>> I think there's something wrong with my flashforth system any idea what could be wrong ?
>> Is it perhaps the old AVR studio, which I used for assembling and is it possible to use another AVR assembler to build flashforth?
>>
>> Sven
>>
>>        
>>
>> ------------------------------------------------------------------------------
>> This SF.net email is sponsored by Windows:
>>
>> Build for Windows Store.
>>
>> http://p.sf.net/sfu/windows-dev2dev
>> _______________________________________________
>> Flashforth-devel mailing list
>> Fla...@li...
>> https://lists.sourceforge.net/lists/listinfo/flashforth-devel
>>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Flashforth-devel mailing list
> Fla...@li...
> https://lists.sourceforge.net/lists/listinfo/flashforth-devel
>