FF on 18F4550 Protoboard from Olimex

Brought to you by: oh2aun

FF on 18F4550 Protoboard from Olimex

Forum: Open Discussion

Creator: Mr. Hill

Created: 2012-11-19

Updated: 2012-11-22

Mr. Hill - 2012-11-19

Hi All.

I'm trying to get started with FF. I'm somewhat familiar with PICs but haven't been able to get FF running on my Olimex proto board.

http://www.olimex.com/Products/PIC/Proto/PIC-USB-4550/

I'm able to build the software and program the device without error.
When I plug in the USB cable I get the windows USB device malfunction warning.

I did modify line 32 of 'p18f2455-4455-4550.cfg' to read 'config PLLDIV = 5' since the olimex board has a 20 MHz crystal rather than a 12 MHz crystal.

Is there anything else I should try?

Thanks in advance!

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Pete Zawasky - 2012-11-19

Perhaps you can review a previous thread in the 'Mailing Lists'.
Look at 'flashforth-devel | archives'
"Re: [Flashforth-devel] flashforth on p18f4550 - No usb?" 2011-10-14

Pete

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Mikael Nordman - 2012-11-22

If you disable the IDLE_MODE in the configuration file it should work.
I fixed this yesterday in the GIT repository so that the IDLE_MODE
is disabled in the configuration file.
I will also make a new archive for download.

BR Mike

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.