Re: [Firestarter-user] Dedicated Firewall
Brought to you by:
majix
From: Ryan <ry...@zo...> - 2005-10-25 02:28:08
|
On Monday 24 October 2005 06:59 pm, Chris Pfeffer wrote: > Does anyone have instructions on how to setup Firestarter as a dedicated > firewall? > > Chris > > You need: -A supported Linux distro (Red-Hat, Debian, etc) -2 Ethernet cards -A hub or switch if you want to connect more than 2 PCs -The dhcpd package if you want DHCP on your LAN 1. COnfigure your Ethernet cards. If you have a cable modem, eth0 is usually DHCP (WAN) and set the LAN to be 192.168.0.1 (it can be anything static, but this is a common choice). On your LAN card do NOT set a gateway address. 2. Configure Firestarter Internet Connection Sharing via the Wizard. 3. Connect a piece of cat5 Ethernet to your switch/hub from the Ethernet card you specified to be your LAN interface. Connect additional PCs to the other ports. or 3. Connect a crossover cable from your LAN interface to your other PC. 4. Start Firestarter. 5. Set Firestarter to start at boot. 6. Reboot client machines. |