From: Phil/La P. W. of P. <ph...@la...> - 2014-02-21 20:16:21
|
Le mercredi 19 février 2014 à 09:53 -0600, Josh Smith a écrit : > > Hello, > Hi Josh, > First: thanks for the terrific free software. > > I wish to use the 2-channel optical s/pdif mode on the Saffire Pro 24 -- > as opposed to the 8-channel ADAT mode. I have set my clock source to > "SPDIF-OPT" with correct sample rate, and the "LKD" LED comes on. > > Now, how do I get access to the two s/pdif optical channels in > ffado-mixer? I have tried routing ADAT 1/2 to Analog 3/4 physical > outputs (on the "Crossbar Router" tab) but I hear nothing in my > headphones. > > Maybe others have this question as well, but I could not find similar > historical posts on the matter. > > Can anyone make a suggestion? Thanks. > You are right, Saffire Pro 24 and 40 have the ability to replace ADAT by SPDIF, but I'm afraid that nothing has been yet implemented in this way in FFADO. This is the first time a user ask for it. I note this for a further exploration: it will require a little bit of reverse engineering to detect how Focusrite implemented this possibility. I'm afraid it will probably require a lot of additional code in FFADO, and I would have some difficulties to test, so do not await for anything before a while, sorry. > Also: I don't know what additional information (diagnostic output) you > might need to help me, but I want to err on the side of not posting a > ton of output if it's not needed. > Best regards, Phil -- Phil/La Page Web of Phil <ph...@la...> |