Menu
▾
▴
Re: [FFADO-user] Problems with Focusrite Saffire Pro 40 at 88200 Hz
|
From: Jannis P. <ja...@xf...> - 2012-09-23 13:30:44
|
Hey, On Sun, 23 Sep 2012 13:42:16 +0200 Jeremy Jongepier <je...@au...> wrote: > On 09/22/2012 06:34 PM, Jannis Pohlmann wrote: > > so I'm guessing this might be an issue with the VT6315 > > chipset, even though it has been tested successfully > > with the Saffire Pro 40, at least according to > > > > http://subversion.ffado.org/wiki/HostControllers > > I've put that report on there but I only tested with 44,1 and 48Khz. > I'll add that to the report. Or I could give my PRO 40 a spin at 88,2 > Khz of course with this controller. > And would it be possible to not use a pastebin service but just > include the logs in the e-mail itself? The pastebin service you used > seems to be offline temporarily now for instance. This is for > everyone of course, not just you personally :) ok, here are the logs inline, first ffado-diag, then jack. Regards, Jannis [jannis@monolith ~]$ ffado-diag FFADO diagnostic utility 2.999.0-2205 ============================ (C) 2008 Pieter Palmers 2009-2010 Arnold Krille === CHECK === Base system... kernel version............ 3.4.10-1.rt18.1.fc17.ccrma.x86_64.rt Preempt (low latency)... False RT patched.............. True old 1394 stack present.... False old 1394 stack loaded..... False old 1394 stack active..... False new 1394 stack present.... True new 1394 stack loaded..... True new 1394 stack active..... True /dev/raw1394 node present. False /dev/fw* permissions: crw------- 1 root root 250, 0 Sep 22 15:38 /dev/fw0 crw-rw----+ 1 root audio 250, 1 Sep 22 15:38 /dev/fw1 User IDs: uid=1000(jannis) gid=1000(jannis) groups=1000(jannis),10(wheel),18(dialout),63(audio),999(jackuser) Prerequisites (dynamic at run-time)... gcc ............... gcc (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) g++ ............... g++ (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) PyQt4 (by pyuic4) . Python User Interface Compiler 4.9.1 for Qt version 4.8.1 jackd ............. no message buffer overruns path ............ /usr/local/bin/jackd flags ........... -I/usr/local/include -L/usr/local/lib -ljack libraw1394 ........ 2.0.7 flags ........... -lraw1394 libavc1394 ........ 0.5.3 flags ........... -lavc1394 -lrom1394 -lraw1394 libiec61883 ....... 1.2.0 flags ........... -liec61883 -lraw1394 libxml++-2.6 ...... 2.34.2 flags ........... -I/usr/include/libxml++-2.6 -I/usr/lib64/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib64/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib64/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lglib-2.0 dbus-1 ............ 1.4.10 flags ........... -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -L/lib64 -ldbus-1 -lpthread -lrt Prerequisites (static at compile-time)... gcc ............... gcc (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) g++ ............... g++ (GCC) 4.7.0 20120507 (Red Hat 4.7.0-5) PyQt4 (by pyuic4) . Python User Interface Compiler 4.9.1 for Qt version 4.8.1 jackd ............. no message buffer overruns path ............ /usr/bin/jackd flags ........... -ljack libraw1394 ........ 2.0.7 flags ........... -lraw1394 libavc1394 ........ Package libavc1394 was not found in the pkg-config search path. flags ........... Package libavc1394 was not found in the pkg-config search path. libiec61883 ....... 1.2.0 flags ........... -liec61883 -lraw1394 libxml++-2.6 ...... 2.34.2 flags ........... -I/usr/include/libxml++-2.6 -I/usr/lib64/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib64/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib64/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lglib-2.0 dbus-1 ............ 1.4.10 flags ........... -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include -L/lib64 -ldbus-1 -lpthread -lrt uname -a... Linux monolith 3.4.10-1.rt18.1.fc17.ccrma.x86_64.rt #1 SMP PREEMPT RT Tue Aug 28 09:59:11 PDT 2012 x86_64 x86_64 x86_64 GNU/Linux Hardware... Host controllers: 02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (rev 01) (prog-if 10 [OHCI]) Subsystem: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=2K] Region 2: I/O ports at e000 [size=256] Capabilities: <access denied> Kernel driver in use: firewire_ohci CPU info: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 58 Stepping: 9 CPU MHz: 3801.000 BogoMIPS: 6859.68 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 6144K NUMA node0 CPU(s): 0-3 Configuration... IRQ information Hardware Interrupts: -------------------- IRQ 0: PID: None, count: [128, 0, 0, 0], Sched None (priority None), drivers: ['timer'] IRQ 1: PID: None, count: [2, 0, 0, 0], Sched None (priority None), drivers: ['i8042'] IRQ 8: PID: None, count: [1, 0, 0, 0], Sched None (priority None), drivers: ['rtc0'] IRQ 9: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['acpi'] IRQ 12: PID: None, count: [3, 0, 0, 1], Sched None (priority None), drivers: ['i8042'] IRQ 16: PID: None, count: [136, 27, 40, 9], Sched None (priority None), drivers: ['ehci_hcd:usb1'] IRQ 17: PID: None, count: [76, 1, 15, 1], Sched None (priority None), drivers: ['firewire_ohci'] IRQ 19: PID: None, count: [9086, 421, 897, 455], Sched None (priority None), drivers: ['ata_piix', 'ata_piix'] IRQ 23: PID: None, count: [121, 1, 2732, 5246], Sched None (priority None), drivers: ['ehci_hcd:usb2'] IRQ 40: PID: None, count: [0, 0, 0, 0], Sched None (priority None), drivers: ['xhci_hcd'] IRQ 41: PID: None, count: [5297, 1597, 1196, 717], Sched None (priority None), drivers: ['i915'] IRQ 42: PID: None, count: [546, 228, 47, 28], Sched None (priority None), drivers: ['snd_hda_intel'] IRQ 43: PID: None, count: [2599, 1276, 651, 349], Sched None (priority None), drivers: ['p2p1'] Software Interrupts: -------------------- === REPORT === FireWire kernel drivers: The new FireWire kernel stack is loaded. If running a kernel earlier than 2.6.37 and problems are experienced, either try with the old Firewire kernel stack or upgrade to a newer kernel (preferrably 2.6.37 or later). [jannis@monolith ~]$ jackd -R -P80 -dfirewire -r88200 -p32 -n3 -v4 jackdmp 1.9.9.4 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2012 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details no message buffer overruns no message buffer overruns no message buffer overruns JACK server starting in realtime mode with priority 80 1348329263002914: (ffado.cpp)[ 92] ffado_streaming_init: libffado 2.1.9999-2229 built Sep 22 2012 15:58:42 1348329263136773: Debug (ieee1394service.cpp)[ 363] initialize: The raw1394_read_cycle_timer_and_clock call and/or the CLOCK_MONOTONIC 1348329263136782: Debug (ieee1394service.cpp)[ 364] initialize: clock source is not available. 1348329263136783: Debug (ieee1394service.cpp)[ 365] initialize: Fallback to raw1394_read_cycle_timer. 1348329263136801: Debug (ieee1394service.cpp)[ 366] initialize: FFADO may be susceptible to NTP-induced clock discontinuities. 1348329263136803: Debug (ieee1394service.cpp)[ 367] initialize: If this is an issue, upgrade libraw1394 to version 2.1.0 or later and/or 1348329263136804: Debug (ieee1394service.cpp)[ 368] initialize: kernel 2.6.36 or later. 1348329263161398: Debug (devicemanager.cpp)[ 358] discover: Starting discovery... 1348329263354713: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263354740: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263354744: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263354746: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263354749: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263354750: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263354753: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263354784: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263354805: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263354807: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263354809: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263354811: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263354813: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263354814: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263354835: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263354837: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263354840: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263354842: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263354844: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263354845: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263354848: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263354868: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263354871: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263354873: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263354876: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263354877: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263354879: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263354881: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263354902: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263354903: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263354906: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263354908: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263354910: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263354911: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263354914: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263354996: Debug (devicemanager.cpp)[ 620] discover: driver found for device 0 1348329263355026: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263355027: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263355038: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263355040: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263355047: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263355049: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263355051: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263423478: Warning (dice_eap.cpp)[1791] read: No routes found. Base 0x7, offset 0x4000 1348329263458259: Warning (dice_eap.cpp)[1226] updateNameCache: What is this function about? 1348329263558546: Debug (devicemanager.cpp)[ 657] discover: discovery of node 0 on port 0 done... 1348329263558559: Debug (devicemanager.cpp)[ 665] discover: Discovery finished... 1348329263558564: Debug (devicemanager.cpp)[1269] showDeviceInfo: ===== Device Manager ===== 1348329263558567: Debug (Element.cpp)[ 121] show: Element DeviceManager 1348329263558569: Debug (devicemanager.cpp)[1277] showDeviceInfo: --- IEEE1394 Service 0 --- Iso handler info: Dumping IsoHandlerManager Stream handler information... State: 2 1348329263558586: Debug (devicemanager.cpp)[1287] showDeviceInfo: --- Device 0 --- 1348329263558589: Debug (dice_avdevice.cpp)[ 667] showDevice: Device is a DICE device 1348329263558592: Debug (ffadodevice.cpp)[ 215] showDevice: Attached to port.......: 0 (/dev/fw1) 1348329263558594: Debug (ffadodevice.cpp)[ 216] showDevice: Node...................: 0 1348329263558595: Debug (ffadodevice.cpp)[ 218] showDevice: Vendor name............: Focusrite 1348329263558605: Debug (ffadodevice.cpp)[ 220] showDevice: Model name.............: SAFFIRE_PRO_40 1348329263558607: Debug (ffadodevice.cpp)[ 222] showDevice: GUID...................: 00130e0401405e07 1348329263558614: Debug (ffadodevice.cpp)[ 227] showDevice: Assigned ID....: 00130e0401405e07 1348329263558660: (dice_avdevice.cpp)[ 670] showDevice: DICE Parameter Space info: 1348329263558667: (dice_avdevice.cpp)[ 671] showDevice: Global : offset=0x0028 size=0360 1348329263558669: (dice_avdevice.cpp)[ 672] showDevice: TX : offset=0x0190 size=0568 1348329263558680: (dice_avdevice.cpp)[ 673] showDevice: nb= 2 size=0280 1348329263558681: (dice_avdevice.cpp)[ 674] showDevice: RX : offset=0x03C8 size=1128 1348329263558691: (dice_avdevice.cpp)[ 675] showDevice: nb= 2 size=0280 1348329263558692: (dice_avdevice.cpp)[ 676] showDevice: UNUSED1 : offset=0x0830 size=0016 1348329263558696: (dice_avdevice.cpp)[ 677] showDevice: UNUSED2 : offset=0x0000 size=0000 1348329263558697: (dice_avdevice.cpp)[ 679] showDevice: Global param space: 1348329263560157: (dice_avdevice.cpp)[ 682] showDevice: Owner : 0x00000000FFFF0000 1348329263562050: (dice_avdevice.cpp)[ 685] showDevice: Notification : 0x00000000 1348329263565114: (dice_avdevice.cpp)[ 688] showDevice: Nick name : Pro40-005e07 1348329263566487: (dice_avdevice.cpp)[ 692] showDevice: Clock Select : 0x02 0x0C 1348329263568114: (dice_avdevice.cpp)[ 696] showDevice: Enable : false 1348329263569434: (dice_avdevice.cpp)[ 700] showDevice: Clock Status : locked 0x03 1348329263571046: (dice_avdevice.cpp)[ 703] showDevice: Extended Status : 0x00000000 1348329263573650: (dice_avdevice.cpp)[ 706] showDevice: Samplerate : 0x00015888 (88200) 1348329263575237: (dice_avdevice.cpp)[ 709] showDevice: Version : 0x01000400 1348329263576656: (dice_avdevice.cpp)[ 718] showDevice: Version : 0x01000400 (1.0.4.0) 1348329263578274: (dice_avdevice.cpp)[ 721] showDevice: Clock caps : 0x1325001E 1348329263580122: (dice_avdevice.cpp)[ 724] showDevice: Clock sources : 1348329263580130: (dice_avdevice.cpp)[ 730] showDevice: SPDIF 1348329263580132: (dice_avdevice.cpp)[ 730] showDevice: AES34 1348329263580135: (dice_avdevice.cpp)[ 730] showDevice: SPDIF-OPT 1348329263580136: (dice_avdevice.cpp)[ 730] showDevice: AES78 1348329263580138: (dice_avdevice.cpp)[ 730] showDevice: AES-ANY 1348329263580139: (dice_avdevice.cpp)[ 730] showDevice: ADAT 1348329263580141: (dice_avdevice.cpp)[ 730] showDevice: ADAT_AUX 1348329263580142: (dice_avdevice.cpp)[ 730] showDevice: Word Clock 1348329263580144: (dice_avdevice.cpp)[ 730] showDevice: Unused 1348329263580145: (dice_avdevice.cpp)[ 730] showDevice: Unused 1348329263580147: (dice_avdevice.cpp)[ 730] showDevice: Unused 1348329263580148: (dice_avdevice.cpp)[ 730] showDevice: Unused 1348329263580149: (dice_avdevice.cpp)[ 730] showDevice: Internal 1348329263580150: (dice_avdevice.cpp)[ 733] showDevice: TX param space: 1348329263580152: (dice_avdevice.cpp)[ 734] showDevice: Nb of xmit : 2 1348329263580153: (dice_avdevice.cpp)[ 736] showDevice: Transmitter 0: 1348329263581743: (dice_avdevice.cpp)[ 739] showDevice: ISO channel : -1 1348329263583352: (dice_avdevice.cpp)[ 741] showDevice: ISO speed : 2 1348329263584653: (dice_avdevice.cpp)[ 744] showDevice: Nb audio channels : 10 1348329263586226: (dice_avdevice.cpp)[ 746] showDevice: Nb midi channels : 1 1348329263587593: (dice_avdevice.cpp)[ 749] showDevice: AC3 caps : 0x00000000 1348329263589193: (dice_avdevice.cpp)[ 751] showDevice: AC3 enable : 0x00000000 1348329263590985: (dice_avdevice.cpp)[ 754] showDevice: Channel names : 1348329263590992: (dice_avdevice.cpp)[ 759] showDevice: IP 1 1348329263590998: (dice_avdevice.cpp)[ 759] showDevice: IP 2 1348329263590998: (dice_avdevice.cpp)[ 759] showDevice: IP 3 1348329263591001: (dice_avdevice.cpp)[ 759] showDevice: IP 4 1348329263591002: (dice_avdevice.cpp)[ 759] showDevice: IP 5 1348329263591003: (dice_avdevice.cpp)[ 759] showDevice: IP 6 1348329263591004: (dice_avdevice.cpp)[ 759] showDevice: IP 7 1348329263591005: (dice_avdevice.cpp)[ 759] showDevice: IP 8 1348329263591006: (dice_avdevice.cpp)[ 759] showDevice: SPDIF L 1348329263591007: (dice_avdevice.cpp)[ 759] showDevice: SPDIF R 1348329263591009: (dice_avdevice.cpp)[ 736] showDevice: Transmitter 1: 1348329263593496: (dice_avdevice.cpp)[ 739] showDevice: ISO channel : -1 1348329263595157: (dice_avdevice.cpp)[ 741] showDevice: ISO speed : 2 1348329263596587: (dice_avdevice.cpp)[ 744] showDevice: Nb audio channels : 10 1348329263598197: (dice_avdevice.cpp)[ 746] showDevice: Nb midi channels : 0 1348329263599595: (dice_avdevice.cpp)[ 749] showDevice: AC3 caps : 0x00000000 1348329263601223: (dice_avdevice.cpp)[ 751] showDevice: AC3 enable : 0x00000000 1348329263603241: (dice_avdevice.cpp)[ 754] showDevice: Channel names : 1348329263603247: (dice_avdevice.cpp)[ 759] showDevice: ADAT 1 1348329263603251: (dice_avdevice.cpp)[ 759] showDevice: ADAT 2 1348329263603253: (dice_avdevice.cpp)[ 759] showDevice: ADAT 3 1348329263603255: (dice_avdevice.cpp)[ 759] showDevice: ADAT 4 1348329263603256: (dice_avdevice.cpp)[ 759] showDevice: ADAT 5 1348329263603258: (dice_avdevice.cpp)[ 759] showDevice: ADAT 6 1348329263603259: (dice_avdevice.cpp)[ 759] showDevice: ADAT 7 1348329263603261: (dice_avdevice.cpp)[ 759] showDevice: ADAT 8 1348329263603262: (dice_avdevice.cpp)[ 759] showDevice: Loop 1 1348329263603264: (dice_avdevice.cpp)[ 759] showDevice: Loop 2 1348329263603267: (dice_avdevice.cpp)[ 763] showDevice: RX param space: 1348329263603271: (dice_avdevice.cpp)[ 764] showDevice: Nb of recv : 2 1348329263603272: (dice_avdevice.cpp)[ 766] showDevice: Receiver 0: 1348329263604522: (dice_avdevice.cpp)[ 769] showDevice: ISO channel : -1 1348329263606139: (dice_avdevice.cpp)[ 771] showDevice: Sequence start : 0 1348329263607508: (dice_avdevice.cpp)[ 774] showDevice: Nb audio channels : 12 1348329263609124: (dice_avdevice.cpp)[ 776] showDevice: Nb midi channels : 1 1348329263610513: (dice_avdevice.cpp)[ 779] showDevice: AC3 caps : 0x00000000 1348329263613273: (dice_avdevice.cpp)[ 781] showDevice: AC3 enable : 0x00000000 1348329263615100: (dice_avdevice.cpp)[ 784] showDevice: Channel names : 1348329263615106: (dice_avdevice.cpp)[ 789] showDevice: Mon 1 1348329263615120: (dice_avdevice.cpp)[ 789] showDevice: Mon 2 1348329263615122: (dice_avdevice.cpp)[ 789] showDevice: Line 3 1348329263615124: (dice_avdevice.cpp)[ 789] showDevice: Line 4 1348329263615125: (dice_avdevice.cpp)[ 789] showDevice: Line 5 1348329263615127: (dice_avdevice.cpp)[ 789] showDevice: Line 6 1348329263615128: (dice_avdevice.cpp)[ 789] showDevice: Line 7 1348329263615130: (dice_avdevice.cpp)[ 789] showDevice: Line 8 1348329263615131: (dice_avdevice.cpp)[ 789] showDevice: Line 9 1348329263615132: (dice_avdevice.cpp)[ 789] showDevice: Line 10 1348329263615133: (dice_avdevice.cpp)[ 789] showDevice: SPDIF L 1348329263615135: (dice_avdevice.cpp)[ 789] showDevice: SPDIF R 1348329263615145: (dice_avdevice.cpp)[ 766] showDevice: Receiver 1: 1348329263616444: (dice_avdevice.cpp)[ 769] showDevice: ISO channel : -1 1348329263618025: (dice_avdevice.cpp)[ 771] showDevice: Sequence start : 0 1348329263619410: (dice_avdevice.cpp)[ 774] showDevice: Nb audio channels : 8 1348329263621047: (dice_avdevice.cpp)[ 776] showDevice: Nb midi channels : 0 1348329263622680: (dice_avdevice.cpp)[ 779] showDevice: AC3 caps : 0x00000000 1348329263624251: (dice_avdevice.cpp)[ 781] showDevice: AC3 enable : 0x00000000 1348329263626053: (dice_avdevice.cpp)[ 784] showDevice: Channel names : 1348329263626060: (dice_avdevice.cpp)[ 789] showDevice: ADAT 1 1348329263626065: (dice_avdevice.cpp)[ 789] showDevice: ADAT 2 1348329263626066: (dice_avdevice.cpp)[ 789] showDevice: ADAT 3 1348329263626071: (dice_avdevice.cpp)[ 789] showDevice: ADAT 4 1348329263626072: (dice_avdevice.cpp)[ 789] showDevice: ADAT 5 1348329263626074: (dice_avdevice.cpp)[ 789] showDevice: ADAT 6 1348329263626075: (dice_avdevice.cpp)[ 789] showDevice: ADAT 7 1348329263626076: (dice_avdevice.cpp)[ 789] showDevice: ADAT 8 1348329263626108: Debug (devicemanager.cpp)[1290] showDeviceInfo: Clock sync sources: 1348329263633418: Debug (devicemanager.cpp)[1299] showDeviceInfo: Type: AES , Id: 0, Valid: 1, Active: 0, Locked 0, Slipping: 0, Description: SPDIF 1348329263633460: Debug (devicemanager.cpp)[1299] showDeviceInfo: Type: AES , Id: 2, Valid: 1, Active: 0, Locked 0, Slipping: 0, Description: SPDIF-OPT 1348329263633475: Debug (devicemanager.cpp)[1299] showDeviceInfo: Type: ADAT , Id: 5, Valid: 1, Active: 0, Locked 0, Slipping: 0, Description: ADAT 1348329263633482: Debug (devicemanager.cpp)[1299] showDeviceInfo: Type: Compound Syt Match, Id: 8, Valid: 1, Active: 0, Locked 0, Slipping: 0, Description: Unused 1348329263633492: Debug (devicemanager.cpp)[1299] showDeviceInfo: Type: Compound Syt Match, Id: 9, Valid: 1, Active: 0, Locked 0, Slipping: 0, Description: Unused 1348329263633500: Debug (devicemanager.cpp)[1299] showDeviceInfo: Type: Internal , Id: 12, Valid: 1, Active: 1, Locked 1, Slipping: 0, Description: Internal 1348329263640253: (dice_avdevice.cpp)[ 274] setSamplingFrequency: Setting sample rate: 88200 1348329263697774: Debug (dice_avdevice.cpp)[ 667] showDevice: Device is a DICE device 1348329263697816: Debug (ffadodevice.cpp)[ 215] showDevice: Attached to port.......: 0 (/dev/fw1) 1348329263697818: Debug (ffadodevice.cpp)[ 216] showDevice: Node...................: 0 1348329263697821: Debug (ffadodevice.cpp)[ 218] showDevice: Vendor name............: Focusrite 1348329263697822: Debug (ffadodevice.cpp)[ 220] showDevice: Model name.............: SAFFIRE_PRO_40 1348329263697826: Debug (ffadodevice.cpp)[ 222] showDevice: GUID...................: 00130e0401405e07 1348329263697833: Debug (ffadodevice.cpp)[ 227] showDevice: Assigned ID....: 00130e0401405e07 1348329263697886: (dice_avdevice.cpp)[ 670] showDevice: DICE Parameter Space info: 1348329263697890: (dice_avdevice.cpp)[ 671] showDevice: Global : offset=0x0028 size=0360 1348329263697912: (dice_avdevice.cpp)[ 672] showDevice: TX : offset=0x0190 size=0568 1348329263697913: (dice_avdevice.cpp)[ 673] showDevice: nb= 1 size=0280 1348329263697916: (dice_avdevice.cpp)[ 674] showDevice: RX : offset=0x03C8 size=1128 1348329263697917: (dice_avdevice.cpp)[ 675] showDevice: nb= 1 size=0280 1348329263697919: (dice_avdevice.cpp)[ 676] showDevice: UNUSED1 : offset=0x0830 size=0016 1348329263697920: (dice_avdevice.cpp)[ 677] showDevice: UNUSED2 : offset=0x0000 size=0000 1348329263697922: (dice_avdevice.cpp)[ 679] showDevice: Global param space: 1348329263699348: (dice_avdevice.cpp)[ 682] showDevice: Owner : 0xE0000000FFC1FFFF 1348329263700745: (dice_avdevice.cpp)[ 685] showDevice: Notification : 0x00000010 1348329263704245: (dice_avdevice.cpp)[ 688] showDevice: Nick name : Pro40-005e07 1348329263705663: (dice_avdevice.cpp)[ 692] showDevice: Clock Select : 0x03 0x0C 1348329263707276: (dice_avdevice.cpp)[ 696] showDevice: Enable : false 1348329263708592: (dice_avdevice.cpp)[ 700] showDevice: Clock Status : not locked 0x03 1348329263710186: (dice_avdevice.cpp)[ 703] showDevice: Extended Status : 0x00000000 1348329263712744: (dice_avdevice.cpp)[ 706] showDevice: Samplerate : 0x00015888 (88200) 1348329263714368: (dice_avdevice.cpp)[ 709] showDevice: Version : 0x01000400 1348329263715761: (dice_avdevice.cpp)[ 718] showDevice: Version : 0x01000400 (1.0.4.0) 1348329263717341: (dice_avdevice.cpp)[ 721] showDevice: Clock caps : 0x1325001E 1348329263719129: (dice_avdevice.cpp)[ 724] showDevice: Clock sources : 1348329263719134: (dice_avdevice.cpp)[ 730] showDevice: SPDIF 1348329263719139: (dice_avdevice.cpp)[ 730] showDevice: AES34 1348329263719140: (dice_avdevice.cpp)[ 730] showDevice: SPDIF-OPT 1348329263719144: (dice_avdevice.cpp)[ 730] showDevice: AES78 1348329263719146: (dice_avdevice.cpp)[ 730] showDevice: AES-ANY 1348329263719148: (dice_avdevice.cpp)[ 730] showDevice: ADAT 1348329263719149: (dice_avdevice.cpp)[ 730] showDevice: ADAT_AUX 1348329263719151: (dice_avdevice.cpp)[ 730] showDevice: Word Clock 1348329263719152: (dice_avdevice.cpp)[ 730] showDevice: Unused 1348329263719154: (dice_avdevice.cpp)[ 730] showDevice: Unused 1348329263719155: (dice_avdevice.cpp)[ 730] showDevice: Unused 1348329263719156: (dice_avdevice.cpp)[ 730] showDevice: Unused 1348329263719157: (dice_avdevice.cpp)[ 730] showDevice: Internal 1348329263719159: (dice_avdevice.cpp)[ 733] showDevice: TX param space: 1348329263719160: (dice_avdevice.cpp)[ 734] showDevice: Nb of xmit : 1 1348329263719162: (dice_avdevice.cpp)[ 736] showDevice: Transmitter 0: 1348329263720535: (dice_avdevice.cpp)[ 739] showDevice: ISO channel : -1 1348329263722339: (dice_avdevice.cpp)[ 741] showDevice: ISO speed : 2 1348329263724013: (dice_avdevice.cpp)[ 744] showDevice: Nb audio channels : 16 1348329263725345: (dice_avdevice.cpp)[ 746] showDevice: Nb midi channels : 1 1348329263726968: (dice_avdevice.cpp)[ 749] showDevice: AC3 caps : 0x00000000 1348329263728363: (dice_avdevice.cpp)[ 751] showDevice: AC3 enable : 0x00000000 1348329263730186: (dice_avdevice.cpp)[ 754] showDevice: Channel names : 1348329263730198: (dice_avdevice.cpp)[ 759] showDevice: IP 1 1348329263730199: (dice_avdevice.cpp)[ 759] showDevice: IP 2 1348329263730202: (dice_avdevice.cpp)[ 759] showDevice: IP 3 1348329263730203: (dice_avdevice.cpp)[ 759] showDevice: IP 4 1348329263730205: (dice_avdevice.cpp)[ 759] showDevice: IP 5 1348329263730206: (dice_avdevice.cpp)[ 759] showDevice: IP 6 1348329263730208: (dice_avdevice.cpp)[ 759] showDevice: IP 7 1348329263730209: (dice_avdevice.cpp)[ 759] showDevice: IP 8 1348329263730211: (dice_avdevice.cpp)[ 759] showDevice: SPDIF L 1348329263730212: (dice_avdevice.cpp)[ 759] showDevice: SPDIF R 1348329263730214: (dice_avdevice.cpp)[ 759] showDevice: ADAT 1 1348329263730215: (dice_avdevice.cpp)[ 759] showDevice: ADAT 2 1348329263730217: (dice_avdevice.cpp)[ 759] showDevice: ADAT 3 1348329263730218: (dice_avdevice.cpp)[ 759] showDevice: ADAT 4 1348329263730220: (dice_avdevice.cpp)[ 759] showDevice: Loop 1 1348329263730221: (dice_avdevice.cpp)[ 759] showDevice: Loop 2 1348329263730224: (dice_avdevice.cpp)[ 763] showDevice: RX param space: 1348329263730226: (dice_avdevice.cpp)[ 764] showDevice: Nb of recv : 1 1348329263730228: (dice_avdevice.cpp)[ 766] showDevice: Receiver 0: 1348329263732747: (dice_avdevice.cpp)[ 769] showDevice: ISO channel : -1 1348329263734361: (dice_avdevice.cpp)[ 771] showDevice: Sequence start : 0 1348329263735752: (dice_avdevice.cpp)[ 774] showDevice: Nb audio channels : 16 1348329263737338: (dice_avdevice.cpp)[ 776] showDevice: Nb midi channels : 1 1348329263738640: (dice_avdevice.cpp)[ 779] showDevice: AC3 caps : 0x00000000 1348329263740235: (dice_avdevice.cpp)[ 781] showDevice: AC3 enable : 0x00000000 1348329263742421: (dice_avdevice.cpp)[ 784] showDevice: Channel names : 1348329263742455: (dice_avdevice.cpp)[ 789] showDevice: Mon 1 1348329263742466: (dice_avdevice.cpp)[ 789] showDevice: Mon 2 1348329263742476: (dice_avdevice.cpp)[ 789] showDevice: Line 3 1348329263742487: (dice_avdevice.cpp)[ 789] showDevice: Line 4 1348329263742495: (dice_avdevice.cpp)[ 789] showDevice: Line 5 1348329263742501: (dice_avdevice.cpp)[ 789] showDevice: Line 6 1348329263742509: (dice_avdevice.cpp)[ 789] showDevice: Line 7 1348329263742516: (dice_avdevice.cpp)[ 789] showDevice: Line 8 1348329263742524: (dice_avdevice.cpp)[ 789] showDevice: Line 9 1348329263742530: (dice_avdevice.cpp)[ 789] showDevice: Line 10 1348329263742540: (dice_avdevice.cpp)[ 789] showDevice: SPDIF L 1348329263742547: (dice_avdevice.cpp)[ 789] showDevice: SPDIF R 1348329263742574: (dice_avdevice.cpp)[ 789] showDevice: ADAT 1 1348329263742581: (dice_avdevice.cpp)[ 789] showDevice: ADAT 2 1348329263742595: (dice_avdevice.cpp)[ 789] showDevice: ADAT 3 1348329263742601: (dice_avdevice.cpp)[ 789] showDevice: ADAT 4 1348329263742753: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263742791: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263742812: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263742822: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263742832: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263742839: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263742849: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263742930: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263742957: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263742965: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263742975: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263742983: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263743001: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263743009: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263743077: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263743088: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263743098: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263743106: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263743115: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263743122: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263743132: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263743181: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263743193: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263743201: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263743211: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263743218: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263743227: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263743234: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263743285: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263743296: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263743306: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263743313: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263743322: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263743329: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263743339: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263800781: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263800849: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263800858: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263800868: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263800876: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263800885: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263800892: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263800931: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263800943: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263800952: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263800959: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263800968: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263800975: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263800983: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263801013: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263801025: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263801032: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263801051: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263801058: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263801069: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263801077: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263801111: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263801122: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263801131: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263801138: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263801146: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263801153: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263801164: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263801193: Debug (Configuration.cpp)[ 163] showSetting: Group: (null) 1348329263801205: Debug (Configuration.cpp)[ 185] showSetting: vendorid = 4878 (0x0000130E) 1348329263801213: Debug (Configuration.cpp)[ 185] showSetting: modelid = 5 (0x00000005) 1348329263801222: Debug (Configuration.cpp)[ 209] showSetting: vendorname = Focusrite 1348329263801229: Debug (Configuration.cpp)[ 209] showSetting: modelname = Saffire PRO 40 1348329263801238: Debug (Configuration.cpp)[ 185] showSetting: driver = 20 (0x00000014) 1348329263801245: Debug (Configuration.cpp)[ 209] showSetting: mixer = Saffire_Dice 1348329263859480: Warning (StreamProcessor.cpp)[1708] updateState: ignoring identity state update from/to ePS_Created 1348329263859555: Warning (StreamProcessor.cpp)[1708] updateState: ignoring identity state update from/to ePS_Created Handler type................: Receive Port, Channel...............: 0, 0 Buffer, MaxPacketSize, IRQ..: 128, 1104, 1 Last cycle, dropped.........: -1, 0, 0 Handler type................: Transmit Port, Channel...............: 0, 1 Buffer, MaxPacketSize, IRQ..: 128, 1104, 1 Speed ..................: 2 Min ISOXMT bufferfill : 7999 Last cycle, dropped.........: -1, 0, 0 1348329264744415: Warning (StreamProcessor.cpp)[ 798] getPacket: Instantanous samplerate more than 1% off nominal. [Nom fs: 88200.000000, Instantanous fs: 44077.569779, diff: 44122.430221 ( 0.500254)] 1348329265744858: Warning (IsoHandlerManager.cpp)[ 292] Execute: Timeout while waiting for activity 1348329266749223: Fatal (IsoHandlerManager.cpp)[ 348] Execute: (0x1513800, Receive) Handler died: now: E4D8A555, last: E0D624A4, diff: 49275057 (max: 49152000) 1348329266749242: Warning (StreamProcessor.cpp)[ 173] handlerDied: Handler died for 0x1549fa0 1348329266749325: Debug (StreamProcessorManager.cpp)[1401] waitForPeriod: Xrun on RECV SP 0x1549fa0 due to ISO side xrun StreamProcessor 0x1549fa0, Receive: Port, Channel : 0, 0 Packets, Dropped, Skipped : 3427, 0, 0 Now : 02812316235 (114s 3467c 1611t) Xrun? : True State : ePS_Stopped (Next: ePS_Running) transition at : 3419 Buffer : 0x154a1e0 Framerate : Nominal: 88200, Sync: 88192.008901, Buffer 88192.008901 TimestampedBuffer (0x154a1e0): 0016 frames, 0016 events Timestamps : head: 2763039933.542, Tail: 2763044392.177, Next tail: 2763048850.812 Head - Tail : -4458.635 (-16.000000 frames) DLL Rate : 4458.635254 (278.664703) DLL Bandwidth : 4.069010e-09 1/ticks (0.100000 Hz) 1348329266749380: Debug (StreamProcessorManager.cpp)[1406] waitForPeriod: Xrun on RECV SP 0x1549fa0 due to buffer side xrun StreamProcessor 0x1549fa0, Receive: Port, Channel : 0, 0 Packets, Dropped, Skipped : 3427, 0, 0 Now : 02812316924 (114s 3467c 2300t) Xrun? : True State : ePS_Stopped (Next: ePS_Running) transition at : 3419 Buffer : 0x154a1e0 Framerate : Nominal: 88200, Sync: 88192.008901, Buffer 88192.008901 TimestampedBuffer (0x154a1e0): 0016 frames, 0016 events Timestamps : head: 2763039933.542, Tail: 2763044392.177, Next tail: 2763048850.812 Head - Tail : -4458.635 (-16.000000 frames) DLL Rate : 4458.635254 (278.664703) DLL Bandwidth : 4.069010e-09 1/ticks (0.100000 Hz) 1348329266749402: Warning (StreamProcessorManager.cpp)[ 913] alignReceivedStreams: xrun while aligning streams... 1348329266749404: Error (StreamProcessorManager.cpp)[ 877] syncStartAll: Could not align streams... 1348329266749414: Fatal (IsoHandlerManager.cpp)[ 348] Execute: (0x15135f0, Transmit) Handler died: now: E4D8BBC4, last: E0D704BE, diff: 49236742 (max: 49152000) 1348329266749416: Warning (StreamProcessor.cpp)[ 173] handlerDied: Handler died for 0x154af10 1348329266749438: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Receive' with state: 2 1348329266749440: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x1549fa0 1348329266749444: Error (StreamProcessorManager.cpp)[ 518] startDryRunning: Could not put 'Receive' SP 0x1549fa0 into the dry-running state 1348329266749446: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Transmit' with state: 2 1348329266749448: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x154af10 1348329266749449: Error (StreamProcessorManager.cpp)[ 502] startDryRunning: Could not put 'Transmit' SP 0x154af10 into the dry-running state 1348329266749451: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Transmit' with state: 2 1348329266749452: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x154af10 1348329266749453: Error (StreamProcessorManager.cpp)[ 502] startDryRunning: Could not put 'Transmit' SP 0x154af10 into the dry-running state 1348329266749454: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Transmit' with state: 2 1348329266749456: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x154af10 1348329266749457: Error (StreamProcessorManager.cpp)[ 502] startDryRunning: Could not put 'Transmit' SP 0x154af10 into the dry-running state 1348329266749459: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Transmit' with state: 2 1348329266749460: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x154af10 1348329266749461: Error (StreamProcessorManager.cpp)[ 502] startDryRunning: Could not put 'Transmit' SP 0x154af10 into the dry-running state 1348329266749462: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Transmit' with state: 2 1348329266749464: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x154af10 1348329266749465: Error (StreamProcessorManager.cpp)[ 502] startDryRunning: Could not put 'Transmit' SP 0x154af10 into the dry-running state 1348329266749467: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Transmit' with state: 2 1348329266749468: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x154af10 1348329266749469: Error (StreamProcessorManager.cpp)[ 502] startDryRunning: Could not put 'Transmit' SP 0x154af10 into the dry-running state 1348329266749470: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Transmit' with state: 2 1348329266749472: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x154af10 1348329266749473: Error (StreamProcessorManager.cpp)[ 502] startDryRunning: Could not put 'Transmit' SP 0x154af10 into the dry-running state 1348329266749475: Error (IsoHandlerManager.cpp)[1918] requestEnable: Enable requested on stream 'Transmit' with state: 2 1348329266749475: Error (StreamProcessor.cpp)[1244] scheduleStartDryRunning: Could not start handler for SP 0x154af10 1348329266749477: Error (StreamProcessorManager.cpp)[ 502] startDryRunning: Could not put 'Transmit' SP 0x154af10 into the dry-running state 1348329266749478: Fatal (StreamProcessorManager.cpp)[1025] start: Could not syncStartAll... 1348329266749481: Warning (devicemanager.cpp)[ 929] startStreaming: Failed to start SPM! |