Menu
▾
▴
Re: [FFADO-user] Edirol FA-101, ffado and Ubuntu 10.04 don't want to work
|
From: Aaron P. <aar...@ya...> - 2010-07-13 09:09:41
|
arnold - thanks for your quick reply. my apologies for your receiving this twice, i'm new at this mailing list thing. here is the output of ffado-diag: FFADO diagnostic utility 0.1 ============================ (C) 2008 Pieter Palmers === CHECK === Base system... kernel version............ 2.6.32-23-generic FIXME: implement test for RT kernel RT patched............... False old 1394 stack present.... True old 1394 stack loaded..... True old 1394 stack active..... True new 1394 stack present.... True new 1394 stack loaded..... False new 1394 stack active..... False /dev/raw1394 node present. True /dev/raw1394 permissions.. True Prerequisites (dynamic at run-time)... gcc................ gcc (Ubuntu 4.4.3-4ubuntu5) 4.4.3 g++................ sh: g++: not found PyQt............... sh: pyuic: not found jackd.............. jackd version 0.118.0 tmpdir /dev/shm protocol 24 path............. /usr/bin/jackd flags............ Package jack was not found in the pkg-config search path. Perhaps you should add the directory containing `jack.pc' to the PKG_CONFIG_PATH environment variable No package 'jack' found libraw1394......... Package libraw1394 was not found in the pkg-config search path. Perhaps you should add the directory containing `libraw1394.pc' to the PKG_CONFIG_PATH environment variable No package 'libraw1394' found flags............ Package libraw1394 was not found in the pkg-config search path. Perhaps you should add the directory containing `libraw1394.pc' to the PKG_CONFIG_PATH environment variable No package 'libraw1394' found libavc1394......... Package libavc1394 was not found in the pkg-config search path. Perhaps you should add the directory containing `libavc1394.pc' to the PKG_CONFIG_PATH environment variable No package 'libavc1394' found flags............ Package libavc1394 was not found in the pkg-config search path. Perhaps you should add the directory containing `libavc1394.pc' to the PKG_CONFIG_PATH environment variable No package 'libavc1394' found libiec61883........ Package libiec61883 was not found in the pkg-config search path. Perhaps you should add the directory containing `libiec61883.pc' to the PKG_CONFIG_PATH environment variable No package 'libiec61883' found flags............ Package libiec61883 was not found in the pkg-config search path. Perhaps you should add the directory containing `libiec61883.pc' to the PKG_CONFIG_PATH environment variable No package 'libiec61883' found libxml++-2.6....... Package libxml++-2.6 was not found in the pkg-config search path. Perhaps you should add the directory containing `libxml++-2.6.pc' to the PKG_CONFIG_PATH environment variable No package 'libxml++-2.6' found flags............ Package libxml++-2.6 was not found in the pkg-config search path. Perhaps you should add the directory containing `libxml++-2.6.pc' to the PKG_CONFIG_PATH environment variable No package 'libxml++-2.6' found dbus-1............. Package dbus-1 was not found in the pkg-config search path. Perhaps you should add the directory containing `dbus-1.pc' to the PKG_CONFIG_PATH environment variable No package 'dbus-1' found flags............ Package dbus-1 was not found in the pkg-config search path. Perhaps you should add the directory containing `dbus-1.pc' to the PKG_CONFIG_PATH environment variable No package 'dbus-1' found Prerequisites (static at compile-time)... gcc................ gcc (Ubuntu 4.4.3-4ubuntu5) 4.4.3 g++................ g++ (Ubuntu 4.4.3-4ubuntu5) 4.4.3 PyQt............... sh: pyuic: not found jackd.............. sh: jackd: not found path............. flags............ Package jack was not found in the pkg-config search path. libraw1394......... 2.0.4 flags............ -lraw1394 libavc1394......... Package libavc1394 was not found in the pkg-config search path. flags............ Package libavc1394 was not found in the pkg-config search path. libiec61883........ 1.2.0 flags............ -liec61883 -lraw1394 libxml++-2.6....... 2.26.1 flags............ -pthread -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -pthread -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lgthread-2.0 -lrt -lglib-2.0 dbus-1............. 1.2.16 flags............ -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -L/lib -ldbus-1 -lpthread -lrt Hardware... Host controllers: 03:01.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10) Subsystem: Texas Instruments Device [104c:8019] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at c0205000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394 CPU info: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 3 model name : Intel(R) Pentium(R) 4 CPU 2.80GHz stepping : 3 cpu MHz : 2792.664 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl cid bogomips : 5585.32 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 32 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 3 model name : Intel(R) Pentium(R) 4 CPU 2.80GHz stepping : 3 cpu MHz : 2792.664 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl cid bogomips : 5586.34 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 32 bits virtual power management: Configuration... IRQ information Hardware Interrupts: -------------------- IRQ 0: PID: None, count: [55, 55], Sched None (priority None), drivers: ['timer'] IRQ 1: PID: None, count: [35, 35], Sched None (priority None), drivers: ['i8042'] IRQ 4: PID: None, count: [2, 2], Sched None (priority None), drivers: [''] IRQ 6: PID: None, count: [4, 4], Sched None (priority None), drivers: ['floppy'] IRQ 7: PID: None, count: [0, 0], Sched None (priority None), drivers: ['parport0'] IRQ 8: PID: None, count: [1, 1], Sched None (priority None), drivers: ['rtc0'] IRQ 9: PID: None, count: [0, 0], Sched None (priority None), drivers: ['acpi'] IRQ 12: PID: None, count: [143, 143], Sched None (priority None), drivers: ['i8042'] IRQ 14: PID: None, count: [10849, 10849], Sched None (priority None), drivers: ['ata_piix'] IRQ 15: PID: None, count: [824, 824], Sched None (priority None), drivers: ['ata_piix'] IRQ 16: PID: None, count: [1025, 1025], Sched None (priority None), drivers: ['uhci_hcd:usb2', 'uhci_hcd:usb5', 'radeon'] IRQ 17: PID: None, count: [111, 111], Sched None (priority None), drivers: ['Intel ICH5'] IRQ 18: PID: None, count: [0, 0], Sched None (priority None), drivers: ['uhci_hcd:usb4'] IRQ 19: PID: None, count: [0, 0], Sched None (priority None), drivers: ['uhci_hcd:usb3'] IRQ 20: PID: None, count: [125, 125], Sched None (priority None), drivers: ['eth0'] IRQ 22: PID: None, count: [233, 233], Sched None (priority None), drivers: ['ohci1394'] IRQ 23: PID: None, count: [0, 0], Sched None (priority None), drivers: ['ehci_hcd:usb1'] Software Interrupts: -------------------- === REPORT === FireWire kernel drivers: [PASS] Kernel modules present and correctly loaded. [PASS] /dev/raw1394 node present and accessible. and: aa@ibm-lucid:~$ jackd -dfirewire -v6 jackd 0.118.0 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details Memory locking is unlimited - this is dangerous. You should probably alter the line: @audio - memlock unlimited in your /etc/limits.conf to read: @audio - memlock 963549 no message buffer overruns JACK compiled with System V SHM support. loading driver .. libffado 2.0.0 built Mar 31 2010 14:47:42 it seems to be running. with this console running when i try to start from qjackctl it starts but with ACTIVE in yellow instead of STARTED. as far as the ffado-mixer goes, I need to start ffado-dbus-server manually from console for ffado-mixer to work. it sees my edirol no problem but I get the following errors: FFADO Control DBUS service Part of the FFADO project -- www.ffado.org Version: 2.0.0 (C) 2008, Pieter Palmers This program comes with ABSOLUTELY NO WARRANTY. ----------------------------------------------- Discovering devices... Starting DBUS service... Running... (press ctrl-c to stop & exit) 06845254426: Error (avc_avdevice.cpp)[ 289] supportsSamplingFrequency: sample rate not supported by input plug 06845273900: Error (avc_avdevice.cpp)[ 289] supportsSamplingFrequency: sample rate not supported by input plug 06845293000: Error (avc_avdevice.cpp)[ 289] supportsSamplingFrequency: sample rate not supported by input plug 06845316236: Error (avc_avdevice.cpp)[ 289] supportsSamplingFrequency: sample rate not supported by input plug 06845367831: Error (avc_avdevice.cpp)[ 289] supportsSamplingFrequency: sample rate not supported by input plug 06845389487: Error (avc_avdevice.cpp)[ 289] supportsSamplingFrequency: sample rate not supported by input plug 06845409277: Error (avc_avdevice.cpp)[ 289] supportsSamplingFrequency: sample rate not supported by input plug 06845430625: Error (avc_avdevice.cpp)[ 289] supportsSamplingFrequency: sample rate not supported by input plug Thanks again Aaron --- On Mon, 7/12/10, Arnold Krille <ar...@ar...> wrote: From: Arnold Krille <ar...@ar...> Subject: Re: [FFADO-user] Edirol FA-101, ffado and Ubuntu 10.04 don't want to work To: ffa...@li... Cc: "Aaron Peart" <aar...@ya...> Received: Monday, July 12, 2010, 4:40 PM On Monday 12 July 2010 20:30:07 Aaron Peart wrote: > I've been running ubuntu 10.04 and i just bought an edirol > FA-101 and I'm > having some problems getting jack to run. My > permissions are set up > properly, i've got my username in the audio > and video group, and jack is > set to use the firewire driver. > > When > I try to start jack I get the following message: > > loading driver > .. > libffado 2.0.0 built Mar 31 2010 14:47:42 > firewire ERR: Error > creating FFADO streaming device > cannot load driver module firewire > no > message buffer overruns Please post the output of ffado-diag and the output of "jackd -dfirewire -v6" as stated in the README file. All we can currently say is that ffado failed to create the streaming device... > And when I try to run ffadomixer i get > the following message: > > Somehow the connection to the dbus-service > of FFADO couldn't be > established. Either you missed clicking the "Try again" button, or you don't have enough karma to access /dev/raw1394 or /dev/fw*... > Any suggestions you > guys can throw at me would be greatly appreciated. Every document I read > said this device would work with ffado so I know > it's an issue with > my computer. |
