Re: [FFADO-devel] firestudio

[Pieter P. <pi...@jo...>]

John,

The firestudio is not supported. PreSonus promised to provide us the 
things we need in order for it to be supported, but they seem to have 
forgotten that.

Please contact them if you would like to see support for the FireStudio 
in FFADO.

Greets,

Pieter


john wrote:
> I was trying to get this going, and came across an error after I get the 
> configRom initialized:
> 
> 3369630497: Debug (configrom.cpp)[ 543] printConfigRom: Config ROM
> 3369630522: Debug (configrom.cpp)[ 544] printConfigRom:         Current 
> Node Id:        0
> 3369630544: Debug (configrom.cpp)[ 545] printConfigRom:         
> GUID:                   0x000A920402090527
> 3369630566: Debug (configrom.cpp)[ 546] printConfigRom:         Vendor 
> Name:            PreSonus
> 3369630590: Debug (configrom.cpp)[ 547] printConfigRom:         Model 
> Name:             FIRESTUDIO
> 3369630611: Debug (configrom.cpp)[ 548] printConfigRom:         Node 
> Vendor ID:         0x000a92
> 3369630631: Debug (configrom.cpp)[ 549] printConfigRom:         Model 
> Id:               0x00000a92
> 3369630655: Debug (configrom.cpp)[ 550] printConfigRom:         Unit 
> Specifier ID:      0x000a92
> 3369630676: Debug (configrom.cpp)[ 551] printConfigRom:         Unit 
> version:           0x00000001
> 3369630697: Debug (configrom.cpp)[ 552] printConfigRom:         ISO 
> resource manager:   1
> 3369630717: Debug (configrom.cpp)[ 553] printConfigRom:         Cycle 
> master capable:   1
> 3369630738: Debug (configrom.cpp)[ 554] printConfigRom:         Bus 
> manager capable:    0
> 3369630759: Debug (configrom.cpp)[ 555] printConfigRom:         Cycle 
> clock accuracy:   255
> 3369630779: Debug (configrom.cpp)[ 557] printConfigRom:         Max 
> rec:                8 (max asy payload: 512 bytes)
> 
> 
> Then the first status command is sent:
> 
> avc1394_send_command_block:  0xC02FFF01 0x00000000 0x0000FFFF (STATUS)
> 
> The raw1394_write completes, but then in raw1394_loop_iterate (from 
> libraw1394) the req.error is set to 131079, and that's where it stops.  
> Apparently the device doesn't like the status command.  The same status 
> command works on the Firebox, does it have to change?
> 
> --john
> 
> 
> -------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> FFADO-devel mailing list
> FFA...@li...
> https://lists.sourceforge.net/lists/listinfo/ffado-devel
>