From: Justin M. S. <str...@cl...> - 2007-10-21 19:46:39
|
On Fri, 19 Oct 2007, Justin M. Streiner wrote: > I'll see if I can do a few things this weekend: > 1. try to get motutest to output the contents that it did the first time I > ran it (which I unfortuntely forgot to buffer) > 2. run motutest through strace or gdb to see where it's hanging I will give these another go tonight. > 3. power the 8pre on while not connected to anything, then plug it into a > Windows box that has the 8pre drivers installed and see if it will switch to > interface mode, or if I have to cycle the power on the 8pre to get this to > happen. I tested the 8pre's behavior on a Windows (XP Pro service pack 2) box today and it will switch from converter to interface mode within 1-2 seconds of the firewire cable being connected to the PC, even if the 8pre was first powered on without being connected. It will immediately revert back to converter mode if the cable is unplugged again. I plugged a mic into one of the 8pre's analog inputs and opened the CueMix console, pulled the channel fader up and sawa response on that channel's meter on the console. If I unplug the firewire cable with CueMix still open, it will pop up an error message and exit after you click OK - reasonable behavior. I'll let you know what I come up with on 1 and 2 tonight. jms |