Try with pre-rendered set to 1.This fixed some issues with input lag people had when moving their joystick.If you are using a tv they can also have input-lag.Most tv have a"game modus"or setting to avoid this.
My profile for you to test if it improves something for you.Before you do anything make a good back-up of you own settings.This is one profile I tested to get more fps from my ps3-eye by lowering the resolution.The most important for you to test is that filter part.
Try with pre-rendered set to 1.This fixed some issues with input lag people had when moving their joystick.If you are using a tv they can also have input-lag.Most tv have a"game modus"or setting to avoid this.
My profile for you to test if it improves something for you.Before you do anything make a good back-up of you own settings.This is one profile I tested to get more fps from my ps3-eye by lowering the resolution.The most important for you to test is that filter part.
[General]
XAxisSource=0
YAxisSource=0
ZAxisSource=0
[Tracking]
Smooth=1
invertYaw=true
invertPitch=true
invertRoll=false
invertX=false
invertY=false
invertZ=false
[GameProtocol]
Selection=3
DLL=FTNoIR_Protocol_FT.dll
2ndDLL=None
[TrackerSource]
Selection=4
DLL=FTNoIR_Tracker_PT.dll
2ndDLL=None
[Filter]
DLL=FTNoIR_Filter_Accela.dll
[Curves-PitchDown]
point-count=2
point-0-x=4.75
point-0-y=11
point-1-x=16.25
point-1-y=89
[Curves-PitchUp]
point-count=4
point-0-x=5.25
point-0-y=11
point-1-x=13.5
point-1-y=44
point-2-x=23.5
point-2-y=81
point-3-x=49.75
point-3-y=92
[Curves-Roll]
point-count=2
point-0-x=10
point-0-y=17
point-1-x=49.25
point-1-y=46
[Curves-X]
point-count=2
point-0-x=5.25
point-0-y=10
point-1-x=20.75
point-1-y=98
[Curves-Y]
point-count=3
point-0-x=4.25
point-0-y=11
point-1-x=15
point-1-y=58
point-2-x=50
point-2-y=94
[Curves-Yaw]
point-count=2
point-0-x=4.5
point-0-y=8
point-1-x=24.5
point-1-y=179
[Curves-YawLeft]
point-count=2
point-0-x=4.25
point-0-y=9
point-1-x=25.25
point-1-y=179
[Curves-Z]
point-count=3
point-0-x=11.75
point-0-y=16
point-1-x=37.25
point-1-y=95
point-2-x=50
point-2-y=180
[KB_Shortcuts]
Joystick_GUID={9ba002d0-cd0e-11e6-8005-444553540000}
JoystickKey_Center=7
MouseKey_Center=0
Keycode_Center=76
Shift_Center=false
Ctrl_Center=false
Alt_Center=false
Disable_Beep=true
JoystickKey_GameZero=0
MouseKey_GameZero=0
Keycode_GameZero=0
Shift_GameZero=false
Ctrl_GameZero=false
Alt_GameZero=false
JoystickKey_StartStop=0
MouseKey_StartStop=0
Keycode_StartStop=201
Shift_StartStop=true
Ctrl_StartStop=true
Alt_StartStop=false
SetZero=false
SetEngineStop=false
JoystickKey_Inhibit=0
MouseKey_Inhibit=0
Keycode_Inhibit=87
Shift_Inhibit=false
Ctrl_Inhibit=true
Alt_Inhibit=true
Inhibit_Pitch=false
Inhibit_Yaw=false
Inhibit_Roll=false
Inhibit_X=true
Inhibit_Y=true
Inhibit_Z=false
Enable_ReverseAxis=true
RA_Yaw=90
RA_ZPos=0
RA_ToZPos=0
Enable_PeekLeft=false
Yaw_PeekLeft=-150
X_PeekLeft=-30
Enable_PeekLeftY=false
Y_PeekLeft=0
Enable_PeekRight=false
Yaw_PeekRight=150
X_PeekRight=30
Enable_PeekRightY=false
Y_PeekRight=0
[PointTracker]
CameraId=0
CameraF=@Variant(\0\0\0\x87?\x80\0\0)
CameraResX=320
CameraResY=240
CameraFPS=300
CameraRoll=0
CameraPitch=0
CameraYaw=0
PointExtractThreshold=32
PointExtractMinSize=5
PointExtractMaxSize=50
PointModelM01x=@Variant(\0\0\0\x87\0\0\0\0)
PointModelM01y=@Variant(\0\0\0\x87\x42 \0\0)
PointModelM01z=@Variant(\0\0\0\x87\xc1\xf0\0\0)
PointModelM02x=@Variant(\0\0\0\x87\0\0\0\0)
PointModelM02y=@Variant(\0\0\0\x87\xc2\x8c\0\0)
PointModelM02z=@Variant(\0\0\0\x87\xc2\xa0\0\0)
tMHx=@Variant(\0\0\0\x87\x43\x1a\x62P)
tMHy=@Variant(\0\0\0\x87\xc2\xb9\x9c@)
tMHz=@Variant(\0\0\0\x87\x42\xe5\x4@)
DynamicPoseResolution=true
VideoWidget=false
SleepTime=10
ResetTime=1000
EnableRoll=true
EnablePitch=true
EnableYaw=true
EnableX=true
EnableY=true
EnableZ=true
[PointTrackerDialog]
ActiveModelPanel=0
CustomM01x=0
CustomM01y=40
CustomM01z=-30
CustomM02x=0
CustomM02y=-70
CustomM02z=-80
ClipTopHeight=40
ClipTopLength=30
ClipBottomHeight=70
ClipBottomLength=80
CapHalfWidth=40
CapHeight=60
CapLength=100
[Accela]
Reduction=20
[FT]
UsedInterface=0
Reduction=20
[Curves-Accela-Scaling-Rotation]
point-count=4
point-0-x=0.10000000000000001
point-0-y=0
point-1-x=1.4299999999999999
point-1-y=2.4500000000000002
point-2-x=2
point-2-y=5.4400000000000004
point-3-x=2.0600000000000001
point-3-y=6
[FTIR]
useTIRViews=false
useDummyExe=true
[Curves-Accela-Scaling-Translation]
point-count=4
point-0-x=0.10000000000000001
point-0-y=0
point-1-x=1.4299999999999999
point-1-y=2.4500000000000002
point-2-x=2
point-2-y=5.4400000000000004
point-3-x=2.0600000000000001
point-3-y=6
Related
Wiki: Accela
Wiki: PointTracker