Menu
▾
▴
Re: [E-devel] problems to cross-compile EFL librairies
|
From: Carsten H. (T. R. <ra...@ra...> - 2009-12-10 08:49:19
|
On Thu, 10 Dec 2009 08:34:15 +0100 haithem rahmani <hai...@gm...>
said:
the directfb engine is pretty much not maintained. likely it will be killed off
in the future as it just isn't worth supporting. it hasnt been updated with new
evas features in a while. also xrender is likely to be killed off too.
> Hi all,
>
> the ecore autotools scripts seems not working
> attached is the config.h generated.
>
> as you can see the DirectFB support is not taken in considiration:
> /* Build Ecore_DirectFB Module */
> /* #undef BUILD_ECORE_DIRECTFB */
>
> /* Support for DirectFB Engine in Ecore_Evas */
> /* #undef BUILD_ECORE_EVAS_DIRECTFB */
>
> I'm not familiar with the autotools scripts that's why I'm not able to fix
> the problem.
>
> did anyone succeeded to build using DirectFB backend?
>
> regards.
> Haithem
>
> ---------- Forwarded message ----------
> From: haithem rahmani <hai...@gm...>
> Date: Fri, Dec 4, 2009 at 10:02 AM
> Subject: Re: [e-users] problems to cross-compile EFL librairies
> To: Carsten Haitzler <ra...@ra...>
> Cc: enl...@li...
>
>
> Hi again,
>
> It's fine now I built eina and evas correctly.
>
> but now I have a problem to compile ecore.
> I would like to enable the "evas-directfb" module for ecore but the
> configure is behaving in
> a stange way here what I did:
>
> $> ./configure --host=sh4-linux --prefix=/home/efl/ecore
> --disable-simple-x11 --disable-ecore-evas-software-buffer
> --disable-ecore-evas-software-buffer --disable-ecore-evas-software-x11
> --disable-ecore-evas-xrender-x11 --disable-ecore-evas-opengl-x11
> --disable-ecore-evas-software-16-x11 --disable-ecore-evas-xrender-xcb
> --disable-ecore-evas-software-gdi --disable-ecore-evas-software-ddraw
> --disable-ecore-evas-direct3d --disable-ecore-evas-opengl-glew
> --disable-ecore-evas-software-16-ddraw --disable-ecore-evas-quartz
> --disable-ecore-evas-software-sdl --disable-ecore-evas-fb
> --disable-ecore-evas-software-16-wince --without-x
> disabling all module except the "./configure --host=${target_arch}
> --prefix=/opt/STM/STLinux-2.3/devkit/sh4/target/root/rahmanih/efl/ecore
> --disable-simple-x11 --disable-ecore-evas-software-buffer
> --disable-ecore-evas-software-buffer --disable-ecore-evas-software-x11
> --disable-ecore-evas-xrender-x11 --disable-ecore-evas-opengl-x11
> --disable-ecore-evas-software-16-x11 --disable-ecore-evas-xrender-xcb
> --disable-ecore-evas-software-gdi --disable-ecore-evas-software-ddraw
> --disable-ecore-evas-direct3d --disable-ecore-evas-opengl-glew
> --disable-ecore-evas-software-16-ddraw --disable-ecore-evas-quartz
> --disable-ecore-evas-software-sdl --enable-ecore-evas-directfb
> --disable-ecore-evas-fb --disable-ecore-evas-software-16-wince --without-x
>
> I disabled all modules except the "ecore-evas-directfb".
>
> and here what I got in summay:
>
> Core:
> Ecore........................: always
> Ecore_Job....................: yes
> Ecore_Txt....................: yes
> Ecore_Con....................: yes
> OpenSSL....................: yes (disabled)
> GnuTLS.....................: yes
> CURL.......................: yes
> Abstract Sockets...........: yes
> Ecore_Ipc....................: yes
> OpenSSL....................: yes (disabled)
> GnuTLS.....................: yes
> Ecore_File...................: yes
> Inotify....................: yes
> Poll.......................: yes
> CURL.......................: yes
> Ecore_Config.................: no
> Ecore_IMF....................: yes
> Ecore_IMF_Evas...............: yes
> Ecore_Input..................: yes
> Graphic systems:
> Ecore_X (Xlib backend).......: yes
> Xcursor....................: yes
> Xkb........................: yes
> Xprint.....................: no
> Xinerama...................: no
> Xrandr.....................: yes
> Xscreensaver...............: yes
> Xrender....................: yes
> Xcomposite.................: yes
> Xfixes.....................: yes
> Xdamage....................: yes
> Xdpms......................: yes
> Xtest......................: yes
> Ecore_Win32..................: no
> Ecore_Quartz.................: no
> Ecore_SDL....................: no
> Ecore_FB.....................: no
> Ecore_DirectFB...............: no
> Ecore_WinCE..................: no
> Ecore Evas:
> Ecore_Evas...................: yes
> Software Memory Buffer.....: no
> Software X11...............: no
> XRender X11................: no
> OpenGL X11.................: no
> XRender XCB................: no
> Software GDI...............: no
> Software DirectDraw........: no
> Direct3D...................: no
> OpenGL Glew................: no
> Quartz.....................: no
> Software SDL...............: no
> DirectFB...................: no
> Software Framebuffer.......: no
> Software 16bit X11.........: no
> Software 16bit DirectDraw..: no
> Software 16bit WinCE.......: no
> but during the "check" phase of the configure I can see the following
> messages:
>
> checking whether ecore_x module is to be built... yes
> checking whether ecore_evas DirectFB support is to be built... yes
>
> why the ecore_x is getting compiled even if I had disabled it?
> and why the summary says that the DirectFB is won't be compiled?
>
> regards.
> Haithem.
> On Fri, Dec 4, 2009 at 7:37 AM, haithem rahmani <hai...@gm...
> > wrote:
>
> > Hi,
> > Thanks indeed.
> > Nice to know that EFL are being cross-compiled correclty.I was afraid that
> > the build
> > system was not tested fro crosscompilation.
> >
> > keep you informed.
> >
> > regards.
> >
> > Haithem.
> >
> > On Thu, Dec 3, 2009 at 11:42 PM, Carsten Haitzler
> > <ra...@ra...>wrote:
> >
> >> On Tue, 1 Dec 2009 11:35:28 +0100 haithem rahmani <
> >> hai...@gm...>
> >> said:
> >>
> >> smells to me like something is unclean in your cross-dev environment. as
> >> such
> >> eina is cross-compiled daily - as is pretty much all of EFL. for ARM
> >> mostly,
> >> but still - using anything from scratchbox to openemebdded and hand-rolled
> >> cross-dev setups. by the look of your output your cross-dev setup is not
> >> using
> >> a local sh4 target staging directory to find dependencies at all - it's
> >> just
> >> using the host system. i can't comment beyond that as i dont know your
> >> crossdev
> >> setup (and to be perfectly honest... it's not our job to fix your setup :)
> >> especially if we know it does work on a variety of cross-compiling
> >> environments
> >> for a variety of targets).
> >>
> >> so my suggestion is - take a closer look at your cross-compile setup
> >> (environement variables, maybe use a chroot for proper isolation or
> >> scratchbox2
> >> which uses ld_preload tricks etc.)
> >>
> >> > Hi all,
> >> > I'm trying to crosscompile the EFL librairies acutally only eina, evas
> >> and
> >> > ecore for a "sh4-linux" based platform, but I've got two problems:
> >> >
> >> > - Eina cross-compiles only with "--disable-shared" otherwise I've got
> >> the
> >> > following error:
> >> >
> >> >
> >> > /bin/sh ../../../../libtool --mode=install /usr/bin/install -c '
> >> > eina_chained_mempool.la'
> >> > '/opt/STM/STLinux-2.3/devkit/sh4/target/home/local/efl/lib/eina/mp/
> >> > eina_chained_mempool.la'
> >> > libtool: install: warning: relinking `eina_chained_mempool.la'
> >> > (cd /home//efl/eina-0.0.2.062/src/modules/mp/chained_pool; /bin/sh
> >> > ../../../../libtool --tag=CC --tag=disable-static --mode=relink
> >> > sh4-linux-gcc -std=gnu99 -O2 -no-undefined -module -avoid-version -o
> >> > eina_chained_mempool.la -rpath
> >> > /opt/STM/STLinux-2.3/devkit/sh4/target/home/local/efl/lib/eina/mp
> >> > eina_chained_mempool_la-eina_chained_mempool.lo ../../../../src/lib/
> >> > libeina.la -ldl -lrt -lm -pthread )
> >> >
> >> > sh4-linux-gcc -shared
> >> .libs/eina_chained_mempool_la-eina_chained_mempool.o
> >> > -Wl,-rpath
> >> -Wl,/opt/STM/STLinux-2.3/devkit/sh4/target/home//local/efl/lib
> >> >
> >> -L/opt/STM/STLinux-2.3/devkit/sh4/target/opt/STM/STLinux-2.3/devkit/sh4/target/home/local/efl/lib
> >> > -leina -ldl -lrt -lm -pthread -Wl,-soname -Wl,eina_chained_mempool.so
> >> -o
> >> > .libs/eina_chained_mempool.so
> >> >
> >> >
> >> /opt/STM/STLinux-2.3/devkit/sh4/lib/gcc/sh4-linux/4.2.4/../../../../sh4-linux/bin/ld:
> >> > cannot find -leina
> >> > collect2: ld returned 1 exit status
> >> > libtool: install: error: relink `eina_chained_mempool.la' with the
> >> above
> >> > command before installing it
> >> >
> >> > - It seems that the "libtool" is using the "LIBTOOL_PREFIX_BASE" twice ?
> >> > - why there is this "link command" during the install phase ? is it
> >> possible
> >> > to move it during the build?
> >> >
> >> >
> >> > - Once Eina built in "static mode" I've problem to build evas : the
> >> problem
> >> > is related to freetype:
> >> >
> >> >
> >> > /bin/sh ../../libtool --tag=CC --mode=link sh4-linux-gcc -O2
> >> > -D_GNU_SOURCE -no-undefined -version-info 9:9:9 -release ver-svn-03 -o
> >> > libevas.la -rpath
> >> /opt/STM/STLinux-2.3/devkit/sh4/target/home/local/efl/lib
> >> > main.lo canvas/libevas_canvas.la file/libevas_file.la
> >> > cache/libevas_cache.laimaging/
> >> > libevas_imaging.la cserve/libevas_cserve.la engines/common/
> >> > libevas_engine_common.la -ldl -lfreetype -lz -lfontconfig -lpthread
> >> > -L/opt/STM/STLinux-2.3/devkit/sh4/target/home//local/efl/lib
> >> > -leina -lm
> >> > /bin/grep: /usr/lib/libfreetype.la: No such file or directory
> >> > /bin/sed: can't read /usr/lib/libfreetype.la: No such file or directory
> >> > libtool: link: `/usr/lib/libfreetype.la' is not a valid libtool archive
> >> >
> >> >
> >> > any help please ?
> >> >
> >> > regards.
> >> >
> >> > Haithem.
> >> >
> >> ------------------------------------------------------------------------------
> >> > Join us December 9, 2009 for the Red Hat Virtual Experience,
> >> > a free event focused on virtualization and cloud computing.
> >> > Attend in-depth sessions from your desk. Your couch. Anywhere.
> >> > http://p.sf.net/sfu/redhat-sfdev2dev
> >> > _______________________________________________
> >> > enlightenment-users mailing list
> >> > enl...@li...
> >> > https://lists.sourceforge.net/lists/listinfo/enlightenment-users
> >> >
> >>
> >>
> >> --
> >> ------------- Codito, ergo sum - "I code, therefore I am" --------------
> >> The Rasterman (Carsten Haitzler) ra...@ra...
> >>
> >>
> >
>
--
------------- Codito, ergo sum - "I code, therefore I am" --------------
The Rasterman (Carsten Haitzler) ra...@ra...
|
