[Emc-commit] [LinuxCNC/linuxcnc] 25ac3d: Revert "motion: avoid duplicate terminal outputs f...

[andypugh <no...@gi...>]

  Branch: refs/heads/master
  Home:   https://github.com/LinuxCNC/linuxcnc
  Commit: 25ac3dab2d72eb1b685293faf2045c4faeaf95d1
      https://github.com/LinuxCNC/linuxcnc/commit/25ac3dab2d72eb1b685293faf2045c4faeaf95d1
  Author: Hannes Diethelm <han...@gm...>
  Date:   2026-06-03 (Wed, 03 Jun 2026)

  Changed paths:
    M src/emc/motion/motion.c

  Log Message:
  -----------
  Revert "motion: avoid duplicate terminal outputs for RTAPI_MSG_ERROR messages"

This reverts commit 47324a78687b6edf667129e5b261883ba6e8927e.


  Commit: e0d88b89f91c3c536090482a4e6f8df70220ac94
      https://github.com/LinuxCNC/linuxcnc/commit/e0d88b89f91c3c536090482a4e6f8df70220ac94
  Author: Hannes Diethelm <han...@gm...>
  Date:   2026-06-03 (Wed, 03 Jun 2026)

  Changed paths:
    M src/hal/drivers/mesa-hostmot2/hm2_modbus.c

  Log Message:
  -----------
  Revert "Fix printing hm2_modbus messages at startup."

This reverts commit 65e2269723875ae369d094c654abb871c0236cb1.


  Commit: a39cb499ac418419245e4db4797586cf6d2103ad
      https://github.com/LinuxCNC/linuxcnc/commit/a39cb499ac418419245e4db4797586cf6d2103ad
  Author: Hannes Diethelm <han...@gm...>
  Date:   2026-06-03 (Wed, 03 Jun 2026)

  Changed paths:
    M src/hal/drivers/mesa-hostmot2/hm2_modbus.c

  Log Message:
  -----------
  Reapply some changes in hm2_modbus.c


  Commit: 4de2e5aa8ca1adb18aba2ebc9ef3797344896a78
      https://github.com/LinuxCNC/linuxcnc/commit/4de2e5aa8ca1adb18aba2ebc9ef3797344896a78
  Author: Hannes Diethelm <han...@gm...>
  Date:   2026-06-03 (Wed, 03 Jun 2026)

  Changed paths:
    M src/emc/motion/motion.c

  Log Message:
  -----------
  Fix error messages are not shown

The last two reverts fix the issue. This commit describes why there is
no good workaround against showing errors twice.


  Commit: c3c06c6de67eebec154679c99f94b85f5acae52e
      https://github.com/LinuxCNC/linuxcnc/commit/c3c06c6de67eebec154679c99f94b85f5acae52e
  Author: Hannes Diethelm <han...@gm...>
  Date:   2026-06-04 (Thu, 04 Jun 2026)

  Changed paths:
    M src/emc/motion/motion.c
    M src/emc/motion/stashf.c
    M src/emc/motion/usrmotintf.cc
    M src/emc/task/taskintf.cc

  Log Message:
  -----------
  Fix error messages are shown twice

Instead of inhibiting old_handler() we always use old_handler() for
console in real time context and inhibit print to console for messages
passed from realtime to milltask.


  Commit: a6cc37a99017556e4f0e8e09058cc929a46293bd
      https://github.com/LinuxCNC/linuxcnc/commit/a6cc37a99017556e4f0e8e09058cc929a46293bd
  Author: andypugh <an...@bo...>
  Date:   2026-06-07 (Sun, 07 Jun 2026)

  Changed paths:
    M src/emc/motion/motion.c
    M src/emc/motion/stashf.c
    M src/emc/motion/usrmotintf.cc
    M src/emc/task/taskintf.cc
    M src/hal/drivers/mesa-hostmot2/hm2_modbus.c

  Log Message:
  -----------
  Merge pull request #4116 from hdiethelm/fix_errors_not_printed

Fix errors not printed


Compare: https://github.com/LinuxCNC/linuxcnc/compare/34bd6d666622...a6cc37a99017

To unsubscribe from these emails, change your notification settings at https://github.com/LinuxCNC/linuxcnc/settings/notifications