From: Charles B. <rij...@gm...> - 2013-10-17 22:46:06
|
This might vary if you have a gantry. I have found back/right/top makes for easier workpiece loading in an enclosed gantry. Charles On Thu, Oct 17, 2013 at 4:31 PM, Steve Blackmore <st...@pi...> wrote: > On Thu, 17 Oct 2013 11:19:35 -0400, you wrote: > > >My approach ... > > > >Put the table in position and walk up to it like you are going to > >operate it... > >The bottom left hand corner - the corner nearest your left hand should > >be the origin. X increases to the right. Y increases away from you. > >If you do that you will have a "standard" layout and anyone else who > >walks up to the machine will find the machine familiar. > > > >That will also make everything on the CNC screen look right and it will > >jive with your Cad thinking also... > > Mine too. > > Steve Blackmore > -- > > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most > from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc...@li... > https://lists.sourceforge.net/lists/listinfo/emc-users > |