[Emc-developers] AXIS fails to load after recent commit

[Chris M. <chr...@ho...>]

After commit 33380c4b was applied AXIS will not run for me.
Other GUIs run though (Gscreen, TK, TOUCHY)
I get this:

task pid=2808
emcTaskInit: using builtin interpreter
store_named_parameter: level[0] _vmajor value=2.600000
store_named_parameter: level[0] _vminor value=0.000000
store_named_parameter: level[0] _line value=0.000000
store_named_parameter: level[0] _motion_mode value=1.000000
store_named_parameter: level[0] _plane value=2.000000
store_named_parameter: level[0] _ccomp value=3.000000
store_named_parameter: level[0] _metric value=4.000000
store_named_parameter: level[0] _imperial value=5.000000
store_named_parameter: level[0] _absolute value=6.000000
store_named_parameter: level[0] _incremental value=7.000000
store_named_parameter: level[0] _inverse_time value=8.000000
store_named_parameter: level[0] _units_per_minute value=9.000000
store_named_parameter: level[0] _units_per_rev value=10.000000
store_named_parameter: level[0] _coord_system value=11.000000
store_named_parameter: level[0] _tool_offset value=12.000000
store_named_parameter: level[0] _retract_r_plane value=13.000000
store_named_parameter: level[0] _retract_old_z value=14.000000
store_named_parameter: level[0] _spindle_rpm_mode value=15.000000
store_named_parameter: level[0] _spindle_css_mode value=16.000000
store_named_parameter: level[0] _ijk_absolute_mode value=17.000000
store_named_parameter: level[0] _lathe_diameter_mode value=18.000000
store_named_parameter: level[0] _lathe_radius_mode value=19.000000
store_named_parameter: level[0] _spindle_on value=20.000000
store_named_parameter: level[0] _spindle_cw value=21.000000
store_named_parameter: level[0] _mist value=22.000000
store_named_parameter: level[0] _flood value=23.000000
store_named_parameter: level[0] _speed_override value=24.000000
store_named_parameter: level[0] _feed_override value=25.000000
store_named_parameter: level[0] _adaptive_feed value=26.000000
store_named_parameter: level[0] _feed_hold value=27.000000
store_named_parameter: level[0] _feed value=28.000000
store_named_parameter: level[0] _rpm value=29.000000
store_named_parameter: level[0] _current_tool value=30.000000
store_named_parameter: level[0] _current_pocket value=32.000000
store_named_parameter: level[0] _selected_pocket value=31.000000
store_named_parameter: level[0] _selected_tool value=45.000000
store_named_parameter: level[0] _x value=33.000000
store_named_parameter: level[0] _y value=34.000000
store_named_parameter: level[0] _z value=35.000000
store_named_parameter: level[0] _a value=36.000000
store_named_parameter: level[0] _b value=37.000000
store_named_parameter: level[0] _c value=38.000000
store_named_parameter: level[0] _u value=39.000000
store_named_parameter: level[0] _v value=40.000000
store_named_parameter: level[0] _w value=41.000000
store_named_parameter: level[0] _value value=42.000000
store_named_parameter: level[0] _value_returned value=46.000000
store_named_parameter: level[0] _task value=47.000000
store_named_parameter: level[0] _call_level value=43.000000
store_named_parameter: level[0] _remap_level value=44.000000
/home/chris/emc2-dev/scripts/linuxcnc: line 716:  2809 Segmentation fault      $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS

If I build before this commit AXIS runs fine.
Just me?

Chris M