From: Sebastian K. <gi...@gi...> - 2012-05-24 04:32:46
|
To un-confuse your coordinate system, un-rotate it The very helpful "When You're Lost" section neglected to un-rotate the G54 coordinate system, so I was still lost. This corrects the omission. http://git.linuxcnc.org/?p=emc2.git;a=commitdiff;h=c0ca124 --- docs/src/common/User_Concepts.txt | 2 +- docs/src/common/User_Concepts_de.txt | 2 +- docs/src/common/User_Concepts_es.txt | 2 +- docs/src/common/User_Concepts_fr.txt | 2 +- docs/src/common/User_Concepts_pl.txt | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/src/common/User_Concepts.txt b/docs/src/common/User_Concepts.txt index cef6ea8..716c83e 100644 --- a/docs/src/common/User_Concepts.txt +++ b/docs/src/common/User_Concepts.txt @@ -276,7 +276,7 @@ them. - Clear any G92 offset with G92.1 - Use the G54 coordinate system with G54 - Set the G54 coordinate system to be the same as the - machine coordinate system with G10 L2 P1 X0 Y0 Z0 + machine coordinate system with G10 L2 P1 X0 Y0 Z0 R0 - Turn off tool offsets with G49 - Turn on the Relative Coordinate Display from the menu diff --git a/docs/src/common/User_Concepts_de.txt b/docs/src/common/User_Concepts_de.txt index 06e903c..c50461c 100644 --- a/docs/src/common/User_Concepts_de.txt +++ b/docs/src/common/User_Concepts_de.txt @@ -276,7 +276,7 @@ them. - Clear any G92 offset with G92.1 - Use the G54 coordinate system with G54 - Set the G54 coordinate system to be the same as the - machine coordinate system with G10 L2 P1 X0 Y0 Z0 + machine coordinate system with G10 L2 P1 X0 Y0 Z0 R0 - Turn off tool offsets with G49 - Turn on the Relative Coordinate Display from the menu diff --git a/docs/src/common/User_Concepts_es.txt b/docs/src/common/User_Concepts_es.txt index 06e903c..c50461c 100644 --- a/docs/src/common/User_Concepts_es.txt +++ b/docs/src/common/User_Concepts_es.txt @@ -276,7 +276,7 @@ them. - Clear any G92 offset with G92.1 - Use the G54 coordinate system with G54 - Set the G54 coordinate system to be the same as the - machine coordinate system with G10 L2 P1 X0 Y0 Z0 + machine coordinate system with G10 L2 P1 X0 Y0 Z0 R0 - Turn off tool offsets with G49 - Turn on the Relative Coordinate Display from the menu diff --git a/docs/src/common/User_Concepts_fr.txt b/docs/src/common/User_Concepts_fr.txt index 5974ecb..547908e 100644 --- a/docs/src/common/User_Concepts_fr.txt +++ b/docs/src/common/User_Concepts_fr.txt @@ -272,7 +272,7 @@ Pour cela: - Supprimez tous les décalages _G92_ avec _G92.1_ - Utilisez les coordonnées utilisateur avec _G54_ - Rendez les coordonnées utilisateur _G54_, identiques aux - coordonnées machine avec _G10 L2 P1 X0 Y0 Z0_ + coordonnées machine avec _G10 L2 P1 X0 Y0 Z0 R0_ - Annulez les offsets d'outil avec _G49_ - Activez l'affichage des coordonnées relatives depuis le menu. diff --git a/docs/src/common/User_Concepts_pl.txt b/docs/src/common/User_Concepts_pl.txt index 06e903c..c50461c 100644 --- a/docs/src/common/User_Concepts_pl.txt +++ b/docs/src/common/User_Concepts_pl.txt @@ -276,7 +276,7 @@ them. - Clear any G92 offset with G92.1 - Use the G54 coordinate system with G54 - Set the G54 coordinate system to be the same as the - machine coordinate system with G10 L2 P1 X0 Y0 Z0 + machine coordinate system with G10 L2 P1 X0 Y0 Z0 R0 - Turn off tool offsets with G49 - Turn on the Relative Coordinate Display from the menu |