Re: [Emc-users] Could not open command file 'joypad_V3.hal'

[yann <bri...@fr...>]

Le vendredi 4 décembre 2009 16:48:45, Chris Epicier a écrit :
> Hi all
> 
> I am looking forward to obtain my logitech rumblepad II wireless. Meanwhile
>  I want to use my logetch joypad 2. So I looked at this
> 
> http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Using_A_Joypad_To_Move_Your_CNC
> _Machine
> 
> and at the file  joypad_V3.hal that I found on my emc 2.3.4.1 install. As
>  noted in joypad_V3.hal, I edited my cnc.ini as follows:
> 
> "
> ...
> [HAL]
> HALUI = halui
> HALFILE = CNC.hal
> #HALFILE = custom.hal
> HALFILE = joypad_V3.hal
> #HALFILE = /home/ck/emc2/configs/CNC/joypad_V3.hal
> POSTGUI_HALFILE = custom_postgui.hal
> #HALFILE = joypad_V3.hal
> ...
> "
> 
> when i start emc2 I get Could not open command file 'joypad_V3.hal'
> 
> the file is in my emc2/configs/cnc directory, as is cnc.ini, read
>  permissions are set chmod ugo+r joypad_V3.hal
> 
> So why does it not find  'joypad_V3.hal'?
> 
> greets chris
> 

Try to uncomment (remove the #) ont the line with the full joypad_V3.hal path, 
and comment the line with only the filename.